This is a result of a diploma work in construction engineering. The purpose of this thesis is to investigate the nature of the Productivity in a given project and how the Skanska Productivity tools were used in this project.Interviews were held among workers and management to get some answers on what affected the work and its Productivity. The result of the thesis showed that the Productivity tools as propulsion analysis and ?goal cards?, were not used to a wide extent in this project. Furthermore there was almost no feedback for the one who made the calculation and the offer for the project, which might affect the results on projects negatively in the future.Within the project there was a lot of waiting time which affected the Productivity.

The purpose of this study is from a case study develop a model that aims to cost effectively improve Productivity in a manufacturing production process. The study highlights the importance of having knowledge about customer needs and using a holistic process perspective when improving Productivity to identify the relations between the process stations and by this find problems that cause waste and losses in Productivity. Tools and methods used to make production more efficient such as single minute exchange of die, spaghetti diagram, 5s and master production schedule is presented an applied in the model to see how these effect costs, Productivity etc.Maintenance effects on quality and Productivity in a manufacturing company will as well be covered in this thesis. The results and conclusions finally reveals how the process improvement tools, maintenance and production planning for example effects each other and why it is important to establish an attitude in the company where continuous process improvement should be emphasized..

The main purpose of this study is to investigate the Productivity effects of multiple tree handling in thinnings. Other important elements have been to investigate in which extent multi-tree handling is used in stands with different stem volumes and the impact of collecting partially delimbed fuelwood assortments has on harvesting performance. The study is based on data from thinnings in Sydved and contractors' operating activities. Collection and compilation of operating schedules, number of stems and surveyed volumes from several contractors and a large number of executed orders underlying the results. Multiple tree handling is used to a much greater extent at lower average stem volumes. Prediction models for Productivity of the multiple-tree handling harvesters in the study differ from the Productivity models for single-tree handling. In the model developed in this study Productivity is not as dependent of stem volume as reference models.

Although Lean has received an increased amount of attention in the service context, research still has not established how successfully Lean manages to increase service Productivity; since service Productivity consists of both efficiency and quality. Research regarding Productivity discusses the risk of a tradeoff between efficiency and quality in service production processes. Therefore, this thesis aims to explore if the tradeoff in a production setting with low variability in demand and low customer participation exists, after Lean has been implemented. With a qualitative approach, a case study has been conducted at Scandinavian Airlines Ground Handling to evaluate the effects of Lean in the baggage handling process. The result of the study shows that the tradeoff has not been overcome; efficiency has increased at the expense of quality.

Profit in first commercial thinnings of today is hard to achieve. This is because of prevailing pulpwood prices and because of high costs of logging and transport. To reduce these costs higher Productivity is advocated. One way to increase the Productivity is the use of multi-tree handling harvester heads. The aim of this study was to calculate logging and transport costs in first thinnings, where multi-tree handling has been used.

The cost of construction projects have increased during the past few years. Different actors in the construction industry work together to advocate various measures to mitigate these cost increases. One of these measures is to try to improve the efficiency in the phase of production. By striving for a kind of standardization with a constant quest for improvement, the Productivity can increase while the costs of production fall.For this thesis has a case study been conducted at the construction company JM AB which is seeking this. They call the approach structured production and have implemented various measures to achieve a more productive output.Based on information from reconciliations, the cost and the spent hours of craftsmen have been analyzed at the company where the case study took place.

The past and ongoing structural change in Swedish agriculture has led to an increasing number of large-scale farms. The biological factors associated with large-scale farming operations may cause increasing variability, risk and reduced yields due to sub-optimal timing and management of field operations. The theory of economies of scale suggests that largescale production may benefit from lower costs due to scale efficiencies. Thus, large-scale farms may face cost reductions in terms of long term inputs factors, e.g. agricultural machinery.

This exam report contains studies about how the weather affects the construction site from a planning and Productivity perspective. In 1960?s the contractors started to build during the winter, since then the demands to obtain a good construction has been higher on both the contractor and then promoter.In this report you will see how the different actors at the construction site handle the weather problems. By several interviews of the actors at the construction site there have been opinions about the weather situation which has been collected. To get a wide perspective of the problem, field studies from four different construction sites been made.Weather statistics over Halmstad is a mayor part of this report.

This thesis reports on the methodology and results of a study with one retailers 73 units to investigate factors of the store managers leadership that influence Productivity performance in store. The study determine the impact of ten independent variables in terms of the store managers leadership on four performance measures: (3) three Productivity measures: Sales Over Labor (SALOL), Sales Over Inventory (SALOI) and Sales Over Square-metre (SALOS) and (1) one profit measure: Contribution Income Over Square-metre (CIOS). The result shows that the leadership factors give no more explanation to the economic results after factors of local market condition and the store attributes are taking in to account. The store manager's leadership can though influence his or her decision-making in-store. The store manager's decision to staff the store more intense (higher service-intensity) can increase the level of contribution income over square metre in-store..

In Sweden, harvesting pre-commercial thinning (PCT) stems for energy purposes is a interesting way of financing the high cost of preparing dense stands for a profitable first conventional thinning. This concept can be labelled bioenergy thinning. The aim of this study was to quantify the Productivity of a Vimek 404R light harvester with an accumulating Naarva-Grip cutting head during the bioenergy thinning of a self-regenerated stand west of Sunnansjö in Dalarna. The stand was birch-dominated, contained 15 371 stems/ha, and measured on average 4,6 cm Dbh and 7 m tall. Even though the driver was well experienced with the machine, the stand in question was the first one that he ever thinned in this manner. Nevertheless, the driver strived to accumulate as many stems as possible during each crane cycle and chose to cut taller stems in half so as to make the handling and forwarding of the harvested stems easier.

The aim of this study was to quantify the Productivity and the costs of different harvesting systems (teams), containing harvesters equipped with accumulating harvester heads and forwarders, in first commercial thinnings were an integrated harvest of pulpwood and energy wood were performed. In the beginning the plan was to study and measure 20 sites before and after harvest. Due to storms during the summer of 2010, complete data could only be obtained from 8 of these 20 sites. Seven of these sites were privately owned and one was owned by UPM, all of the sites had been pre-commercially thinned. The mean stem density before harvest was 2578 stems per ha and the mean stem volume was 0.074 m3solid over bark.On average 1518 stems/ha was harvested.

During the last couple of years many sectors and markets have had an increase in the competitive situation, this has meant that being cost effective have become more essential if organizations want to stay in business and be competitive. Thus, one crucial issue has become how to utilize the resources already available within the organization. Organizations can thoroughly plan and control personnel resources in order to become more efficient. But to become more cost effective also means taking into consideration several key figures, Productivity being one of the more important figures.Onninen, a wholesaler which has one of its two central warehouses in Örebro has experienced this issue, i.e. an increase in competitive situation in their market.

The annual demands for forest fuels increases in Sweden. At present, large unutilized biomass resources is found in young, dense forests from which about five million oven-dry tonnes (ODt) (23 TWh) could annually be extracted as forest fuel. But harvesting small trees give high logging costs and new cost-efficient harvesting techniques are therefore required. The aim was to study the Productivity of Vimek 608 BioCombi in forest fuel thinning of Lodgepole pine and to calculate the economy of the harvesting and estimate the thinning quality. The time study was performed in Åmarken in the county of Västerbotten.

The public administration and its officials have a number of values which they have to relate to in their work. The values are a set of democratic and economic values.This study?s purpose is to examine how the officials at the National Insurance Office in Sweden give priority to these values. The study is performed by interviews with officials at two insurance offices.The study shows that the officials in a high degree value the democratic values legal security and public ethics. In turn they experience that Productivity, which is an economic value, is being promoted in a high degree from the management.

Ellos was founded in 1947 by Olle Blomqvist and quickly grew into one of the leading mailorder businesses in Sweden. Ellos Group is in the current situation Scandinavia?s largest ecommercecompany and since 1997 owned by the French holding company Keering. Thismeant that Ellos became a part of Redcats Nordic along with brands such as La Redoute,Verbaudet , Daxon and others.2010 started a project with the aim to develop a logistic model for these products. The resultwas the department Redmap on Ellos that would serve as both a hub and distribution channelfor Northern Europe.