As a small and land scarce country, effective waste management is ofoutmost importance in Singapore. In this study the production of biogasthrough anaerobic digestion from the organic fraction of municipal solidwaste (OFMSW) was compared to incineration of the waste. At the momentalmost all of the OFMSW in Singapore is incinerated. Three differentscenarios were compared to the reference scenario (incineration): one with alarge scale biogas plant that can treat half of all OFMSW in Singapore, onewith a medium scale biogas plant about 15 times smaller than the large oneand one with a small scale biogas plant that can treat waste from e.g. ashopping center or a food center.By using life cycle assessment (LCA) the different scenarios were comparedin terms of global warming potential (GWP), acidification, eutrophication,energy use and land use.

Background: Businesses are traditionally valued with the so called Discounted Cash Flow-model. When valuing newly-started businesses, surrounded by high uncertainty, and whose capital mostly consists of unrealized business opportunities, the Discounted Cash Flow-model needs to be complemented if the total value of the business is to be captured. A valuation with the help of real options is capable of valuing these unrealized opportunities, which often exist in newly-started businesses. The unrealized opportunities are to be found in the business plan of the business, why this needs to be valued to capture the total value of a newly-started business. Purpose: To demonstrate what the use of real options can result in when valuing businesses.

The component workshop at Atlas Copco inTierp intends to reduce the costs inorder to increase their competitiveness.This thesis examines how the productionmanagement around cylinder washersshould be managed in a way that meetsthe customer needs. The customer to thecylinder washer is Atlas Copcos assemblydepartment in Tierp.The purpose of this thesis is to providean alternative way of managing theproduction. A chapter of theory is addedto give the reader an insight ofdifferent types of production managementsystems as well as the underlyingknowledge needed to get a better readingexperience. An introduction of kanbancan in theory help Atlas Copco in thedirection they strive. It should beclear how the purpose of this thesisaffects the cost for the componentworkshop and also how it relates to thecurrent production.

This study was a degree in Master of Science in agriculture with specialization in animal science for the Department of animal nutrition and management at SLU. The subject was created by AS-Faktor, a small company for science and development within the company Lantmännen AB. It was a test of the effect of SPC (Special Processed Cereals) on induction of the endogenous protein AF (an antisecretory factor) in plasma and intestinal lumen in broilers. Previous results have shown positive effects on different intestinal diseases in pigs, horses, dogs as well as in humans. Beside the induction we also studied the effects on results in a conventional slaughter chicken production, including the ability of SPC to compete with or be affected by the coccidiostat, Salinomax.When diarrhoea occurs, it's because there is an imbalance between the secretion and the absorption and it can be caused by for example toxins.

This essay has been made on behalf of the co-operative society Mäster Grön, which is selling ornamental plants to retailers in Sweden. The aim of this study has been to find out what added value Mäster Grön gets from their co-branding with the Swedish Seal of quality. The main topic of discussion was; how much value added does this co-branding give to Mäster Gröns pot plants? Are there differences from a customer point of view in value added between a garden center and a retail store? How much weight does the costumer put on the branding when buying a plant? Does the customer know what the values of Mäster Grön and Swedish Seal of quality mean? Two questions of lesser worth were asked to the consumers about what they thought about the protective plastic around the plant, and if they were interested in getting more information about the origin as well as the method of production of the plant. The study was divided into two parts, one in which customers were observed and one where the customers answered a survey.

Bravida is one of Scandinavia's leading suppliers of technical installations and services. According to Bravida an installer loses around 35 per cent of their daily work. It?s the time aspect that?s going to be examined in this thesis. The purpose of this thesis is that the student in question is to investigate the activities of the installers that works with this project, identifying where and how time losses occur and come up with suggestions for improvement.Methods used in this work is literature studies, observational studies and interviews.

For Skattkärr IF a turf field with warming has been projected to increase field?s utilization hours and to have a longer period for athletes to perform their activities outdoors. The technique chosen to heat the plan is a type of a geothermal heating system without a heat pump. The brine, which is water with 30% ethanol, collects heat from the borehole and discharges it to a coil in the field. There is at position 11 boreholes but it is planned to increase the number to 31, which is the design for the facility.

Ethanol produced from lignocellulosic biomass has the potential to become a promisingalternative to gasoline. In this work the simultaneous saccharification and fermentation (SSF)technology was applied for ethanol production from hardwood with focus on cell growth,ethanol production and contamination.The SSF was performed at PH 5.5 and 35°C for different suspended solid concentrations(8%, 10% and 12%) of pretreated birch slurry which contained 16 % total suspended solids.Two different hexose fermenting yeast strain (Ethanol Red) and pentose fermenting yeaststrain were used.Quantifying the concentration of chemical components and metabolites in the fermentationmedium demonstrated that glucose and xylose are the major fermentable sugars in the slurry.The higher load of slurry (12%) represents a higher content of carbohydrates and potentiallyhigher end concentration of ethanol. Moreover, more lactic acid is produced with the lowerload of slurry (8 % or 10 %), presumably due to a result of a less inhibitory environment forbacterial growth. In this context, acetic acid sticks out as the most important inhibitor withconcentrations of 15.2 and 12.5 and 9.7 g/l respectively in the 12 %, 10 % and 8 % (ofsuspended solids) trials. Using pentose fermenting yeast may lead to higher ethanolproduction, lower xylose uptake and lower lactic acid formation.

It's not a secret that most companies strive to get such a high economic return as possible. To successfully engage in a profitable enterprise, there are many elements that come into play. An important element is the motivation of the employees and their work performance. Work motivation is a key factor for the employees to improve their performance and therefore determinant for the successes of the company.This work is a case study in the production at Fresenius Kabi, Uppsala. The work is based on an employee survey that they fill out once a year and the aim is to develop a deeper understanding for these questions and how the employees see on leadership, communication and goal-setting as motivators and how these factors works in the company today.To get this deeper understanding I have used a qualitative approach.

Sheep breeding contributes not only with wool, hides, meat and milk but also with openlandscapes. The sheep?s wool is a good raw material thanks to a lot of different qualities as itis water rejecting and easy to form. The wool production today is concentrated to specificplaces in the world which leads to environmental problems and a distorted market. InJämtland, a province in Sweden, there is right now a staking going on for local production andrefining of wool in a project called Ullforum.

Följande rapport är resultatet av det examensarbete som utförts våren 2011 inom innovativ produktion/logistik vid Mälardalens Högskola. Examensarbete behandlar ämnet Green Production med fokus på skillnader mellan ett produktionssystem som bygger på Lean Production och ett som bygger på Green Production. Områden som berörs i rapporten är de verktyg som används i de olika produktionssystemen, hur arbetet med miljöförbättrande åtgärder kan se ut i praktiken samt vilka svårigheter som finns vid arbete med miljöförbättrande åtgärder i ett företag. Examensarbetet består av en litteraturstudie där aktuell litteratur studerats inom området samt en intervjustudie som genomförts med insatta inom miljöfrågor kopplat till produktion samt operatörer.Bakgrunden till examensarbetet grundar sig i att världen står inför en framtid där många utav de råmaterial som används idag vid produktion inte kommer att kunna nyttjas i framtiden. Detta i kombination med de miljöproblem som människan åsamkat, har bidragit till att många företag insett att miljöaspekter måste vara i åtanke genom hela produktionsprocessen.Den uppfattning som erhållits genom intervjustudierna är att det är viktigt för ett företag att visa att de arbetar med miljöförbättrande åtgärder.

Several technical solutions are ready to step forward as the new generation of propellant, and this report aims to explore the possibility of commercializing fuel cell cars. The report is based on current research and data from today's technology and engineering solutions that are estimated to be commercially realized before 2020.A mapping of today?s different fuel cell options has shown that the most suitable fuel cell option is the Proton Exchange Membrane Fuel Cell, which uses hydrogen as fuel. The report is focusing on a techno-economic well-to-wheel analysis of hydrogen and the energy balance and costs in a system perspective. The basis for this analysis consists of two centralized methods of production, steam methane reforming (SMR), and alkaline water electrolysis.

This thesis on the sustainable urban development has the intent to discuss the conservator?s position in alteration of the built environment. An essential component of the thesis consists of a case study in the form of an entry in an open architectural competition for the development of Furuset, an urban residential area in Norway. The thesis? discussion is based on two approaches to change and socio-economic transformations, considered being dominant within the heritage theory and practice: the production of ideas and great narratives and conservation as an instrumental tool.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

This exam report has been developed in association with Strangbetong AB, Sweden.The natural gravel that is being used as fine aggregate for concrete production today is an ending natural recourse and the Swedish government has decided to strongly reduce the extraction from the year of 2020. The only reasonable replacement is aggregates from crushed rocks but this material has other properties than natural aggregates. The concrete manufacturers now have to learn how to use these new fine aggregates in a cost effective way in order to ensure the quality of their concrete production.In this project, crushed aggregates and combination of crushed and natural aggregates have been tested with existing formulas for fresh concrete. The two parameters yield stress and plastic viscosity have been measured which gives a good description of the workability of the fresh concrete. Different methods to make measurements on the dry fine aggregates, has also been tested, to find out if there is any correlations between these parameters and the parameters from the measurement on the fresh concrete..