My project is an interpretation and exploration of the book The Invisible Cities by Italo Calvino. It is a play on the swedish words for cities and beaches. By adding the letters R and N the word for cities in the title transforms into the word for beaches. The project is equal parts a color investigation and an exploration of new working methods as it is an development of my approch to graphic design. My aim was to, through a visual, conceptual and playful investigation create a new interpretation of the book The Invisible Cities.

Together with Hälsoteknikalliansen the project team recognized the need to improve availability in the staircase environments. This is a difficult environment, especially for our elderly. The staircase leading to and from apartments is such a major obstacle that many people do not dare to go into the staircase leading to their front door. The market study that the project team conducted showed that many were in need of a living support, often a relative, who helped and supported them when they went into these stairs. It also appeared that these people manage everyday life just fine, but they suffer the problems that stairs to and from their apartment causes.

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.

The idea for this project was initiated together with one of the leaders in the forest, paper and packaging industry. To get through an A/R CDM process the company is exposed to the risk of failing the process or that the overall costs will exceed the benefits of the project. This would delete the incentives to invest in GHG removals compared to purchasing emission allowances on the carbon market. The questions that have been raised and needs clarification in the thesis are the following:? From a company perspective, what are the incentives for implementing Forest Clean Development Mechanism (CDM) projects?? What is a likely financial outcome of a reforestation CDM project on degraded land in the Guangxi province of the Peoples Republic of China?? When does an investment like this break even with the cost of buying market based carbon emission allowances? The objective of this master thesis is to carry out a research about the incentives for forest, paper and packaging companies to invest in reforestation through the clean development mechanism.

This thesis project is a vision of an identity building in Gothenburg, situated on the pier called Bananpiren. The purpose of the project is to create interest and stimulate discussions around the place and the building.In order to gain inspiration of what such a place can contain and express, a number of similar projects have been analysed, for example the Sydney Opera and the Yokohama International Port Terminal.A number of suggestions was then created and analysed, all of which are presented in chronological order in order to show the rejections and the developed designs that resulted in the final formation to proceed with.The result was finalised in a number of presentation images of the project that can be used by Cullbergs Arkitektkontor AB when presenting the project..

This report contains a degree project made by the mechanical engineering students Lennart Andersson and Daniel Jansson. The project has performed in assignment by SOMAS Valves AB in Säffle. SOMAS are leading in development on control and on/off valves. To maintain this position they always want to improve their products. One way in this development is valves that are more tightened.The purpose with our project was to investigate another seat design on a HiCo (High Cobalt Alloy) seat to a SKV 150 PN 25 valve and compare this to an original HiCo seat.By modifying the seat on a ball valve we want to achieve a valve that leaks lesser then a valve whit original seat.

This project is implemented as a thesis at the Royal Institute of Technology in the master?s degree program Integrated Product Design and Industrial Design Engineering. The project has involved development and efficiency of a free starter package for expectant parents with useful content consisting of useful products for both before and after childbirth. Areas that have been investigated include packaging development, service design and appropriate content for the package.During the work, theory about packaging design, materials, manufacturing techniques and logistics have been processed to base the further work on. The project process has involved competitor analysis and interviews with store owners and customer surveys, that have been conducted to identify areas for improvement of the current solution.

AbstractToday, too many construction projects are delayed and deviates from the budget. Agood project management is the basis for successful construction project. The mostcommon planning methods in the construction industry is currently Gantt chart andCPM. The problem with these is that focus is only at the time of the project anddoesn?t handle the budget.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

The purpose of this paper is to standardize and simplify the design work on a few specific types of storage brackets for balconies. The company Balco AB had the wish to simplify the design work in the preparation of attachments to their balcony structures. This would be done by a calculation matrix that could be produced which then in turn could be used for each new project by the company. The design work behind the development of these fittings at each new project is costly both in terms of time devoted by each calculation but also the cost of the time. The purpose of this report is that in a systematic manner, a calculation matrix can be created that then the company instead may follow from each new project.In carrying out the project used HILTI calculation program, which was provided by the company HILTI.

The Master Thesis has been carried out in cooperation with Silva Sweden AB and the objective was to develop a new product concept within the product category for everyday exercise. The purpose of the thesis was to use and analyze methods and tools which aid creativity and concept creation in order to make method recommendations for future projects.During the thesis a number of customer needs were identified, which in turn were translated into 20 concepts. On a concept decision meeting a pedometer-based concept was chosen for development. The new pedometer is in addition to counting steps also able to measure and calculate the user?s total climbed height during a day and present this graphically in comparison to famous monuments or distances.

This study has been performed at a smaller high school and with its industry students, the high school is located in a small industrial community. The purpose of my study has been to find out what students think about their work with the project work, what they think has been positive and negative, how their motivation is influenced by the work on the project and if the work has been affected by factors outside the school world.The interviews have been carried out like normal conversation with open questions. The students who participated in the study comes from the school where I did my internship. The selection was done by asking all students from a specific course, those who were positive to participate are also the ones I have chosen to interview. My main study results, in summary, described as the students, once they were inside their work were positive to the project work and felt motivated in their work. Negative experiences, for the students which attend a practical program, has mainly been economic, as the school does not provide any financial support.

A large number of system development projects are allowed to proceed for too long, and leads to undesirable project outcomes. Research shows that more than half of the authorities involved reported that at least one of their projects have exceeded their budget, and that a third of all the projects had exceeded the budget. This problem led to the following research question: ?Which factors can explain projects continued escalation within public authorities?? To answer the question, a qualitative case study of the Swedish police?s implementation of PUST, a sort of case management system was conducted. The project received considerable media attention and a large amount of criticism was directed towards the project, partly because the project exceeded the timeframe and budget set at the start.

The shooting sport is one of the most widespread sports in the world and it isbeing practice in most countries. Based on their own experiences, in competition -and hobby shooting, the client M4Solutions found a demand and need for ashooting target that is manufactured in Sweden.The purpose of the project has been to develop, with the help of Marcus Walldén,two shooting targets from idea to finished product. These two shooting targets,Plate Rack Target and Dueling Tree, would each be equipped with a mechanicalresetting system but will in the future have the ability to be provided with anelectronic resetting system.The project from the client was divided into two theses. One of these two, writtenby Marcus Walldén, focused on the tripod parts and the overall design work forboth Plate Rack Target and Dueling Tree. The thesis that is presented in thisreport have focused on resetting systems, the design of protective plates and otherperipherals for both shooting targets.This work has primarily been in CAD environment where design, constructionand development has been given free rein.

This degree project aims to investigate the potential and possibilities for conceptual energyanalyses in the early stages of the design process. Many key decisions are made in theearly stages of a project regarding the shape and orientation of the building. Conceptualenergy analyses can provide the architects with insight regarding different design option?srelative energy performance.As the demands for more sustainable buildings increases, so does the need for earlyenergy analyses. Performing analyses in the early stage requires many assumptions andguesswork which could lead to a large margin of error.The offering from Autodesk is a module in Revit Architecture/MEP and the stand aloneprogram Project Vasari (under development).