This report gives an overview of applications of the Greenroads rating system whichin turn is an environmental review system for roads. The focus of this report isapplications during the construction phase, ie on solutions which adhere to theentrepreneur's area of responsibility as opposed to the designer's. The study was undertaken in cooperation with Skanska (a global contractor andFortune 500 company) which provided a project suitable for an exemplatory study ofGreenroads. Please note that the project in particular was not specifically designedwith Greenroads in mind. Therefore and because of that the site provided anexcellent opportunity to study effects of application contra non-application. The approach of this study was to first review the system, thereafter to performinterviews with key personel at the site in different roles as to receive different viewsof selected points of application. Selected possibilities of application are cathegorizedand presented with comments and suggestions for adoption. Lastly Greenroads is briefly compared to the rating system which today is the mostwidely used by Skanska, LEED.

This is a qualitative study with a hermeneutic and partially inductive approach. The study?s purpose is to enhance the understanding of young adults experiences of unemployment and the importance of being employed. In this study, eight young adults participate in the project Framtid Kronoberg. The youths are 19-25 years of age.

This project is a collaboration with Ett Klick för Skogen, a foundation that buys and preserves endangered forests in Sweden. There are several ways of helping the foundation, e.g. buy a tree and for this the buyer obtains a symbolic diploma. Many organisations uses this method to collect money and for me the lack of a thorough expressions are consistent. The objective with this project has been to renew these diplomas for Ett Klick för Skogen and in the long run increase the collections and preservation of endangered forests in Sweden.The idea has been to vivify hardwood trees in a new and rather poetic than pedagogic manner.

?Development of methods for the planning and implementation of ditch clearing with modern methods?, is a long title for an exam work but that is what this report describes. In Sweden, we have a limited area available, and with the present development with increasing market oil prices, and enormous forces on the renewable energy sources, we need every hectare possible to protect the output of the forests. So with this in mind, many people are now considering how to increase the production of the forests that are already available. A part of production increases is to manage the existing forests, and not to allow this area to go to cultivation or become marshland. We manage our forests in a way that benefits the environment, and we consider that our working practice over the years has shown us to be correct and well functioning. A part of our way of producing forests is to ensure that we have functioning drainage systems in the forest holdings which we administer. The responsible at Holmen Skog requested a good method to make inventories of the drainage systems of Holmen forests. This Degree Project is about ways to identify and implement drainage systems with modern methods. It deals with authorities regulations, and how they operate in different counties.

The company System Andersson is developing systems for controlling materials and production in industries. They want to add a new service, where parts of those systems are accessible through cell phones.In this paper we are investigating which technology are best suited for this kind of application. And then we describe how we are developing a prototype fort this application, based upon that technology. After investigating technologies such as Java ME, Microsoft Silverlight, and web applications we settled upon building the system as a web application, customized for a mobile environment.To build a web page which is readable by many different cell phones we use the markup-languages which are developed for cell phones. We put much effort in reading about the standards and recommendations for the mobile web, produced by the organizations W3C and OMA.

The aim of this study was to compare educational systems in Sweden, Czech Republic, Italy and Scotland. In the light of the Bologna Declaration signed in 1999, I was particularly interested in comparing social work educations in these four countries. Especially to clarify how far they have come to fulfill the goals of the common European educational policy.Central questions asked were: How do the educational systems look like in each of the four countries? How are the social work educations organized in each of them? In what ways do the social work educations differ? How can we explain such differences?Each country in this study represents a different welfare regime, and therefore I was challenged to find out if this has an impact on the implementation of the incentives of the Bologna Declaration. By studying various documents from the European Union, documents from each country and presentations of various social work programmes, I have come to the conclusion that the differences found mainly depends on the historical and socioeconomic traditions in the countries.

In most software engineering project, users are only involved in the beginning of the project as a help to design the requirements specification but users can be involved after this phase too, but is it effective to do so? With this report we would like to investigate how effective it is to involve users after the requirements specification has been written and approved. To find out how effective it is to involve the users we try some fast and simple involvement techniques on a quite far gone project. These techniques include ethnographic studies, prototypes and surveys. We also interviewed a couple of people who work with usability and finally delivered a report with our results to them to find out if they found our result relevant.

The aim of this dissertation is to examine why smaller municipalities[1] in Sweden experience difficulties when implementing the 16 environmental objectives that are designed to solve Sweden's environmental problems.The theoretical framework used for this dissertation is implementation theory which provides three conditions that need to be met in order to have a successful implementation.  These three conditions have shaped the research questions that examine if Torsby municipality has the "understanding," "ability" and "will" needed to implement the decision correctly.  The dissertation employs a case study method to examine why Torsby municipality has experienced difficulties implementating the target: programmes and strategies for planning, which is an interim target to environmental objective number 15: A good built environment.  Qualitative text analysis and interviews with politicians and civil servants from Torsby municipality and the county administration board of Värmland have been conducted in order to answer the research questions.   The material used for this dissertation is mostly from the government bills that are the foundation of the Swedish environmental policy and the documents and reports about the environmental objectives that the National Board of Housing, Building and Planning (Boverket), the Swedish Environmental protection agency (Naturvårdsverket), and the Environmental objectives council (Miljörådet) have released.The result of this dissertation supports previous research which has shown that smaller municipalities have problems implementating the environmental objectives due to a lack of financial resources. This dissertation also shows that the problems can be due to a lack of understanding the purpose of the objectives.  This leads to a lack of political will to implement the objectives.  Since the municipalities do not have the political will to implement the objectives the appropriate resources needed for a successful implementation are not appointed and therefore the municipalities are not able to fully implement the environmental objectives. [1] Municipalities with less than 20 000 inhabitants..

This degree project contains a theoretical and a practical part about magazine design. Literature aboutthe subject?s typography and magazine design has been studied and put into practice on the professionaljournal Ingenjören. Besides of that a study about the history of magazine typography for the lastfifty years has been done.Typography and other design factors are important for the magazine to be readable and gives at thesame time the magazine an identity of its own, which has become more and more important throughoutthe last decades.The result of this degree project is a new design for Ingenjören, a design that agrees more with howthe journal want to be considered. A new template, a dummy and a manual have been produced.

The aim with the project was to portray something to step on. Its purpose has been to experiment and explore the interaction between pattern, structure, material and colour for something to be applied on a floor. Focus has been on esthetic expression and not the creation of some¬thing for a specific environment or audience. My goal was also that this project would illustrate the importance of the floor to create a certain atmosphere in a room.The project was divided into three phases. The first one was the experimenting and exploring phase, where the goal was to find an expression.

This essay is a product of our examination work on candidate level in Interaction Design. The aim in this project was to design a digital wallet integrated into a cellular phone and make it as an electronic payment tool. In our project the goal has been to create a digital wallet not just for payment, but also develop it into a complete digital wallet, replacing visa, membership card, student cards, id card and receipt. Our ambition is to take care of current qualities of today's wallet and improve where it is possible so that can be replaceable with the digital wallet..

This is a case study of Carlstad Comic Con 2011 and 2012.The purpose is to study the event in relation to a project management and a local culture policy perspective. This in order to analyze the organization of a popular culture event and see how such a local event may benefit Karlstad as a city. Besides studying the organization of Carlstad Comic Con and its outcomes I am sketching a short cultural history of popular culture media and its context within recent year?s globalization.The study shows that the events have had a great beneficial impact on the local industry; lacking any negative sides, and have put Karlstad in an international context which goes directly in line with the standard guidelines for project management of region culture policy. Concerning how to organize the event the organizers have not followed a strict project structure.

This report is going to be focusing on the development of a promotion page and login system for the web production company Adoreyou. The promotion page and login will be parts of a new taxi application for iPhone that lets the customer book a taxi and drivers manage the requests from the customers.Taxi application?s that let customer?s book trips are nothing new but they are constantly being explored and developed. The most common practice is to let the customer fill in from what address he or she wants to be picked up and to where he or she wants to be taken. Then the price is set in the application depending on the distance and most likely other factors like weekday and time.

This report describes the work process to an interactive movie addressed to children with neurodevelopmental disabilities, where Jippieserien is the client. The aim is to explore how multimodal media can convey Jippieseriens message to children with neurodevelopmental disabilities and their parents, by taking the users needs into account.It is important to focus on the people who will use the system when designing interactive systems. This project is therefore using the designprocess human-centered design for interactive systems. The process includes four basic elements and provides guidelines for user-centered design. These parts are analysis, prototyping, implementation, and evaluation (Johansson.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.