The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

Gene technology has become more and more attractive in plant breeding during the last twenty years. This is probably because it can readily improve the existing commercial cultivars that have only one or a few drawbacks by modifying one or a few genes without changing the main genetic constitution. In this regard, gene technology is more effective than conventional breeding.The aim of this project was to analyze the fruit quality of the non-transgenic apple scion ?Jonagold? grafted on non-transgenic and rolB-transgenic apple rootstocks. The rootstocks used were M9-rolB1, M9-rolB2, M26-rolB and non-transgenic controls M9 and M26.

The main purpose of this study is to, in the educator?s point of view, try to find out how pre-schools approach science and technology along with Information and Communication Technology (ICT). The survey was conducted based on qualitative interviews where two preschools participated, a total of seven teachers were interviewed. One of the preschools only has access to a computer, and the other preschool is able to use both computer and tablets in their preschool activities. The results of this show that the teacher?s thoughts about ICT are positive and that they consider it as an important part of their work and have many areas where it is useful.

During the last years commercial Wind Power Turbines (WPT) has become larger regardingto the generator sizes and hub heights. Available hub heights around 100 meters is nowcommon, which has led to profitability for WPT located in forests where there normally are tolow wind speeds. The current knowledgement regarding turbulence and the variation in thewind profile for the outcome of the power production for the WPT in forests is limited.In this Master of Science thesis an investigation concerning forest located wind power plantshas been made. The purpose has been to investigate if plants located in forest perform lesscompared to wind power turbines located at more common locations.The analyses are based on statically material for determining the availability,production/generator size, production/hub height, production/swept area and how thetopography affect the production results.The analyses show that the variation in production result for WPT located in forest comparedto turbines located at other locations is small. The availability is high and the productionresults are good..

Summary The purpose of this research is to find out if technology is being used in pre-school activity, to what extent, in which way and what part the pre-school teachers believe they should have in the process. To gather information for the research, questionnaires were sent out to all pre-schools in a municipality in central Sweden. Based on that information two were chosen for observations and interviews. The work with technology in pre-schools may vary. Some pre-school teachers believe they do not adopt any technology at all when asked and all this because of their own lack of interest or knowledge, while others believe it is contained in all of their educational activities.

Title: Journalism 2.0: About the journalist's perspective on citizen participation and its influenceon the news content.Purpose: The aim with this study was to examine whether, and if so how, professional journalists experience that the production of news has changed as the media development has progressed and the citizens opportunities for active participation in this process has potentially expanded.Research questions:Does professional journalists experience that the opportunities for citizen participation in the news making-process has changed with the spread and accessibility of new media- if so, in what ways?Wheatear professional journalists experience that the relationship between themselves and their news sources has changes with the spread and accessibility of new media?What consequences can an empowerment from citizens have on the production of news and on the professional role of the journalist?Theory: This essay is based on theories about convergence, gatekeeping, agenda building, participatory journalism, news sources and the journalistic profession.Method: The survey is based on ten qualitative interviews with ten professional journalists, eight reporters and two web editors from the newspapers NWT and VF.Results: The results of this survey shows that the citizens? opportunities in influencing the production of news has partly changed. The journalists do not experience that citizen participation affects their professional role. Citizens have always had an impact on the production of news but new technology offers citizens and journalists new channels that facilitate the communication and interaction. The gatekeeping process is protecting the decision-making role of the journalist, which restrains citizen participation.

This essay is an enquiry about how companies as participated in a Lean pro¬duction education use this education. The essay describes also how one works with the implementation of Lean production and how they believe that they will work. The enquiry tries to create an advisory material for other companies that are in the beginning of implementing their own Lean production systems. There these companies? gets a picture of how other companies have done during their try to create a functioning Lean production system.

This paper consists of a comprehensive look at the advertising industry as a whole and communication mould various guises in the context of technology development. It also describes a production in the form of a commercial for a network of ten companies called The Lodge. The result is discussed based on questions on the subject communications and marketing. The discussions of this work will then be transferred to a proposal for further research..

This survey deals with textile production and how it was carried out during the late Iron Age,with main focus on a central place, Uppåkra. A comparison has been carried out betweenUppåkra and two agrarian settlements, Fosie and V. Karaby, from the nearby landscape toinvestigate whether any variation in production can be detected. The value of textiles has alsobeen investigated to determine whether a potential specialization in production may have ledto a surplus.An analytical and comparative method has been used with focus on the context of thematerial.The results show that the textile production vary at the different sites, and that a need fordifferent types of textiles has existed. At Uppåkra, the possibility to produce fine threads andtextiles existed as demonstated by the findings of small and lightweighted spindle whorls.This suggests that the production may have included both fine and coarse textiles.

Ocean Thermal Energy Conversion (OTEC) is a technology that utilizes the temperaturedifference in oceans between the warm surface water and the cold water at 1000 m depthto produce electricity. The purpose of this report is to investigate if OTEC with its synergiescould become a commercially feasible energy solution for a small island. A literature reviewis conducted to explore the different OTEC technologies and to what extent the threesynergies; fresh water, air conditioning and aquaculture, could be used. In order to calculatethe profitability of these synergies there is also a study conducted on the conventionalmethods and cost of fresh water production, aquaculture and air conditioning. A model is setup using a scenario of a small tropical Island with population of 100 000 people.

The purpose of this study is to explore how preschool teachers succeed in their mission to conduct work that will enhance children's interest and knowledge in technology. The study was conducted by qualitative semi-structured interviews among eight teachers at seven preschools in the same municipality. The method was chosen because I wanted to get as detailed and full answers as possible. I also wanted to find out their individual perceptions. The result shows that most of the teachers think that they have insufficient knowledge to practically work with technology. At the same time they?re expressing that technology is a broad area that sometimes is a little more complicated than it needs to be.

This study is done together with Sydved AB in the summer of 2012. The purpose of the study is to analyse how different quantity of assortments influence the production for forwarders and harvesters with multiple tree handling aggregate in thinning, by different tree volumes. To make this analyse a time study was performed where three entrepreneurs work has been analysed. Beside the analyse, of different quantity of assortments, has also been analysed how the tree volume and a forest fuel assortment effect the production. The result of this study shows that the quantities of assortments have a significant meaning for the production. The biggest differences are most distinct between one and three assortments in the smaller tree volumes where production goes down if the quantity of assortments increase.

Det här kandidatarbetet kommer framförallt att beröra filmtekniken, Matte Painting, men vi kommer även röra oss runt omkring ämnet och presentera andra delar från filmproduktionen och framförallt postproduktionen för att lättare kunna sätta Matte Painting i ett relevant sammanhang. Vi jämför Matte Painting med en teaterkuliss, en bakgrund som på nära håll eller ses från fel vinkel kan bryta illusionen av att det är en verklig miljö. Vi undersöker och presenterar hur man kan bygga upp en digitalt skapad Matte Painting som möjliggör att inte behöva åka land och rike runt efter den idealiska filmplatsen, utan kan spela in filmscenen i en studiomiljö. Vi analyserar existerande filmscener som har använt sig av Matte Painting, gör jämförelser mellan olika användningsområden för Matte Painting samt diskuterar fram en slutsats som besvarar vår frågeställning: ?Hur har utvecklingen av filmtekniken, Matte Painting, sett ut och hur kan man tillämpa en digital Matte Paint i postproduktion för att förstärka helhetsupplevelsen av en filmscen?? --- This thesis will primarily concern the film technique, Matte Painting, but we will also roam around the subject and introduce other elements of the film production, and above all post production for ease of putting Matte Painting in a relevant context. We compare Matte Painting with a theatrical backdrop, a background that closely or viewed from the wrong angle can break the illusion that it is a real world environment. We will investigate and present how to build a digitally created Matte Painting that enables not having to travel across the country for the ideal film location, but can shoot the scene in a studio environment. We analyze existing film scenes that have made use of Matte Painting, making comparisons between different uses for Matte painting and discuss a conclusion that answers our main question: "How has the evolution of the film technology, Matte Painting, looked like and how you can apply a digital matte paint in post production to enhance the overall experience of a movie scene?".

Background: The situation for Swedish agricultural production today is characterized by an increased competition, particularly after the country joined the European Union. Swedish agricultural production laws guarantee safe, high quality foodstuffs. However, due to these strict laws, Swedish farmers face higher production costs than their competitors. Meanwhile, cheaper imported goods compete freely on the Swedish market. Swedish agricultural production must find new ways to survive in the increasing competition.

The main purpose of this master thesis is to identify guidelines for a sustainable production that can provide useful information concerning the establishment of a biodiesel production. These guidelines concern the surrounding production environment, such as infrastructures and industries.The thesis is based on theoretical grounds surrounding industrial symbiosis, biodiesel production and how sustainable development should be designed. A study of an already established producer in a similar business area has been used to provide a picture of similar projects. The thesis has with the supervisor's consent focused on the production conditions that are affected by location.The production conditions selected are heating, raw material market, residual and sustainable profile. These are then evaluated through an Excel-based sensitivity analysis.