This study is about the use of textbooks in teaching English as a second language and about teachers? attitudes and opinions of using textbooks during lessons. The aim of the study is to receive a deeper understanding of the use of textbooks in English teaching and to learn about why teachers choose whether to use the textbook approach or not. The study contains an analysis of the textbooks the teachers in our study used. The analysis shows the actual content and the types of texts together with the design and the structure of the textbooks.

This study compare if there is any differences between Fairtrade certified and uncertified coffee producers in Aceh Tengah, Indonesia. The aim was to compare the way the two groups of farmers produces their coffee and see if there were any differences between them, income, post harvest, production etc. During a visit in the district of Aceh Tengah, producers from both groups were given a questionnaire with questions about their farm and their production. The results of the questionnaires showed that the certified producers felt they had benefits being a part of a certified cooperative. Even with the experienced benefits the certified cooperatives gave the connected producers, like agronomy consultation and workshops the uncertified producers had a higher income from the coffee per hectare. This study also indicated that introduction and presence of Fairtrade and the connection to the world market Fairtrade brings with it, has gained the entire area, for example with more stabile coffee prices..

The purpose of this masters thesis is to examine outlines of literary history for students at upper secondary school from a gender studies perspective. Earlier theoretical work concerning outlines of literary history is sparse. There are three dissertations, but none with an explicit gender perspective. The theoretical approach comes mainly from theories in literary historiography and gender research. Also discussed are the following concepts: canon, literary field and literary valuation.

Jag har studerat en liten torgbildning på Hisingen, Göteborg, i området Jättesten. Platsen är intressant då den har många besökare trots att den ligger vid sidan av de större stråken. Platsen har en del gestaltningsproblem och stora nivåskillnader, som gör den svår och otillgänglig. Intresset för torg och offentliga rum är större än någonsin och välgestaltade gemensamma platser har anlagts i nya bostadsområden såsom Norra Älvstranden i Göteborg, Hammarby sjöstad i Stockholm och Västra hamnen i Malmö. Men vad händer med förortstorgen från efterkrigstiden? Hur används 40-, 50- och 60-talets torg idag? I mitt examensarbete har jag också studerat olika torgstrukturer från olika epoker under 1900-talet då byggnadsidealen skilt sig åt.

I en global marknad blir det allt mer viktigt fo?r svenska industrier att effektivisera sina produktionsprocesser genom sta?ndiga fo?rba?ttringar och en offensiv kvalitetsutveckling. Shiloh Industries i Olofstro?m vill o?ka sin konkurrenskraft genom att fullt ut implementera filosofin Lean Production i sin verksamhet och i enlighet med detta ska en helt ny produktionslayout tas fram. Studien syftar till att finna aspekter fo?r beaktning vid utformning av en produktionslayout som finner sto?d i Lean Production.

Examensarbetet har utförts på Sandvik Coromant i Gimo, GH. Produktionsenheten tillverkar hårdmetallskär för borrning, svarvning och fräsning. Arbetet syftar till att undersöka metoder för att minska material i arbete samt förkorta ledtiderna på enheten. För att uppnå en resurssnålare produktion undersöks möjligheterna för Lean Production och andra arbetssätt som anses ge förbättringar av flödet. Som grund till arbetet ligger intervjuer av personal på enheten i Gimo, litteraturstudier samt ett besök på ett företag inom Sandvik koncernen som lyckats med att minska material i arbete samt förkortat sina ledtider.

The degree project is performed at Metso Kamfab. The production is aimed on machines everything from handling of fiber to paper pulp. Metso Fiber and Kamfab are using Pro/Engineer for design and blueprint production. The processing department types the NC-programs in notepad on the basis of the blueprints, the CAD-dates that already is there are not used. The aim with the work is to study if Kamfab can use CAM-system for processing and production of programs for their NC-machines.

The interest in small-scale electricity in Sweden has increased strongly in recent years. The interest is noticeable both among politicians to increase the share of renewables in the energy mix, and among electricity consumers to partially replace purchased electricity with self-produced. This has resulted in a significant increase of electricity production in low voltage grids in recent years, and the trend appears to continue in the coming years. The majority of the new production plants are solar cells, followed by wind turbines, and it is also in these the greatest efforts are made in this paper.Distributed generation is often seen as something positive since it will contribute to reduced transmission losses and reduced voltage drop in the networks, and that it increases the share of electricity from renewable sources. In cases where the grids are not strong enough, or in other ways not adapted to manage the installed production, power quality may be adversely affected.

To make your company change from a conventional workflow to an ICC-based workflow you need tomake investments in time and money. On the other hand you get your reward in terms of a stable andquality safe production. To choose this way of adjusting your company to new routines requires accuracyas well as a great deal of commitment. It is not only about having the right equipment. There area lot of factors that affect the quality of production.Our ambition with this report is to bring out the importance of general thinking when it comes toICC-profiling and to discuss on which basis printing profiles should be created.

ABSTRACTMany wind turbines have problems with icing and there is still no effective method to de-ice without stoppage of production and power loss. Here I therefore consider other methods than those available today, and particularly, I consider how these methods could be applied to wind turbines of the company Oxel. A surface where the water droplets do not attach might be the basis for a useful method. If no water attaches, no ice could form. To accomplish this a hydrophobic surface is nessesary, for example wax.

During the period 2009-2013, investments in the Swedish national grid increase by a factor of ten compared to previous years. In order to fulfil their mission to manage the national grid in a safe, efficient and environmentally sound way, Svenska Kraftnät (Swedish National Grid) needs to take all these perspectives into account while planning new investments. To compare and relate perspectives of technology, economy and environment the same yard stick must be used. That yard stick is commonly money. A problem arises however as environmental issues are difficult to price.The purpose of this master?s degree project was to develop a tool for evaluation of environmental impact related to investments in the Swedish national grid.

The purpose of our essay is to find out if there are any strategies for profit transactions in a group. To realise our purpose we conducted two case studies with interviews. But we can not draw any general conclusions.To conduct the research we had to build a theory. In this theory we found motives to do profit transactions and how to do it. We also thought that there had to be some conflicts between the motives and the manager´s interests.In our analysis we found that financing the dividend was a strong reason to make profit transactions between companies in the group.

This study shows how to plan a pond with an ecosystem which although it will have turtles living in it will not need to be cared. I will also demonstrate how this pond would be designed to work in the natural landscape on Mallorca. The background to the study is that I am interested to investigate how plants that we in Sweden are using as indoor plants are growing in their natural landscape and how to build a land-scape with them. The study highlights different cleaning-systems that can be used to clean a pond in a natural way. A comparison will be made between the conditions of an exterminated turtle-species which will live in this environment and a species that is easier to care for.

The aim of this study was to examine differences in the experience of intrinsic work-motivation and to examine changes depending on profession, where the purchasers experienced a higher level of individual demands and control than the production leaders. Another purpose was to see how the intrinsic motivation needs predicted mental well-being in the professions. The study was carried out using an internet survey that was distributed by e-mail, there were 98 participants. Two questionnaires were used; Basic Need at Work scale (W-BNS) measured intrinsic motivation and GHQ12 measured mental well-being. The result showed that the staff overall had high intrinsic motivation with highest scores on relatedness followed by competence and lastly autonomy.

Cambodia, in Southeast Asia, has tropical monsoonal climate with distinct dry and rain seasons. Many people are poor and live in rural areas. Farmers mainly culture rice, and raise pigs, cattle and poultry as well. During two months, a minor field study was performed in Cambodia. The main purpose was to evaluate the impact of contributions done by projects that started in 2005 and were managed by the local organization CelAgrid.