The purpose of this dissertation is to describe small businesses? opinions about the auditor as a business adviser as well as their need for advice, dependent on which stage of the lifecycle model they belong to. This dissertation has a qualitative approach as the authors wanted to gain a deeper understanding about the problem area. As the lifecycle model in this dissertation consist of three stages, the authors have interviewed six small businesses, two in each stage. The interviews were conducted with the owner and took place at the location of the business.

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

HemoCue AB is a multinational corporation targeted on manufacturing point-of-care analysisinstruments for medical treatment. Their main product, the DM 201, is outdated and has bigissues gaining new market shares. For example, no medical treatment center in Sweden usesDM 201 frequently. The project of developing a new instrument to replace it was assignedtwo students at the development engineering program at Halmstad University. The projectalso included integration of the new platform for DM 202 to HemoCue AB:s remainingproducts.The project began by defining the different technical areas concerned.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.

This project was conducted during the spring semester 2013 at mechanical engineering program at University Halmstad. The project was conducted in collaboration with MPQ Consulting in Halmstad. MPQ Consulting is a newly established company looking to take step into the product development world. The company has already had ideas and existing products. One of the ideas is to construct and design a form of beach games whose rules are based on the volleyball rules.

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

More than half of the implemented IT-projects go over budget, deadline or simply fail. The processes in an IT-project requires technical competence to be present among the project participants to ensure the achievement of business goals and to make organisations competitive. The success of an IT-project largely depends on the project manager which makes it interesting to further investigate what impact the project manager?s technical competence has on the project. Previous research shows differing opinions whether technical competence is considered important for the project manager to be successful or not.

This report summarizes a Bachelor Degree Project in Integrated Product Development,carried out during the spring semester in 2007 by three students at the Product Design Engineering programme at the University of Skövde. The project was performed as an assignment for KinBag ab, a sister subsidiary to Kinnegrip ab in Lidköping, who develop,manufacture and market the golf bag KinBag, a bag with an integrated wheel carriage system. The purpose of the project was to redesign the golf bag to attract a target group consisting of golfers aged between 20 and 40.The layout of the project was as follows: The project began with a feasibility study where different problems were identified with the basis of a market research which eventually was summarized in a dynamic specification of requirements. The feasibility study was followed by a generation of ideas which contained everything from sketches to simple mock-ups with an intensive amount of thoughtful brainwork and information gathering in between. This ledto the development of a number of design concepts, both on an overall level and on different parts of the golf bag.

During the last year in the Innovation Engineering Program, at Halmstad University, a degree project was performed that was carried out during Fall semester in 2006 and Spring semester 2007. The project was performed by two students in corporation with LIC Audio AB, a company in Stockholm. The degree project was meant to result in a communication aid for people with a cognitive handicap. The project focused on people suffering from dementia because of the expressed need within this group. This aid should first and foremost help in a conversation between a person with dementia and another person, like a relative or nursing home staff.

The purpose of this paper is to standardize and simplify the design work on a few specific types of storage brackets for balconies. The company Balco AB had the wish to simplify the design work in the preparation of attachments to their balcony structures. This would be done by a calculation matrix that could be produced which then in turn could be used for each new project by the company. The design work behind the development of these fittings at each new project is costly both in terms of time devoted by each calculation but also the cost of the time. The purpose of this report is that in a systematic manner, a calculation matrix can be created that then the company instead may follow from each new project.In carrying out the project used HILTI calculation program, which was provided by the company HILTI.

Abstract The purpose of this project is to develop a modular processor card which is intended to work as a platform for Kitron Development Karlskoga. The modular processor card is meant to be used as a control system in development projects, mainly in medical and industrial products. The processor card will consist of a central unit with the basic functions for a control system. Furthermore there will be complete modules with machine commodity and programming, to pick exactly the necessary functions for a specific application. With consideration to the specification of the development and the main unit, I chose an adequate microprocessor (AT90CAN32) as core and interface circuits to stated border areas. The construction is first completed in the program MultiSim and then remade in the program OrCAD Capture. The programming language C was used in the software model.

The purpose of this essay is to examine if the municipality has a real freedom of action to control the use of the land and the shaping of the buildings in a large and prestigious building project.In Karlstad there is now (2006) a large building project in form of a shopping mall. This project is in its final stage of completion and offers me a suitable case to examine. To undertake the purpose of the essay, the following research question is formulated:Do the municipality have a real freedom of action to control the use of the land and the shaping of the buildings in a large and prestigious building project as the Mitt I City project?In an attempt to examine the project and the planning process, three themes are applied. The first theme derives from the hypothesis that the part that initiate the process gets the upper hand as future discussions are taking place in relation to the original ideas.

During the spring semester 2012 Robin Westlund has accomplished ?Controlled interaction for more creative meetings - Summit Flexiwall? with the individual focus on social communication based on visual interaction in future office. The project was a part of the course Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which includes 22,5 ECTS Credits. The course is a part in the program Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.Assigner of the project was Moelven Eurowand AB with their head office in Örebro. The company manufactures and assembles entire room solutions for offices.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.

  ABSTRACTThere is a limited possibility for many of the concert-goers to go behind the stage and follow the work process with putting together a program for the concert season in a concert institution. The purpose of this study is to describe a concert institution's work with developing a concert program for each season. This is done through a presentation of the factors affecting the work. This is a descriptive essay and a case study of the Malmö Symphony Orchestra. Interviews have been made with people directly involved in the work or affected by the outcome of the work process.