The aim of this study was to gain insight into how two enterprises work with competence development and thereby study how the relationship between competence development and workers, employees, look like. The focus was on the workers motives and motivation towards a participation in a competence development course, their attitude to education, and how the transfer of skills gained from the course, into the workplace looks like. Further on, the work situations influence on the workers competence development has been taken into account.In the study, six people were interviewed in the role of either manager, coach or course participant who are employed in two different enterprises in the south of Sweden.The results showed that the participants were motivated by a strive for personal development or that the participants viewed education implementation as a part of the professionalcareer, which has resulted in a positive attitude towards the competence development course. The managers? motive for decisions about education was to change the prevailing attitude among the staff for the better and thereby strengthen the company?s brand. The work situation has encouraged the desire to participate in developmental education as the feeling of control has encouraged the workers to further development.

Introduction: Dental health globally is not equally distributed as shown by caries prevalence is higher in areas with more immigration outside Scandinavia and Western Europe and areas with lower socioeconomic status. To reduce the health inequalities in Borås, a dental health project was made in five kindergartens in the district Hässleholmen. Purpose: The purpose of the survey was, by interviews with the actors involved (teachers, children, parents and the public dental service) find out the views of the project, and whether the project is relevant and should continue. Method: The method used was qualitative interviews with the actors involved in dental health project. A total of 21 interviews were then consolidated by a qualitative content analysis.

For many years, there has been a housing shortage in Sweden. Many have been expecting a construction boom in the housing sector, but that has yet to arrive. With the current legislations and guidelines surrounding modern, energy efficient housing; production costs have increased dramatically in recent years. As a result, having a negative effect on housing production despite the high demand for homes.This exam work is carried out on a construction project of Sjötorpshus AB and its purpose is to evaluate how to optimise the construction process for the production of a new residential settlement, "Kv.Hunden", located in Katrineholm. In an interview with the company's MD, Pär Knutsson, four main issues were defined to focus on.

If one looks at physical planning in Sweden today one can see that while talking about densification of existing development, reduced emissions and careful use of important land, urban sprawl is a fact with development of sheer residential districts in the urban edges and shopping malls in each and every municipality. As sustainable development is an essential goal for physical planning to strive towards, it is worth questioning if the direction of today?s planning will lead to the goal. A sustainable development can be seen as an obvious to goal aim at. In reality the aim means a hard and complex work.

2013 a decision was made that all projects at the Swedish Transport Administration shoulduse BIM (Building Information Modeling) to some extent from 2015. BIM is an approachthat allows for streamlining of projects by the use of a 3D-model created in an early stage ofthe project. The 3D-model can carry information about the facility throughout its life cyclefrom planning to management. The use of a 3D-model can help the project to detect errors inearly stages of the project when it is easy and cheap to fix the error instead of finding theerror in the construction phase when it is costly and time consuming to fix it. 3D-models alsolead to improved communication both within the project groups and with the public.

I dagsläget är det svårt för företag att behålla en stark marknadsposition och utmaningen ligger dels i att regelbundet presentera nya produkter på marknaden och ständigt skapa nya innovationer. Genom att använda sig av Lean Product Development i produktutvecklingsprocessen kan företagen anta utmaningen. Det kan dock vara svårare för små och medelstora företag då de kan ha begränsade resurser. Syftet med denna studie var därför att ta fram en projektmodell för produktutvecklingsprojekt i små och medelstora företag. Studien bygger på kvalitativa forskningsmetoder där sekundärdata samlades in genom både bibliotekskatalogen vid Mittuniversitetet och sökningar i forskningsdatabaser på Internet.

 The purpose with this thesis was to develop a designguideline which will simplify the development of new products that will be laser welded. The need for this thesis has come forward from the quality problems that Volvo Construction Equipment, Components Division is having with their laser welding manufacturing unit. The reason for the problems emerges from the bad communication between the development unit and the manufacturing unit within the company when the products produced today was developed. This resulted in products that were hard to and in some cases almost impossible to weld. To avoid these problems from occurring again it was needed to gather the experiences within this area and compile it and present in a brief a pedagogical manner. The information for the groundwork of our results has been gathered by interviews of several key persons in Volvo Construction Equipment, Components Division.

This report is the written part of a bachelorthesis on the computer engineering program atUniversity of Halmstad. The project was a cooperate project that where done together withFree2move Holding AB. Free2move is a company with eight employees in Sweden and four inMalaysia. The company is today developing Bluetooth modules and RFID chips. The market forthis kind of products is growing very rapidly, last year it grew 71 percent.

ABSTRACT:The aim of this essay is to analyze whether the development of the Principles of War in small states´ doctrine has been influenced by the doctrinal development of alliances after the start of an international cooperation.The author suggests that the development of the Principles of War can be understood through theories of doctrinal development. The theory used for this analysis states that small states depend on alliances, such as NATO, and therefore adapt their doctrine to better match the doctrine of the alliance. Since the Principles of War are the foundation of doctrine, such an adaption should lead to an adaption of the Principles of War as well.The analysis will be made using Swedish Army field manuals as a basis. These will be compared to NATO´s, in order to see whether or not Sweden has adapted its Principles of War following its membership of the Partnership for Peace.The results show that today the Swedish Principles of War are more similar to NATO´s than they were in 1982, which suggests that they have been adapted to better match those used by NATO. Although this essay does not analyze the reasons why, the results imply that theories of doctrinal development also include the development of principles of war.

Current technology offers many possibilities for remotecommunication. Nevertheless, people with cognitive and communicativedisabilities have limited access to common communication technology like textmessaging via a mobile phone. This study is part of the project Text messagingwith picture symbols - a possibility for AAC users and people with cognitiveimpairments. Semi structured interviews were used to investigate three menand four women?s experiences of using Windows mobiles with adaptedfunctions for text messaging.

This exam work has been done for an external client, Snickars Records a record shop specialized in vinyl records with a niches in dance music. The shop is located at Heleneborgsgatan 5A södermalm, Stockholm. The client was in a big need for a new webshop due to the old one was missing a lot of functionality. The project resulted in an almost complete product that?s ready to be implemented and was built after the specifications that was set together with our client.

The purpouse of this study is to find out how and if a Content Managment System (CMS) can benefit from applied User Experience Design (UX). A work project has been executed where a client wanted the students to create a user friendly CMS for adding content to a global hotel review site. A prototype of a CMS was created based on literature studies about UX and CMS. The prototype of the user friendly CMS was then tested through user tests and interviews with key users. After input from the key users the prototype was changed until the users were satisfied with it..

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

Current technology offers many possibilities for remotecommunication. Nevertheless, people with cognitive and communicativedisabilities have limited access to common communication technology like textmessaging via a mobile phone. This study is part of the project Text messagingwith picture symbols - a possibility for AAC users and people with cognitiveimpairments. Semi structured interviews were used to investigate three menand four women?s experiences of using Windows mobiles with adaptedfunctions for text messaging.