Assisted living is a relatively new form of housing that received a government definition in 2007 in conjunction with a government appointed investigation of future alternative accommodation for senior citizens. The type of accommodation is intended for seniors who have the need for increased security, which may be a consequence of that they feel anxious or lonely. It concerns ordinary homes with qualities that suit needs of seniors. There is no allowance from the local municipality required in order for seniors to apply for these homes and so assisted living should not be confused with nursing homes/ sheltered housing. The purpose of this study is to identify success factors for a winning concept for assisted living in the Gothenburg region, on behalf of Skanska Project development.

The company LightLift Esystems AB manufactures patented motorized lift systems for the illumination of halls with high ceilings. The company wants a new design for singular heavy lights in order to be more competitive.This project consists of the development of the new design under the requirements and specifications imposed by the company. The new design must support lights up to 300kg and keep the overall dimensions as low as possible without modifying the driving unit.This document contains all the designing steps followed to reach the final solution as well as the material selection, manufacturing process and assembly of all the parts that form it.The solution obtained shows to be very competitive with other alternative products, since this new design triples their maximum load capacity while the dimensions are very similar.In this context, the optical appearance was also very important to the company and so it was another main objective of this project. From an aesthetical point of view, the final solution proves to be very compact and versatile since it can either be hidden behind a false ceiling or covered by a plastic case that gives the design a very nice look.Finally, the solution achieved fulfils all the requirements and specification previously imposed. It is reliable, compact, cheap to manufacture, easy to assembly and it has a good optical appearance. .

The debate in the media on a new Swedish sex education movie sparked our interest in this study. The twenty-eight minutes long movie ?Sex on the map? is the first of it?s kind in twenty-five years. It is also part of a bigger sex educational project that contains, apart from the movie, a book about sex education, a documentary and a teachers guide. The project is a co-production between the Swedish Educational Broadcasting Company (UR) and the Swedish Association for Sexuality Education (RFSU).We were interested in how teachers received information about the project, and what their attitudes were towards it.

Background: The Swedish Police authorities have accomplished several changes the last years. We have studied one of these changes, the co-ordination of two supporting functions, economy and staffadministration at the Police authorities in Östergötland, Jönköping, Södermanland and SKL (Swedish crime technical laboratory). The initiative to this change was taken in 2002 and in 2003 a decision was made to create a joint servicecenter.Purpose: The purpose of this rapport is, in a collaborator perspective, to study the employees´ experiences of the change process.Method: The empirical material was collected throw interviews with the employees who have taken part in the change process. Even the leader of the project has been interviewed.Results: We have distinguished five central aspects in the change process. These are information/communication and understanding, the project leader, teamwork, timeaspect/reflexion and the leadership.

Sweden introduced a development assistance policy in 1952 and thirteen years later Sida, Swedish International Development Cooperation Agency started, in 1965. But in 1995, five separate development assistance authorities came together and established the new Sida as it is today. Sida is Sweden?s representative in the development assistance policy field and they work through projects that have to be presented through a Country Strategy Process (CSP). The aim of this paper is to point out Sida?s perspective on the conducted development assistance policy and what guide lines that are followed.

As requested by the company Husqvarna AB, we have developed a prototype of an electrical start device to a chainsaw. This was done through the development of new details in Catia, which has been integrated with existing details. Electrical components have been purchased by HAB electronics. In parallel with the modeling calculations was done, which was the basis for determine dimensions and the choice of an electric motor and gears. Prototype 1 improved gradually and led to prototype number 2, which became the final result.

This study examines how and why organizations evaluate training and development within the organizations. The study has a qualitative approach based on semi-structured interviews, with office and organization development managers. The purpose of the study is to contribute with knowledge about how three large Swedish organizations evaluates training and development programs for staff members. Another purpose is to describe why the organizations evaluate training and development programs and to research if there is a further need to develop the organization evaluation methods. Therefore the research questions are Why and how do organizations evaluate training programs? What further need is there to develop organizations evaluation methods?The conclusion of this study shows that evaluation of the training and development programs are not a high priority among the selected organizations.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

In recent time, agile methods have been devoted much attention, and the concept is widely used in the IT industry in particular. An increasing number of companies are interested in this way of working. The following report is the result of a study on the ability to create value for customers in business development through the use of agile methods. We ask what the advantages and limitations of agile methods are in the creation of customer value. Grounded Theory and an initial literature review was used to answer this question.

This project has been made in cooperation with Stora Enso Research Centre Falun (Research). Thebackground of the project is that Research has customers who demand a method to measure the quantityof varnish online in offset printing. The aim with the project is to investigate if any test method correlateswith the quantity of varnish and to improve the understanding of the variables in the varnishingunit. The goal with the project is to develop a functional method. Two printing trials have beenperformed.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

The purpose of my study is to question the model service marketing triangle and propose an alternative ways of looking at service marketing. The study is based on a deep, qualitative research. In the research of the material an abductive approach has been used. The primary information sources are interviews with project workers, which are being analyzed together with the theoretical background in part argumentations in the course of the thesis. In the last chapter they are unified.

The purpose of this essay is to examine if the municipality has a real freedom of action to control the use of the land and the shaping of the buildings in a large and prestigious building project.In Karlstad there is now (2006) a large building project in form of a shopping mall. This project is in its final stage of completion and offers me a suitable case to examine. To undertake the purpose of the essay, the following research question is formulated:Do the municipality have a real freedom of action to control the use of the land and the shaping of the buildings in a large and prestigious building project as the Mitt I City project?In an attempt to examine the project and the planning process, three themes are applied. The first theme derives from the hypothesis that the part that initiate the process gets the upper hand as future discussions are taking place in relation to the original ideas.

Automationscenter & Bråvalla Elteknik AB is a company that offers the market completed total solutions where the customer can operate and monitor their production from the terminal. In these total solutions they lack standard circuit which are developed by the company and which could manoeuvre/control/monitor controlled process objects. This report defines the work of developing the most common standard circuits.The report is initiated by a short theoretical part about PLC and the PLC system, with a connected terminal, which has been used. Thereafter, the turnout of the demands of specification is reported, after discussing with the supervisor in the course of the project. The report concludes with a disclosure of how the programming, the documentation and the testing have proceeded and a final discussion concerning the project and proposals on continuation.The result is a CD with the documentation of standard circuits and how they are implemented in a new project.