The European bison is a species which is no longer present in the wild fauna of Sweden. Reintroduction has been proposed in several different forums. Reintroduction is an attempt to reestablish a viable population of a species in an area to which it is native. To make such an operation successful in the long run it is essential to know the attitudes of the stakeholders involved. This study has sensed the attitudes towards reintroduction of European bison to Sweden.

The purpose of the project has been to work out recommendations that reduce the energy-related costs and environmental impact of HPW Fresh & Dry Ltd., a fruit drying factory in Ghana. The factory produces electricity with diesel and biogas but also purchases electricity from the national electricity company. Heat for the drying process is produced from biogas, kerosene and solar panels. In the project the energy system was analyzed by measuring production and consumption of heat and electricity. The project results show that the factory can become self-sufficient on heat if the available energy is used more efficient. The production units for both electricity and heat have low efficiencies.

This project is made to see at which time at the year it?s best to sell an apartment inside the tolls in Stockholm city. The two types of apartments that are compared are one room and four rooms.The comparison is made at the request of Valuegard since they were interested in the result and it?s considered as a interesting comparison.This comparison can be extended to other amounts of rooms in an apartment. But in this project, only two types will be represented.The result can be used both for those who wants to sell and buy an apartment.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

The purpose of this thesis project is to develop a set of interactive digital solutions designed to enhance the interest and knowledge intake of visitors at Skånes Djurpark (Zoo of Scania) in Höör. The project was carried out in collaboration with Skånes Djurpark and representatives from its visitors. Our thesis is based on academic works in the fields of interaction design, exhibit design and contextual learning. Ethnographical field studies have been conducted at Skånes Djurpark with additional field studies at Tropikariet in Helsingborg, Copenhagen Zoo and Regionmuseet Kristianstad. Existing information signs in Skånes Djurpark are primarily image- and textbased, forcing visitors to divert their attention from the different species of Nordic animals that inhabit the zoological park.

Participation, public art and participatory public art as phenomenons and subjects have been studied and discussed. With interviews and observations as a base, we have studied projects and discussed participation, effect and quality in relation to these. Furthermore we have looked at how the participatory art processes work in Sweden and England. This essay seeks to discuss the process of participatory public art and to emphasize the elements contributing to the quality of this process. It is up to us as planners to recognize the possibilities for a qualitative place. To mediate between different interests, for example between politicians and stakeholders, between economics and quality, between the place and its users, between individuals and the community, and in our case between artists, users and the municipality. Public art has gone from being about the product, an art piece, to becoming more of a process, from non interactive to interactive. Participation ranges from receiving information to play an active part in the process. Four cases have been studied, taken both from Sweden and England, showing the diversity of processes connected to Participatory Public Art. From interviews conducted in Sweden and England information and thoughts have been received and they show a higher degree of use of participatory public art in England, and also a higher consciousness.

The project deals with the evaluation and testing of speaker and microphone elements as well as microphone cavity.The first part of the report comprises a comprehensive theoretical part about drivers, microphone elements, and to some extent microphone cavity.The goal was to , on the behalf of the company Limes Audio AB, develop proposals on microphone element and cavity as well as drivers for a speakerphone application, based on specific factors. The main factors were performance, price and form factor.The aim was to create the best possible conditions for Limes Audio's software developers to implement the company's audio-enhancing software, mainly adaptive echo cancellation.The testing was carried out using Adobe Audition and MatLab. The test methods were developed in conjunction with Limes Audio and are described below.The project will result in suggestions for a speaker, a microphone and a cavity. The cavity were removed from the product because the results indicated that the cavity matter little for the end result.The report concludes with a discussion on how the measurements could have been enhanced to simplify the interpretation of the results and making the testing more efficient..

This project has revolved around finding better ways of overseeing vibrations of the gearbox at a wind power station. The gearbox has been a huge problem at the stations located at Gässlingen and the sooner the warning of an incoming breakdown is at hand the more money you can save from preparations. The work has been carried out together with Askalon AB in cooperation with consults from ÅF. Askalon is a company with a department focused on overseeing vibrations and it is in collaboration with that department the work has been carried out. During this work, new positions for the sensors and new methods of gathering and analyzing data have been worked out. This was then implemented at a wind power station to be tried out on site.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

The majority of the Swedish population were self-provided within agriculture a hundred years ago. Times do change and today the situation is the other way around - most of us live within city boundaries and only few work with farming and related agricultural businesses. One thing that has not changed though, is the need of supplies from Swedish agriculture.What do we think of those products? Are we even aware of the connection between us and agriculture? The Federation of Swedish Farmers, LRF (Lantbrukarnas riksförbund), started their project to strengthen the link between consumers and producers in 2008.This paper is part of the project and its aim is to investigate consumers' views and values upon the effects and products from Swedish agriculture.Opinions and values have been studied through interviews influenced by phenomenology. The results show that the informants in general had a positive approach and thinking concerning the products and effects from Swedish agriculture.

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

The reason for, and objective of, this project has been to research the relation between abstract and figurative illustration and how, if at all possible, one can bring them together and make them act as a whole.As a starting point for this project I used fragments from texts I?ve written during the past years. The texts deal with the thoughts and emotions that describe the state of melancholy or mania, two psychological conditions that are widely spread in our society. By illustrating these text passages in pencil drawings I?ve been given the possibility to investigate how to combine figurative illustration with the abstract alike.