The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

This thesis aims to examine the viability of various techniques for increased electricity generation in CHP plants and the effect of electricity price fluctuations on the profitability.The techniques examined are fuel dryer, pellet production, methane production, combined methane- and pellet production, seasonal heating storages in caverns and pit heat storages and condensing tail. Using Excel and Matlab, the prerequisites for investment costs, revenues and expenses were calculated.What affects the price of electricity is a combination of economic and technological development, energy prices, economic structure, population changes and weather. Different scenarios for the electricity price were therefore examined. In the base case, the electricity price was given by the Nord Pool electricity price statistics of area three in 2011. Thereafter, WiMo was used to design the electricity scenarios for 2030, which was then applied to the data to obtain the viability of various scenarios. The techniques examined were found to give greater profits to the CHP plant by increasing and optimizing the production of electricity.

The civil war in Sierra Leone was a very complicated conflict, both in its origin as well as in its realization. Many actors, along with the diamond trade, played vital parts in making the war carry on for a decade. In this paper I will try to clarify the relations between the actors and the diamonds, first and foremost the part the diamonds played in the conflicts start and continuation. I will also show what has happened in the country and in the diamond industry after the wars conclusion. What I find is that diamonds did not play the only part in the origin of the conflict but that the poor economic state the country was in had its part.

Water is an essential factor for both people and animals, and access to water is therefore of great importance. The water access also largely determines the availability of food for people and feed for animals. The aim of this study was to survey the affect of water access on milk production from dairy animals. The study included nineteen farm visits that were made in the Nyando district in Kenya between February and Mars 2011. Farm visits included interviews with questions about for example number of dairy animals, milk production, water access, feed and water routines.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

Konkurrensen i tillverkningsfo?retag o?kar sta?ndigt och detta medfo?r att det sta?lls ha?rda krav pa? produktkvalitet och fo?rma?gan att leverera produkter i tid. Fo?r att fo?retag ska kunna na? upp till dessa ma?l kra?vs utveckling och sta?ndiga fo?rba?ttringar i takt med den va?xande marknaden. Detta uppna?s pa? olika sa?tt men ett vanligt sa?tt a?r att arbeta med fo?rba?ttringsmetodiker.

This study was conducted at Glimek AB, a company that has chosen to decentralize its central storage unit in order to increase production efficiencies. The purpose of the study was to identify the problems in the production cycle that lead to the decision to decentralize the central storage unit, as well as identifying what the decentralization entails. The effects of the decentralization have not been analyzed in the study, and consequently neither financial nor production disadvantages have been considered.Appropriate questions were formulated based on the chosen underlying theories, and were asked to selected individuals with relevant knowledge. The study is based on the information that was gathered from interviews with management as well as staff within the company. In addition, supporting information such as flowcharts, drawings, orders and decision support documents were supplied by the company.

Due to increasing product availability and higher demands on fast deliveries, the competition between companies is growing. To be able to satisfy the customers? requests an efficient logistics system with short throughput time is required. By using tools associated with Lean production companies are able to make great improvements in their manufacturing systems and reduce lead times to satisfy customer demands.There are two classifications associated with manufacturing, high variety and low volume (HVLV) and low volume and high variety (LVHV). The general belief is that the concept of Lean production is difficult to implement in a production environment with high variety and low volume due to the concept being adapted to mass production.

The purpose of this paper is to find out which portfolio theory one should use during a financial crisis. We will examine two different portfolio theorys, the Minimum Variance portfolio and the beta portfolio.We have chosen to study two different portfolios, and followed their development during the financial crisis with its start in 2008 and the IT bubble with its start in the middle of 2000.The data has been collected from OMX internet database making it quantitative study. The beta portfolio's objective is to follow the index and the Minumim Variance portfolio´s objective is to spread the risk by investing in stocks with low volatility. By following the two different portfolios, and compare the development to the index, we will be able to determine which theory is most suitable to use during a recession. The studyperiods we chose were both in a recession and it turned out that the most appropriate portfolio to use was the Minimum Variance portfolio because stock in this portfolio tends to be less sensitive to economic fluctuations..

Syftet med detta examensarbete är att undersöka hur travhästar vilka behandlats kirurgiskt vid kolik på UDS 2007-2011 återgår till tävling samt att utvärdera om detta går att göra med hjälp av den omfattande tävlingsdatabas för svenska travhästar som finns tillgänglig på www.travsport.se. Hästarna till studien har identifierats ur journalsystemet som används på Hästkliniken UDS. För de hästar som stämde in på uppsatta kriterier för deltagande i studien valdes även en representativ kontrollgrupp av hästar ut, utformad att vara så lika den opererade gruppen som möjligt vid tidpunkten precis före operationen. De båda grupperna har sedan jämförts med avseende på prestation. Statistik på antal starter, insprungna pengar per start och totalt insprungna pengar har för alla hästar inhämtats ur tävlingsdatabasen. Totalt ingår sex opererade och 12 kontrollhästar i studien, av de sex opererade har fem startat under uppföljningsperioden och alla referenshästar har startat.

Sammanfattning  Datum:                               2011-01-14 Kurs:                                  Kandidatuppsats i företagsekonomi Lärosäte:                           Mälardalens högskola Akademi:                           Akademin för hållbar samhälls- och teknikutveckling Handledare:                      Lennart Bogg Examinator:                      Cecilia Lindh Författare:                         Wilhelm Moby och Pia Robson Nyckelord:                         Lean Production, implementering, effekter. Titel:                                   Det lutar mot Lean ? en jämförelse av arbetet med- och effekterna av Lean Production på ASSA AB med teoretiska kunskaper inom ämnesområdet.                                           Problemfrågor:                 Hur har ASSA AB gått tillväga för att införa Lean Production och vilka faktorer har varit avgörande?Vilka effekter har införandet av Lean Production givit verksamheten? Syfte:                                 Den här studien ämnar undersöka och sedan jämföra arbetet med- och effekterna av Lean Production hos ASSA AB med teoretiska kunskaper inom ämnesområdet.   Metod:                               Metoden är av kvalitativ karaktär och med hjälp av djupare litteraturstudier och en semi-strukturerad intervju ska studiens syfte uppfyllas. Slutsatser:    Resultatet av den här studien kan sammanfattas med att det som framkommit i den empiriska undersökningen mycket väl överrensstämmer med det som sägs i den teoretiska referensramen. ASSA AB har först infört verktygen 5S och standardiserat arbetssätt, vilket möjliggjort införandet av andra verktyg såsom kanban. Inget av detta hade dock varit möjligt med ett lyckat resultat om inte personalen först blivit utbildade och en leankultur skapats.

At the farm Fride, in Lojsta at the Southern part of Gotland, my family runs a pig production with 80 part-integrated sows in a ?Familybox-system?. The main parts of the facilities are from the early 90´s and have done their job. The production results have the last years decreased because of new infections so we have to do something before shifting ownership! This degree thesis is meant to answer the question about which the optimal extension would be today. By studying literature, use my own experience and make lots of calculations, I try to find out different opportunities.

There is a common belief that the arts contain knowledge of creativity that can enrich the business world. Similarly, the arts are in need of additional support from the private sector and know-how of business practices. In short, there is a need for mutual understanding. With my background as a dancer paired with my studies at the Stockholm School of Economics I have taken the challenge of bringing the two worlds closer together. By changing a social system, like an organization, it is possible to get a better understanding of it.

This paper aims to determine what is decisive for localisation of production units when a company engages in offshoring. By performing a case study on Electrolux and comparing the results with theoretical literature we discuss the implications for manufacturing companies in general. To facilitate a structured analysis we have developed a model dividing the localisation decision into five perspectives and four geographical levels. We have found that the determinants of localisation vary depending on the geographical level of the decision process. Since all geographical levels are interconnected, the analysis needed for a decision on all levels simultaneously is very comprehensive.

E-Series 450 is a chainsaw designed by Husqvarna AB to the semi-professional user. Husqvarna is a world leader when it comes to chainsaws, trimmers, lawn mowers and garden tractors. The problem in hand can be addressed by the question. ?How easy can we start a chainsaw? The purposehas been to provide a solution to the question above and give Husqvarna a good base of which they can continue towards a finished product.