The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

The agriculture is today in a development that leads to bigger and bigger units in the primary production. To be able to follow this development many companies chooses to cooperate in different ways. The most radical change is when farmers fuses with other farmers and merge into to a big collectively owned operation firm. The reason behind this idea is that the firms achieve the big companies advantages by being complement to each other. The purpose of this essay is to make an economic analysis of two crop production companies who works together in an operation firm.

Ocean Thermal Energy Conversion (OTEC) is a technology that utilizes the temperaturedifference in oceans between the warm surface water and the cold water at 1000 m depthto produce electricity. The purpose of this report is to investigate if OTEC with its synergiescould become a commercially feasible energy solution for a small island. A literature reviewis conducted to explore the different OTEC technologies and to what extent the threesynergies; fresh water, air conditioning and aquaculture, could be used. In order to calculatethe profitability of these synergies there is also a study conducted on the conventionalmethods and cost of fresh water production, aquaculture and air conditioning. A model is setup using a scenario of a small tropical Island with population of 100 000 people.

At SIA TallOil's pellets factory in Latvia wood shavings and saw dust are dried with flue gases from a gas burner. TallOil wants to replace the gas with a biofuel that is available at the pellet plant. The reason for this is the unstable gas market in Europe in combination with the fact that TallOil wants to improve its profile as supplier of renewable bio fuels. In this project the technical and economical possibilities for a fuel conversion to ether bark powder, wood shavings or wood powder have been investigated. These fuels should be burned in one of the following applications: TPS BioSwirl, VTS Multifuel burner or Saxlunds bio fuel combustion plant Due to the fact that the fuel alternatives available are relatively common except for bark powder, the work has mainly been focused on bark powder.

Den ökade förändringstakten i samhället på grund av ny teknik, internationalisering och att samhället blivit alltmer mångkulturellt bidrar till att större krav ställs på företag att hela tiden förbättra sin verksamhet. Akzo Nobel Surface Chemistry, Production Surfactants i Stenungsund, har huvudsakligen sina kunder och konkurrenter runt om i Europa. Då Sverige ligger i utkanten av detta område tar det omkring en leveransdag längre tid för Production Surfactants att leverera sina produkter i jämförelse med företagets konkurrenter. Detta medför att Production Surfactants behöver kompensera denna längre leveranstid genom exempelvis högre produktkvalitet, större flexibilitet eller lägre priser för att ha möjlighet att tävla på marknaden. För att uppnå detta behöver Production Surfactants utveckla och systematisera sitt förbättringsarbete.

The purpose of this paper is for the reader to realise how national innovation systems are deeply intertwined with the legal background of a country and to understand the processes that involves national innovation systems specifically regarding the stem cell / genetics research and how the need for specific community law must be considered targeting the stem cell patents. The legal part will try to answer: Why is it important given the actual state of the European stem cell national innovation systems for the European Commission to take a stand and tackle issues regarding the patenting of the human stem cell innovations? This is done from a country industry analysis (business approach) and then linking it with competition law from a community stand point of view (that tackles biotechnology issues). In order to achieve this the paper is divided into three separate analyses beginning with a theoretical background of general biotechnology / genetic terms that will enable the reader to have a general understanding of the importance of this kind or research ( genetics / stem cell research). The chosen countries case studies exemplify very diverse economies and development perspective from the traditionally R&D intensive to the least and from the biggest countries in Europe to one of the smallest, thus giving cultural, legal, economic and scientific variety..

Relationships and trust between humans create the psychosocial working environment. This is a basic human activity and is communicated in a continually ongoing process. Conciseness about the value of trust and social capital motivates the need for work, with threats to communication, being conflicts and noise. This can create greater trust in the workplace as a whole, as well in the working team. Scientists are increasingly interested in these social relations in the working environment; there are profits, both for production and in terms of individuals2019 well being, in shifting the focus away from a purely production-oriented, economic perspective.

The purpose with this report is to give structure to the storage area betweenproduction and packaging at Spaljisten AB in Åseda. The purpose is also to givesuggestions for improvements of work tasks and thereby simplify and improve thematerial handling at the packing process.The background of the task is that Spaljisten AB is going to increase theirproduction and thereby they also need to increase the packing rate of theirproducts. They will manage this by installing a new automated packing line andincrease the efficiency of the old manual one. The theoretical background ismostly obtained from literature which contains relevant facts for our report.The storage area has been studied visually in order to search for improvements oftoday?s layout.

För att ett företag ska kunna hålla sig flytande på marknaden idag krävs de att de har hundra procent koll på vad som sker i deras fabriker och att de strävar efter en mer hållbar tillverkningsprocess. Att försäkra konsumenterna om att fabrikerna inte använder sig av barnarbete eller dåliga arbetsförhållanden räcker inte längre utan det krävs en bredare kunskap inom miljö och hållbar utveckling för att den trogna kunden ska stanna. Syftet med denna rapport är att kontrollera det nyuppstartade företaget DENIM IS DEAD?s produktion och utvärdera om hur man kan förädla de olika processtegen samt skapa transparens gentemot kund.Metoden som arbetet utformades efter var genom en fallstudie som är baserad på en mestadels deduktiv metod men med inslag av induktiv metod. Där grunden lades genom en utförlig faktainsamling för att i rapportens senare del kunna analysera de hypoteser och problemformuleringar som ställts.Målet med rapporten var att ta fram en metod eller produkt som ska underlätta kommunikationen med DENIM IS DEAD?s kund.

This is an investigation of a mobile prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking damage the elements which often occur during transportation. The contractor is owner of the mobile prefabrication factory and can thus avoid long waiting times and cyclicality.

School ground development is becoming increasingly popular in Sweden today and local community settings are also seen as an important resource for education. The debate today raises the question about the whole city?s pedagogic potential. Outdoor education is a pedagogy that comprises outdoor learning with focus on the sensual experiences. Connection to the classroom education is an important part of the pedagogy and so is the place for the tuition.But how should the place for the tuition, i.e.

Until 2020, 49% of Sweden's use of energy must derive from renewable sources. Greenhouse gases must as well decline with 40% compared to 1990 as a part of Sweden's 16 environmental objectives. Biogas is part of the effort to achieve these objectives, but as the demand for biogas increases, more substrates are needed to meet the demand. The purpose is to investigate the conditions for pea residue as substrate by performing lab-scale mesophilic digestion with different fractions and notch lengths and then to summarize pea residue as a substrate for biogas production. During anaerobic digestion, 1000 ml bottles were used as reactors for digestion.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

Over the last decade, the private insurance market has undergone a stable growth in turnover and growing demand for insurance products in all Member States of the European Union. Therefore, the creation of a single market in insurance will enable consumers to have access to wider choice of insurance products, and insurance companies to gain access to markets in various Member States and compete effectively. The EU legal framework for the insurance industry embraces the Treaty freedoms of services, establishment and capital, the EC Directives and the ECJ case-law. The present thesis identifies numerous factors that hinder the Community insurance market integration and offers possible remedies. The summary of the market obstacles is all-inclusive and reflects the responses to the questionnaires and the Commission surveys.

The quantity of methane emissions from sheep depend on several factors, for example, the composition of the diet, feed quality, the age of the animals, time of the day and maybe also breed and sex. A comprising literature review was made about which factors that affect the size of emissions. In addition, a questionnaire was sent to two farms, one with a more intensive production system and another with a more extensive system. Inventories of the two farms were made; the rest of the data needed to conduct the study was taken from literature and other sources. Meat produced at the more intensive farm caused emissions of 0.4 kg of methane per kg of bone free meat and the more extensive farm caused emissions of 0.9 kg methane per kg of bone free meat.