This project was intended to develop and improve my skills as an artist/designer. I have used inspirational sources and followedmy artist?s intuition to create something that is individual and a reflection of myself.My goal was to design 7-10 compositions and apply them to t-shirts and then create a photo arrangement with these t-shirts to make a strong artistic presentation.I chose to apply my images to t-shirts, because I feel that the tshirt is a perfect median to display pieces of art. My process has been very non-linear in nature. Trial and error,experimentation and my gut feeling have strongly influenced the progression of my design process and guided me to new ideas.I feel that with this project I have succeeded in fulfilling my goals to develop and improve my skills as an artist/designer..

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The project ?Investment proposal for grinding station for service work of screw feeders? has been performed during the spring semester 2014 for the course Bachelor?s thesis for degree of  Bachelor of science in machine engineering at Karlstad?s University. The project has been performed in cooperation with Fiber Workshop which is a service department in the company Valmet AB. Valmet AB is a company that develops and manufacture soft paper tissue machines. The screw feeder is a part that is used to feed, and squeeze out the water out of woodchips.

The report describes the thesis I, Philip Bergstrom, have done at the University of Gotland. The work comprises 15 credits and is at bachelor level and has been done in collaboration with Lyktan Bankeryd Belysning.The project consists of developing the design of a kitchen lamp for the Swedish home following the catchwords stripped French bistro that will fit into the Lyktan Bankeryd lighting spring collection 2013, and it should not look too alike any existing lamp on the market today.The work includes analysis of the company's current products and the image the company wants to project, analysis of three other companies' products to draw inspiration from, and a simple ergonomic study of the lights in the kitchen.The final result achieves the demands made and fits well in the intended environment, there is also the possibility for further development of both a floor lamp and a wall lamp..

This report deals with an exam report written by Olle Hjalmarsson and Thomas Likar, students at Högskolan i Halmstad. The project was carried out for Haldex Traction AB in Landskrona whose business consist of manufacturing automatic all wheel drive systems (AWD-system). These systems consist of a plate clutch which activates all four wheels of a 4-wheel driven vehicle. An important component in these clutches is the accumulator which basically consists of a piston under the load of a spring which creates an oil pressure with the help of an electric motor used for actuating the clutch.At Haldex difficulties has been experienced regarding the assembly of the accumulator parts due to the small tolerances between the piston and the hole of the accumulator in the cast aluminium housing. Attempts have been made to assemble the parts in existing robot cells.

The purpose with this project was to invent a product that secures buildings sewersystems against rats. The problem was presented to us by a local building maintainer inHalmstad, who had experienced big problems with rats in his real estate. The project hasbeen carried out by Per Johansson, Robert Lidén and Niclas Nilsson under our ownauspices. We are primarily sponsored by AMLI Business Partner but also byInnvationsgruppen, Halmstad Fastighets AB and Anticimex.To be able to secure a whole building with only one product we came to the conclusionthat the product must be placed in the horizontal sewer pipe that connects with themunicipal sewer system. Our goal was to invent a product that prevent rats from passingand at the same time not affect the water flow.

The earmould acoustics affect the amplification that the hearing aid is programmed to give to its user. It is therefore important that the choices made for the earmould are correctly done. One choice is regarding the shape of the soundbore that affects the frequency response of the hearing aid above a certain cut-off frequency. The purpose of this project was to measure the frequency response when altering the shape of the soundbore in the earmould. Additionally, the aim was to examine how the frequency response is affected when the shape of the soundbore is not set or is not possible to set in the software when programming the hearing aid.

In most software engineering project, users are only involved in the beginning of the project as a help to design the requirements specification but users can be involved after this phase too, but is it effective to do so? With this report we would like to investigate how effective it is to involve users after the requirements specification has been written and approved. To find out how effective it is to involve the users we try some fast and simple involvement techniques on a quite far gone project. These techniques include ethnographic studies, prototypes and surveys. We also interviewed a couple of people who work with usability and finally delivered a report with our results to them to find out if they found our result relevant. By also documenting how much time we spent involving users we will show to which degree user involvement is effective. We found out that a couple of fast techniques could get very much result in the form of usability enhancing suggestions to the developers.

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

The aim with this thesis is to examine how childrens librarians apprehend and use the nationally initiated reading project Bokjuryn as an instrument in their work. The main question is as follows: How does Bokjuryn work related to the way public libraries pass on literature? Two questions are asked: How does the childrens librarians use Bokjuryn as an instrument and how do they motivate their work with it? and How do the childrens librarians view the reading project Bokjuryn as a method of passing on literature? The study is based on qualitative interviews with five childrens librarians. As a theoretical starting-point Jofrid Karner Smidt´s work about mediation of literature has been used. A model has been created and used based on Louise Limbergs analyses of the differences between school libraries and public libraries to analyse the result of the interviews together with other literature.

A consultant is an external expert that exists within all types of organizations. The consulting service can be divided into individual practitioners and large companies whose sole task is to hire out consultants to clients. The need for consultants has grown due to the restructuring of Swedish businesses during the past decades. They have put parts of their business on contract. This has led to a market with other player that have been able to focus on these parts.

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

Introduction: The number of hearing impairments in Sweden is increasing. The largest increase is seen in ages 25-44. There are reasons to believe that these impairments are noise induced. Leisure time noise is not controlled in the same manner that industrial noise is. An ongoing conflict between city council officials and rock club owners, musicians and music event organizers about sound levels at smaller live music clubs exceeding the national sound level restrictions created the need for an acoustic intervention project.

AbstractThis report describes our ten week long thesis work which is the last task in our education in mechanical engineering at Linköpings University. The project has been performed at Siemens Industrial Turbomachinery AB?s service department. The company which is located in Finspång produces, sells and provides service for steam and gas turbines around the world.The purpose of this project is to help Siemens develop their maintenance programs for two of the auxiliary systems which are a part of the complete steam turbine system. These are lube and control oil systems.The project is restricted to two of Siemens maintenance products, No Stop Check (NSC) and the annual Safety Inspection (SI).

Lansen Technology develops and sells alarm systems. The communication between the system devices are wireless. The radio protocol used by the system is developed by Lansen with the purpose to be energy efficient. The alarm systems target groups are individuals, businesses and government agencies. The current system is installed, configured and controlled from a control panel for all audiences.