This report is a literature review that aims to describe marketing contexts for mango production in Kenya. The institutional conditions in the country are not well developed for marketing purposes, which causes many difficulties and problems for the society. In Kenya most mango producers are poor small-scale farmers with limited resources. Mango is a perishable commodity and to keep its value and quality it is essential to have the opportunity to sell the mangos in the right time. Inefficient and undeveloped infrastructure and marketing systems hinders the mangos to reach the market in time though, which causes large losses of produce.The Kenyan mango production has increased during the last decade but due to market losses for the producer, the small-scale farmers? profits have not improved.

Optimizing energy systems is, in Sweden, as in many other countries, of growing interest. District heating systems are no exception. In 2012, 285 out of 290 municipals in Sweden had district heating in use and the majority of these systems have a higher return temperature than that which is possible with an error-free substation of day current technology. To, when possible, lower the return temperature is a way of increasing the effectiveness of the district heating system.This study means to investigate, through simulations and calculations, how big of a reduction in production cost a lower temperature in the city of Ystad?s district heating system would correspond to.

The primary focus of this Master thesis is to study how industrial house building can be implemented during production of rental flats under the terms of public procurement. In order to determine a suitable working process as well as presenting a possible architectonic result of the process, a case study is carried through.A housing projekt is designed on a site i Malmö, where the commisioner is MKB Fastighets AB and the contractor is NCC Komponent with the industrial building system NCC Komplett. The focus of the design is to accomplish high quality apartments to a resonable price, as well as solving the overall scheme for the site.The housing projekt, Kv. Flaggskepparen, built on the consept of a single house model, used to handle the entire site, shows that the building system is well suited to accomodate the commisioners demands.In order to reach the best possible architectonic result with the building system, cooperation initiatded in an early stage of the process is neccesary.A model is proposed to handle the situation under the terms of public procurement. The model suggest that the geometrical design is mainly carried out after inquiry and that architectonic qualities should mainly be defined in a non geometrial way for inquiry..

?Development of methods for the planning and implementation of ditch clearing with modern methods?, is a long title for an exam work but that is what this report describes. In Sweden, we have a limited area available, and with the present development with increasing market oil prices, and enormous forces on the renewable energy sources, we need every hectare possible to protect the output of the forests. So with this in mind, many people are now considering how to increase the production of the forests that are already available. A part of production increases is to manage the existing forests, and not to allow this area to go to cultivation or become marshland. We manage our forests in a way that benefits the environment, and we consider that our working practice over the years has shown us to be correct and well functioning. A part of our way of producing forests is to ensure that we have functioning drainage systems in the forest holdings which we administer. The responsible at Holmen Skog requested a good method to make inventories of the drainage systems of Holmen forests. This Degree Project is about ways to identify and implement drainage systems with modern methods. It deals with authorities regulations, and how they operate in different counties.

This study deals with the technical and economic feasibility of replacing the nuclear power plant reactor Ringhals 3 with a biofuel power plant. A technical investigation has been executed to determine which of the systems and components that could be reused and which ones would need to be replaced. The investment costs of the reconstruction have also been estimated. The cost of the electricity production has been calculated as well as the emissions of the new biofuel power plant. Based on the established rate of return, the lowest average spot price of electricity that makes the investment profitable has been calculated.

Vattenfall hedge its future electricity production in order to decrease fluctuations in theresult. Hedging can in a simplified way be described as selling the future electricity deliveriesin long-term contracts so that the future price of the delivery becomes fixed. The contractsused are electricity forwards traded at the Nordic electricity market Nord Pool. Animbalance between buyers and sellers can lead to a situation where the forward price notequals the expected spot price. The difference between the forward price and the expectedspot price is referred to as the market risk premium.

During 2007 the City of Stockholm installed five grid connected photovoltaic systems. The aim of this master thesis is to quantify the amount of produced energy and recommend routines to collect and analyse production data, to make production data accessible by the public and to gain experience for future installations.The total amount of produced energy until March 2009 is 227 000 kWh, with an annual rate of 150 000 kWh. The expected annual rate was 148 000 kWh.All system owners are positive about their plants and see economical benefits in scaling up such systems.The installations need very little attendance and maintenance, however it is recommended that an alarm function is installed for automatic feedback in case of a system failure. All future systems should be inspected during full operation to determine if the actual capacity is matching the installed capacity..

A Swedish company, company F, will establish a new factory in China. Company F is adivision within Company F. The factory in China will manufacture wire products. Thepurpose of this final thesis is to analyse which legal and practical measures the company hasto undertake during the process of localization to get approval from the Chineseenvironmental legislation.An analysis of the influencing factors on the environment from the production in theconstruction in Sweden was carried through. A material-balance was analysed according tothe flowchart of the production.

This study presents a holistic view of which factors small and medium-sized enterprises (SMEs) have to consider, in moving their customer order decoupling point (CODP) further from the customer, thereby becoming more customized. The study also investigate whether SMEs and larger enterprises differ in the strategic questions relating to what influences an enterprise to become more customized, which prerequisites are required and which problems enterprises should anticipate and prepare for. These questions are important, given that strategic change is challenging, and can take considerable time to accomplish; it therefore needs to be based on the right decisions. This study is motivated by the fact that the markets SMEs are selling to tend to become more and more complex and harder to anticipate. Increased globalisation and use of IT and ICT have lead to greater uncertainty in customer demand.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

Worldwide consumption of cheese has increased over the years. The average Swede consumes somewhere around 20 kilograms of cheese per year, which is an increase of a 100 % over the past 50 years. One of the most popular kinds of cheese during the past decades is mozzarella, due to its? use as pizza cheese. Flavor and consistency differ between the traditional kind, made out of buffalo?s milk, and the industrially made kind, made out of cow?s milk.

This master thesis sets out to compare the different public transport modes in Stockholm city.Both energy consumption and air pollution are compared. The chosen transport methods are car,bus and metro.Traditionally the rail industry has had environmental arguments as a strong competitiveadvantage when it comes to passenger transportation. However, in recent years the automotiveindustry has been getting more positive media attention regarding environmental issues, forexample Roger Kemp?s statement that the car is the most environmental friendly passengertransportation mode in the UK. This study will show the environmental advantages of railwaytraffic in cities.The energy sources of the world are not endless and the use of the different sources affects theenvironment in different ways.

Research in solar energy is taking big steps in both solar heating and solar electricity. It´s not only the technologies alone, but also the combination of both solar electricity and solar heating which is what is called a solar hybrid. The idea of a solar hybrid is that a solar cells efficiency decrease with increased temperature and can with help from a solar collector be cooled and the heat can be utilized. This thesis report compares heat production and electricity production with respect of, in first hand, a solar hybrids geometry in the cooler. The theory chapter describes solar heating and how different solar cell technologies work and their environmental impact at the production and how compatible these technologies are for the solar hybrid.

Conqueror for Indigo is production treated with an active chemical to maximize the ink adhesion.ArjoWiggins has found that another chemical, the candidate compound, would improve the propertiesof the paper. ArjoWiggins therefore wish to replace the current compound. To strengthenthe patent requirements for ink adhesion needs to be determined. A theory is developed to whychemicals with certain properties maximize the ink adhesion. Experiments are performed but theresults are inaccurate.

In Sweden in January 2005, there is only one producer of organic broilers and none of organic turkeys. But there are, on the other hand, a few small-scale producers whose housing systems to some extent are similar to what is stipulated in the organic standards. The aims of this work are to investigate what housing systems are used by the Swedish small-scale producers of broilers and turkeys, what main challenges they are confronted with and if there is an interest and a possibility for a change-over to organic production. For the first part of this work a literature study was performed with the purpose of detecting the main health problems in conventional as well as smallscale production. A special focus was on coccidiosis and leg weakness as those were considered to be of particular importance. A study was made of Swedish small-scale poultry production units. In two groups of broilers from the same producer and in three flocks of turkeys the level of Eimeria oocysts in faeces and litter was investigated.