Sammanfattning  Datum:                               2011-01-14 Kurs:                                  Kandidatuppsats i företagsekonomi Lärosäte:                           Mälardalens högskola Akademi:                           Akademin för hållbar samhälls- och teknikutveckling Handledare:                      Lennart Bogg Examinator:                      Cecilia Lindh Författare:                         Wilhelm Moby och Pia Robson Nyckelord:                         Lean Production, implementering, effekter. Titel:                                   Det lutar mot Lean ? en jämförelse av arbetet med- och effekterna av Lean Production på ASSA AB med teoretiska kunskaper inom ämnesområdet.                                           Problemfrågor:                 Hur har ASSA AB gått tillväga för att införa Lean Production och vilka faktorer har varit avgörande?Vilka effekter har införandet av Lean Production givit verksamheten? Syfte:                                 Den här studien ämnar undersöka och sedan jämföra arbetet med- och effekterna av Lean Production hos ASSA AB med teoretiska kunskaper inom ämnesområdet.   Metod:                               Metoden är av kvalitativ karaktär och med hjälp av djupare litteraturstudier och en semi-strukturerad intervju ska studiens syfte uppfyllas. Slutsatser:    Resultatet av den här studien kan sammanfattas med att det som framkommit i den empiriska undersökningen mycket väl överrensstämmer med det som sägs i den teoretiska referensramen. ASSA AB har först infört verktygen 5S och standardiserat arbetssätt, vilket möjliggjort införandet av andra verktyg såsom kanban. Inget av detta hade dock varit möjligt med ett lyckat resultat om inte personalen först blivit utbildade och en leankultur skapats.

There is a common belief that the arts contain knowledge of creativity that can enrich the business world. Similarly, the arts are in need of additional support from the private sector and know-how of business practices. In short, there is a need for mutual understanding. With my background as a dancer paired with my studies at the Stockholm School of Economics I have taken the challenge of bringing the two worlds closer together. By changing a social system, like an organization, it is possible to get a better understanding of it.

This paper aims to determine what is decisive for localisation of production units when a company engages in offshoring. By performing a case study on Electrolux and comparing the results with theoretical literature we discuss the implications for manufacturing companies in general. To facilitate a structured analysis we have developed a model dividing the localisation decision into five perspectives and four geographical levels. We have found that the determinants of localisation vary depending on the geographical level of the decision process. Since all geographical levels are interconnected, the analysis needed for a decision on all levels simultaneously is very comprehensive.

AbstractThis essay examines the idea of unity in the early church, based on Psalm 133:1. My interest in this was awakened during a seminar with the scholar Sr. Dr. Michaela Puzicha OSB, who proposed that St. Benedict of Nursia in his Rule, RB 42, alludes to Ps.

By analysing Still the water (2014), Radiance (2017) and True Mothers (2020) by Naomi Kawase this essay will look at her work to see how she portrays the experience of being a woman in relation to her community. Looking into her way of using the camera by applying the theory of haptic visuality allows the spectator to identify themselves in a bodily relationship with the image. By using the camera to closely frame objects of importance for the characters, Kawase leads the spectator to understand the world of the film and enables a more profound understanding of their experience. For the community to be of importance for the women it must be founded in the feeling of security and a confirmation of their feelings. Once secure, the women can express themselves and by that, feminist politics..

Since the Human Immunodeficiency Virus (HIV) that causes Acquired Immune Deficiency Syndrome (AIDS) was discovered in the 1980s, the condom has scientifically proven to be the only technological device that can prevent transmission of the virus during sexual intercourse. This technical approach to the HIV has strongly emphasized that prevention is only possible if the condom is properly used. However, as a technological artifact the condom has shown that its use is laden with values. The question of values on condoms has brought in a heated debate on the moral justifications of its use. In Malawi, just as in other African countries, the Faith Community has rejected the Governmentsplea to promote condoms as the preventive measure against the virus.The Faith Community has emphasized on abstinence and mutual faithfulness as the only reliable means to the prevention of HIV/AIDS.

The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

The purpose of this study was to examine whether a L2 learner could correct or imitate structures of the language that they could not produce in written production defined by processability theori levels.The Informants had Arabic as their mother tongue. The study showed that the ability of correction developed slower than the capacity for imitation and the ability to written production. The ability of the correction developed by the duration of the stay. The result was a confirmation of theory formation in processability theory. Corrective elicitering could be developed into a useful diagnostic tool in the classroom and thus provide an education that followed a natural learning order according to processability theory by Pienemann.Keywords: processability theori, imitation, correction, written production.

Ocean Thermal Energy Conversion, OTEC, is a sustainable energy conversion technology that is not yet commercialized. OTEC is a technology that utilizes the temperature difference in oceans between the warm surface water and the cold water at 1 000 m depth to run a Rankine Cycle. This technology can produce electricity and provide synergies like fresh water, air conditioning and aquaculture. A simulation program for three alternative OTEC systems has been created in order to decide which OTEC system is most profitable; closed, open or hybrid system. In this simulation a production cost analysis is performed in order to investigate and decide which one of the three systems that has the lowest production cost. The production cost analysis also analyzes if the profitability is affected by the size of the facility. After these analyzes, the most profitable of the three different OTEC-systems is expanded by an installation of solar collectors in order to see if the thermal efficiency is improved. The result shows that the most profitable system varies with the size of the facility.

District heating covers most of the residential areas and industries in the twoneighbouring Swedish municipalities Nyköping and Oxelösund. In Nyköping,Vattenfall AB Värme produces heat in a bio-fuelled CHP plant. In Oxelösund,waste heat and use of waste gases from the steel production at SSABOxelösund is the basis in the district heating system.This report examines the environmental consequences of a connection betweenthe two district heating systems. A broad system approach is used and the focusis on environmental effects in the system.A system analysis has been performed on the result of simulations of differentheat and electricity production alternatives. The alternatives simulated wereone where Vattenfall Nyköping covers the base load in the joint district heatingsystem and two where the power plant at SSAB Oxelösund supplies the heatbase load.The conclusion in this report is that the consequences of connecting the twodistrict heating systems can be both positive and negative, depending onsystem boundaries and on the environmental focus.

The organic farmland is increasing all the time and the goal is that 15 % of the Swedish farmland will be in organic production in year 2010. The organic production needs new and more effective ways to control weeds, and there is the row harrowing coming as a good complement to the conventional weed harrowing. In this experiment is weed harrowing whit different row spaces and row harrowing with a spacing of 25 cm compared. Then are the weed picked and the weight taken of them. The yield is compared in the 7 different ways of treatment. The results is not showing any significant differences in yield even when the row spacing is 25 cm instead of 12,5 cm. Even the spring wheat that is a sensitive crop and has bad tillering is doing well in this experiment. Now with modern technology where the row harrow is controlled by a camera that making the row harrow to follow the rows is it the soil coverage of the crop that is the limit for the speed. With wide machinery is the very good coverage even with a row harrow..

The energy sector of modern time is currently faced with several challenges. These are both production oriented and environmental oriented in nature. The energy of the future is intended to support an increasing demand while at the same time reduce its environmental affection. This stresses a development towards production methods of renewable energy. Among the existing methods, biogas is presented as an attractive alternative.

Oilseed rape is an important crop in Sweden and is grown on about 90000 ha today. The interest in oil seed pro-duction is increasing because of growing demand and high prices for oil seed both in Sweden and Europe. However, an increased intensity in the oil seed production can bring higher risk of yield losses due to fungal diseases. The purpose of this study was to investigate what different fungi are associated with oilseed rape under field conditions and if their incidence is correlated to crop establishment problems. This study was carried out in three parts: 1) investigations on fungal community structure in roots and rhizosphere soils from young spring- and winter rape plants sampled in failed respectively good establishment patches in four fields, 2) investigations on the pathogenicity of fungi isolated from oilseed rape in controlled environment and 3) investigations on the effect of different fungicide seed treatments on germination and early plant development in a field soil naturally infested with damping off- and Verticillium wilt pathogens. The studies on community structure using a combined approach of standard fungal isolation techniques and DNA based methods revealed a high fungal diversity in three out of four studied fields of spring rape and winter rape. For some unknown reason, very few fungal species were identified from the fourth field.

Arvika Smide is a supplier to the automotive industry with a focus on advanced drop forgings including powertrain and bearings. The great experience and high quality is Arvika Smide?s speciality. Today's competition in the industries puts high demands on the efficiency where each company has a quest for perfection.Arvika Smide has been through the thesis of Karlstad University, called for a situation analysis of aftertreatment whose effectiveness has not been fully desirable. The department includes the production steps blasting, quality control and packaging.The thesis contains the results from the situation analysis and comparisons of the calculations for selected reference period Q4 2009th.

In Sweden we need more lambs during March to June. I decided to calculate on a spring lamb production, because to many of the Swedish lambs go to slaughter in the autumn. I counted on 1000 ewes which have 2000 lambs each year, 200 of these lambs stays on the farm and replace old ewes. The buildings are 3600 square meters. I have counted on two different sorts of buildings, the first one is a shed, the second one is three polytunnel sheephouses.