Ellos was founded in 1947 by Olle Blomqvist and quickly grew into one of the leading mailorder businesses in Sweden. Ellos Group is in the current situation Scandinavia?s largest ecommercecompany and since 1997 owned by the French holding company Keering. Thismeant that Ellos became a part of Redcats Nordic along with brands such as La Redoute,Verbaudet , Daxon and others.2010 started a project with the aim to develop a logistic model for these products. The resultwas the department Redmap on Ellos that would serve as both a hub and distribution channelfor Northern Europe.

Productivity of Norway spruce (Picea abies) and Scots pine (Pinus sylvestris) was studied on 12 sites in coastal areas of northern Sweden. On each site, sample plots were placed in adjacent Norway spruce and Scots pine stands with similar ages in between. Basal area, tree height, Site Index, volume production, simulated maximum mean annual increment (MAImax) and tree vitality were compared for the two species. Average basal area at the time of measurement was 30.4% larger for Scots pine stands than for Norway spruce stands. The difference between the two species in basal area increment during the last 10 years was related to stand age.

The Swedish parliament has decided that Sweden should increase its usage of renewable fuel sources to a level of 50% of the total energy consumption in Sweden by the year 2020. One way to reach that goal may be to increase the usage of stumps as a bio-fuel. In Sweden stump harvesting is possible on about 5-10% of the total harvested area and thus contribute with 1,3 - 2,6 TWh per year. An increase stump harvest doesn't come without its drawbacks for the environment. When harvesting stumps a tracked excavator is used to pry the stumps from the ground and then cut the stumps into smaller pieces.

The development of Productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased Productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

Earlier investigations showed that damages on timber from feeding rolls could be within the lower classes of damage according to VMRs classes. Knowledge about differences in Productivity between kind types and aggressive types of feeding rolls is necessary because it should influence the question about damages on timber caused by different feeding rolls. In this study the production and timber damage in a harvesting head were evaluated at three levels of pressure (8, 10 and 14 MPa) on the feeding rolls, and with three different types of rolls. One type, the rubber cushioned steel plate roller had 10 mm studs and rubber damping, one ?middle? type made of solid steel with 14 mm studs, and one aggressive type, also made of solid steel with 18 mm studs.

The development of Productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased Productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

With an increased demand for biomass based energy and with development of better technique harvest biomass, new possibilities open up. With the possibility to combine traditional cleaning of road?s right of way with biomass harvesting, the work of suppressing tree vegetation could become profitable or at least decrease the road maintenance cost. However, knowledge about Productivity and profitability in mechanical biomass harvesting in roads? right of ways are still limited.

This thesis has been done in collaboration with Peab Stockholm Building 3, which is a region within the Peab Sverige AB. The report is based on a survey and studies of Peab business management systems and production literature. For general information gathering has literature from well-known sources collected in libraries and through the Internet. It shows through the work that Peab has routines for experience feedback in the construction process, but that these procedures work in a small scale and the practical work experience feedback does not work at all. This is also something the construction industry in general also perceived as problematic. The questions in the report are of a wide scale and concerns construction errors cost, how the employees perceive that the company takes advantage of the skills and the mental stress in production line. The goal is to find how Peab Stockholm Building 3 will work on the experience feedback to allow for better Productivity. In conclusion, the report author tries to demonstrate what can lead to increased Productivity and improved work experience..

Production requires the input of capital and labour. Hence, economic growth can be assumed to follow from increased levels of these two factors. Policies aimed at increasing production may consequently successfully be focused on facilitating the accumulation of capital and labour. However, even when an economy has managed to reach the same quantities of input factors as a more prosperous neighbour, the level of the production might still differ. The explanation of this lies in what economists refers to as expression embracing the characteristics of the input factors and the conditions in which they operate.In this thesis a calculation of total factor Productivity is carried out, using existing data on the Swedish FA-regions between 1990 and 2005 and the method the economist Robert Solow in the 1950?s.

studier visar en låg produktivitet jämfört med andra branscher men också komplexiteten av produktivitetsmätningar. Syftet med rapporten är att undersöka platschefens roll och vilka faktorer som påverkar förmågan att få ut produktiviteten på en byggarbetsplats. Fallstudien genomfördes på fyra av Peabs projekt och frågeställningen besvarades med hjälp av kvalitativa och kvantitativa metoder i form av intervjuer och enkätundersökningar. Vidare undersöks produktivitetspåverkande faktorer såsom kommunikation, motivation, kompetens och samarbete. Vid jämförelse används en incitamentkvot som ställs i relation till enkätundersökningarna och intervjuerna.Resultatet visar tydliga skillnader mellan platschefernas förmågor, arbetssätt och egenskaper som leder till en skillnad i produktivitet på arbetsplatserna.Slutsatsen visar vilka egenskaper och arbetssätt som tenderar i att ge en hög produktivitet..

This thesis has been done in collaboration with Peab Stockholm Building 3, which is a region within the Peab Sverige AB. The report is based on a survey and studies of Peab business management systems and production literature. For general information gathering has literature from well-known sources collected in libraries and through the Internet. It shows through the work that Peab has routines for experience feedback in the construction process, but that these procedures work in a small scale and the practical work experience feedback does not work at all. This is also something the construction industry in general also perceived as problematic. The questions in the report are of a wide scale and concerns construction errors cost, how the employees perceive that the company takes advantage of the skills and the mental stress in production line. The goal is to find how Peab Stockholm Building 3 will work on the experience feedback to allow for better Productivity. In conclusion, the report author tries to demonstrate what can lead to increased Productivity and improved work experience..

The report describes the process of identifying the interference that exists in a newly installed automated robotic cell and suggest improvements to increase Productivity. The cell is used for lifting up extruded aluminum sections onto a conveyor which deliver the material to a anodising line at a company that manufactures aluminum extrusions.To find the areas with the best possibility for improvements in the cell we used a variety of job measurements e.g. measure of standard times for each operation in the cell. The core of the report is a study of the robots.One reason for this study is that the robots do not reach the Productivity they were purchased to. The main cause not reaching the Productivity is the visionsystem.

If Swedish companies are to compete with companies in low-cost countries they have to achieve a more efficient production. The purpose of Total Productivity Maintenance (TPM) is to increase the company's profitability by increasing the Productivity. TPM is a method that involves all employees and aims to prevent failures in order to increase the availability of existing equipment.The aim of this paper is to evaluate the implementation process of TPM and give recommendations for the further implementation process. The conclusion and the analysis are based on a case study done at a production department at ABB Cewe-Controls facilities in Nyköping. The case study consists mainly of qualitative data from participation observations, surveys and interviews.Commitment of the management is a key factor in the implementation process of TPM.

Syftet med vår uppsats är att undersöka hur ledarstilar, organisationskultur och känsloarbete ömsesidigt påverkar varandra. För att uppnå vårt syfte togs följande frågeställningar fram: Vilka är respondenternas upplevda och förväntade ledarstilar?Vilken roll spelar organisationskultur och känsloarbete i förhållande till ledarstilar?Vi har genomfört en kvalitativ undersökning inom en offentlig organisation. Nio intervjuer genomfördes, varav åtta stycken med avdelningschefer samt en med en respondent från ledningen. Detta för att kunna se hur avdelningschefer uppfattar sin ledarstil och jämföra med vad ledningen anser.

This study has been made on behalf of the Swedish Transport Administration to study the work of the department National Projects. The Swedish construction industry has for many years been characterized by low Productivity. By being the largest purchaser of contracts in the industry the Swedish Transport Administration has a unique opportunity to influence the Productivity. In order to improve in Productivity The Swedish Transport Administration is adopting a new role in which they will order more turnkey projects. In our study, we will focus on how one department within the Swedish Transport Administration, National Projects, can perform successful turnkey projects.To clarify how the department National Projects can perform successful projects, this study identifies critical factors for projects and their links to different phases of the project.