The thesis work of 15 credits has been performed to interest of Norrtälje ElektronikPartner AB (NEP) in Norrtälje. The aim of the thesis was to develop a prototype for an integrated digital multimeter, designed for one of NEP's proprietary test systems. A digital multimeter module according to NEP's requirement specification, such as physical size and accuracy should be constructed. The module should be able to measure current, voltage and resistance.The final circuit was based on the chosen analog to digital-converter, Maxim integrated´s Max134, which is the main component of the circuit for this instrument. A circuit diagram and PCB layout were made. The result of this project is a constructed DMM board.

Shear Strength and Deformation Characteristics of Uppsala Clay with CRS and Standard OedometerTyra Morell Bonin & Magdalena MählerTo see how much a clay compact under different pressure one can use several different methods and in this project, two methods were used, the Standard Oedometer and a CRS apparatus. A Standard Oedometer is a full-time manual device and the CRS apparatus is a modern electric and automatic device. The aim of the project was to see similarities and differences between the two methods and examine which method that were most reliable. This has been done with repeated laboratory tests and afterward evaluations. With this information one can get a picture of how the clay will behave and how it will deform in nature.

Hedemyr?s project has been about finding a meaningful position of utterance and a language for her practice. The general theme is performative art in public spaces.This text is a meta-narrative about this development and transformation process. It is also a proposal for choreographic practice as text, and thus a suggestion for what performative text could be.Her master project includes three intertwined parts. The foundation is an ongoing ?doing?.

The governing set of regulations for structural engineering in Sweden used to be Boverket, BKR. However in the beginning of the 21st century a changeover to new regulations, the Eurocodes, started.The transition was completed in year 2011 when the Eurocodes became the mandatory design work policy for all countries within the European Union. The Eurocodes were implemented to simplify and remove potential barriers to trade that may exist when countries have different design rules.  Since the changeover it has been important for all construction companies to update their knowledge base and their design software.When comparing the two calculation processes they seem similar, but there are a couple of differences worth noting.  With the new regulations, engineers will find that the process when designing joints in timber structures has changed.  What used to be a fairly easy and straight forward calculation procedure has now become tedious and time consuming.The objective of this degree project is to present a product, a dimensioning tool that will help structural engineers when computing lateral load carrying joints in timber structures.The degree project is made up of two parts where the first part is the written report describing the background and theory behind load carrying computations. The second part of the project is the actual dimensioning tool which includes several worksheets in Microsoft Excel. The program treats single and double shear connections of the following:Nail jointsScrew jointsSteel plates (thick and thin types) The user can edit the following parameters:Type of plate/ number of shearsStrength class of timber membersMember and plate sizeType of fastenerDiameter of fastenerLength of fastenerYield moment of fastenerkmod and partial factors for design load carrying capacityThe dimensioning tool was created and developed in collaboration with structural engineers at the company Byggteknik AB.

A prefabricated timber frame house previously built by Villafabriken AB has been modeled in Autodesk Revit Architectural, a 3D-program based on BIM-technology. This has been done tosee if it?s possible to produce the publications that Villafabriken demands from the designengineer?s work, and examine which possible extra values that may arise compared to traditional 2D-CAD drawing.BIM is short for Building Information Modeling. Everything is stored in a single database and a change in the project file is automatically updated across the project. BIM provides more than just drawings since information from the model can be retrieved in various ways such as lists and quantity schedules.It was possible to produce the publications that Villafabriken demanded using Revit, but BIM doesn?t only mean a new way of drawing, it also require a change in the company?s process were the information from the model is being used..

Thesis completed by Johan Arvidsson, Alex Rasooli and Pontus Winroth, students at master program Product development and Design at the School of Engineering in Jönköping Sweden. The project comprises 30 ECTS credits and was carried out during the semester in the autumn of 2007.It was carried out in cooperation with Eksjöverken AB, subcontractor within the truck industry with special knowledge within the area of complicated machinery construction work. Job initiators at Eksjöverken were Mats Svanberg and Kjell Nygard. Dag Holmgren was acting as a tutor from the university. The task was to develop tools for trucks, primary toolboxes but in case of time also under run protection.

The study deals with the causes of unjustified differences in pay between women and men in the banking sector. The purpose of this paper has been to examine how a gender project implemented in the private banking organizations from a gender-and implementation perspective. The aim of the project examined is to even unjustified differences in pay between men and women in the banking and finance sector. The main issues are: ? How has the project been implemented and what are the real and perceived results? ? How can the opportunities and barriers to successful implementation course with emphasis on gender? The method used is a qualitative study, where the empirical material consisted of focus group interviews.

The initiative for this project was taken by Benteler Engineering Services, as a result of having identified areas of improvement, in designated accessible areas like the wheelchair spot onboard buses. Depending on a wheelchair to be able to move around can understandably be challenging.Public transport is a common good in today`s society, however despite the measures taken towards adjusting to accessible needs, the majority of those being disabled chose different alternatives of transportation. This is due to reasons such as the drivers' poor attitude, furthermore the limitations of the space allocated to accessible needs, as people with strollers also use these spots onboard. Also, some wheelchair users find the rides unsafe, as they could easily fall over during without the appropriate space for them onboard the buses etc. These are only a few reasons why other options are sought out, i.e.

In the growing concern for the state of the environment more tools are being integrated in the decision-making processes. Sweden actively makes use of environmental impact assessment (EIA), which is supposed to minimise negative impacts of a project, policy or plans on the environment. The EIA process in Sweden still requires certain improvements to be more efficient. In this study actor interaction was analysed with trust being the framework for analysis. The aim is to find out whether it is possible to use trust as a framework for analysis since trust research is very discipline dependent.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

This degree project was made in cooperation with AssiDomän Frövi and Charlotte Andersson and the main objectivehas been to create to ice cream pacbges from 250 gsm Frövi Light board. The paekages are intended to be easilyresealable while decreasing in size together with the ice cream. The project also describes the food packaging labelsand symbols currently present in the European common market.Both capsules utilize a separate lid for resealing. One of the paekages (Capsuie A) is indended to be cut along withthe ice cream and thereby decrease in size. The other one (Capsuie B) uses a series of flaps for contracting and expandingwhich enab1es adjusting of the size without cutting the package up.The design for Capsuie A is created both as a series of flavours with a super-hero theme intended for children andwith a colfee flavour for a maturer audience.

Electromyography (EMG) is a technique that measures muscle activity, whichmeans detecting the electrical signals that travel through the muscle in connectionwith muscle contraction. This project deals with how EMG can be used tocontrol a computer game.The project is centered around the game 'EMG Track Game' which has beenconstructed as part of this work. 'EMG Track Game' is controlled by twoelectrodes fastened on the player. These are attached to two selected musclesand control the motion in one direction each, one up and the other one down.The game is constructed in the purpose of being used in several elds of application.Among these are as entertainment, training equipment and a tool inresearch related to EMG and muscles.To highlight a possible application a study concerning muscle control has beenconducted. It answers the question of whether players score better with theirdominant arm in comparison with their non-dominant one.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

This report was an outcome of a cooperation between ?The Visitor and Knowledge Project Carl von Linné? and SLU, the Swedish University of Agricultural Science. The aim with the cooperation was to create a garden and to suggest suitable plants for an orangery already built. All species suggested should have a documented relationship with Carl von Linné. The project is located in the southern part of Sweden at an estate named Möckelsnäs not far away from Linné?s birthplace.