The degree project is performed at Metso Kamfab. The production is aimed on machines everything from handling of fiber to paper pulp. Metso Fiber and Kamfab are using Pro/Engineer for design and blueprint production. The processing department types the NC-programs in notepad on the basis of the blueprints, the CAD-dates that already is there are not used. The aim with the work is to study if Kamfab can use CAM-system for processing and production of programs for their NC-machines.

The interest in small-scale electricity in Sweden has increased strongly in recent years. The interest is noticeable both among politicians to increase the share of renewables in the energy mix, and among electricity consumers to partially replace purchased electricity with self-produced. This has resulted in a significant increase of electricity production in low voltage grids in recent years, and the trend appears to continue in the coming years. The majority of the new production plants are solar cells, followed by wind turbines, and it is also in these the greatest efforts are made in this paper.Distributed generation is often seen as something positive since it will contribute to reduced transmission losses and reduced voltage drop in the networks, and that it increases the share of electricity from renewable sources. In cases where the grids are not strong enough, or in other ways not adapted to manage the installed production, power quality may be adversely affected.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

To make your company change from a conventional workflow to an ICC-based workflow you need tomake investments in time and money. On the other hand you get your reward in terms of a stable andquality safe production. To choose this way of adjusting your company to new routines requires accuracyas well as a great deal of commitment. It is not only about having the right equipment. There area lot of factors that affect the quality of production.Our ambition with this report is to bring out the importance of general thinking when it comes toICC-profiling and to discuss on which basis printing profiles should be created.

ABSTRACTMany wind turbines have problems with icing and there is still no effective method to de-ice without stoppage of production and power loss. Here I therefore consider other methods than those available today, and particularly, I consider how these methods could be applied to wind turbines of the company Oxel. A surface where the water droplets do not attach might be the basis for a useful method. If no water attaches, no ice could form. To accomplish this a hydrophobic surface is nessesary, for example wax.

Being an architect I create spaces with roof, walls and fl oor. The availability of the essential materials to create such spaces is practically unlimited. The materials also play a significant part to the character of the created space. I hope to contribute to the general understanding of materials as elements in the design of urban spaces by having intensely explored one specific material in depth, pointing out its bad and good qualities. I am of the opinion that the reason for choosing a material shouldn?t be because of a shortage of knowledge, facts or references, but what character you want for the room. When travelling across Europe, it sometimes feels like clay paving is everywhere, but back in Sweden it is almost unseen of in modern landscape architecture.

During the period 2009-2013, investments in the Swedish national grid increase by a factor of ten compared to previous years. In order to fulfil their mission to manage the national grid in a safe, efficient and environmentally sound way, Svenska Kraftnät (Swedish National Grid) needs to take all these perspectives into account while planning new investments. To compare and relate perspectives of technology, economy and environment the same yard stick must be used. That yard stick is commonly money. A problem arises however as environmental issues are difficult to price.The purpose of this master?s degree project was to develop a tool for evaluation of environmental impact related to investments in the Swedish national grid.

The term "Project" have become a growing work model that exist in almost all bransches. A project is a work effort made over a finite period of time with a start and a finish to create a unique product, service, or result. Science shows that time limitation has an impact on humans to perform under pressure, which challanges the contributor to deliver. This report contains an examination about project management, both coming from scientific results and an external business. The point of this study is to bring ideas of improvement, which can make the work method more effective in this company..

The purpose of our essay is to find out if there are any strategies for profit transactions in a group. To realise our purpose we conducted two case studies with interviews. But we can not draw any general conclusions.To conduct the research we had to build a theory. In this theory we found motives to do profit transactions and how to do it. We also thought that there had to be some conflicts between the motives and the manager´s interests.In our analysis we found that financing the dividend was a strong reason to make profit transactions between companies in the group.

The aim of this study was to examine differences in the experience of intrinsic work-motivation and to examine changes depending on profession, where the purchasers experienced a higher level of individual demands and control than the production leaders. Another purpose was to see how the intrinsic motivation needs predicted mental well-being in the professions. The study was carried out using an internet survey that was distributed by e-mail, there were 98 participants. Two questionnaires were used; Basic Need at Work scale (W-BNS) measured intrinsic motivation and GHQ12 measured mental well-being. The result showed that the staff overall had high intrinsic motivation with highest scores on relatedness followed by competence and lastly autonomy.

Cambodia, in Southeast Asia, has tropical monsoonal climate with distinct dry and rain seasons. Many people are poor and live in rural areas. Farmers mainly culture rice, and raise pigs, cattle and poultry as well. During two months, a minor field study was performed in Cambodia. The main purpose was to evaluate the impact of contributions done by projects that started in 2005 and were managed by the local organization CelAgrid.

The weather has been extremely rainy the last summers in Sweden. Because of the rain, a lot of harvested straw has been lost since it was too wet to store. When the pig producers couldn?t get enough straw to use as bedding, an alternative was requested. Silage is a realistic alternative to straw but since silage often contains clover, it may not be suitable to use in pig production since clover is rich in phytoestrogens.

The purpose of this thesis is to evaluate 7 different search strategies for content-based image retrieval with respect to retrieval effectiveness. The strategies are based on different levels of resolution implemented by the Haar transformation. The result of the study shows an improvement in both mean average precision and mean recall in strategies based on lower levels of resolution..

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.