This thesis aim to shed a light on how to communicate the individual and subjective feeling of safety in the arena of public events such as music- and cultural festivals with the safety-project on Peace & Love festival in Borlänge, Sweden as a practical example. Earlier research has mainly been focusing on the objective side of safety on these kind of events. Peace & Love decided to put a larger focus on the safety for the festival in 2012, and Trygghetsprojektet was started. By looking at how the project is formed this study wants to show how organisations can communicate a feeling of being safe to the audience to enable them to fully enjoy an event.The main questions asked in this study is: How can a feeling of being safe be communicated to a large number of people by focused acts of communication at a festival? How does the head of safety and the safety coordinator work with communicating a feeling of being safe to the audience? How does these communication acts relate to earlier research on mass communication? The results shows that communication within the organisation and with its partners is of great importance for the outcomes of the project and that communication of the feeling of being safe is much greater then the hands-on communication of words.

Research has concluded that meaningless differentiation with trivial attributes sometimes can be a successful strategy. However, the effect varies with respect to certain aspects such as the price of the product and the decision context. How the characteristics of the consumer influence the effect of trivial attributes has until now been unknown. This thesis investigates how the consumer?s level of knowledge and personal involvement influence the effects of trivial attributes on product preferences and product attitudes.

Background: Every year, more than 1000 cases of adverse events are reported in the Swedish health care system. These adverse events cost approximately 240 million Swedish kronor each year. By explaining the factors that cause nurses to make mistakes when they have too great a workload, it is hoped the awareness of health care staff will increase. Aim: To perform a literature review which describes factors that can endanger patient safety when nurses experience too great a workload. Method: A systematic literature review encompassing both quantitative and qualitative material.

This graduate thesis is engaged with perceived safety and "safe making" design in public places. Despite the fact that we have never been as safe, questions of safety get more attention than ever in today?s society. Public demands for safer and more secure environments and low levels of experienced feelings of safety indicate problems in society that can shrink people's usage of public places as well as their quality of life. Through methodical exaggeration of danger and legislation of laws, the state creates a situation that in different respect work to overprotect the citizens, who are not unlikely to experience feelings of being unsafe at the same time that the actual safety is to big. An expansion of protection against fear can unlike what was first intended decrease the experience of safety.

This degree projekt deals with Skanska´s safety at the construction site with focus on personal safety equipment. The purpose of this dissertation is to examine how the rules of personal safety equipment are applied and experienced at Skanska´s construction sites.In October 2004 Skanska started a projekt to make the construction sites more safe. With use of a questionnaire we have made a survey at different construction sites. 80 questionaires have been handed out to Skanska´s employees in the southeast region. While they were handed out we conrolled if the employees at Skanska´s construction sites used head protection, easy visible clothing, safety shoes and identification cards.The result of the survey shows how the rules are applied.

This paper, Personal safety when working with weather encapsulation constructions, is focused on weather encapsulation constructions and how the absence of Swedish standards and regulations is affecting the safety for the workers. The usage of weather encapsulation construction is increasing in Sweden therefore the needs for standards and regulations are becoming more and more urgent. The risks involving the rising and the demolition of the weather encapsulation construction and when the construction is transported along its rails are treated in the paper. Since there are no regulations companies have had to solve the safety issues without instructions, the paper regards how the companies have solved this problem without the support of formal institutions..

This report is a bachelor thesis work in the field of product development and design. The assignment has been to develop a solution for roof racks, normally used for cars, to fit on the open trailer models FS1425 and Alugance. The project was implemented by Johan Andersson and Victor Karlsson, students at the Mechanical Engineering program with a focus on product development and design at Jo?nko?ping?s school of Engineering, in spring 2012.The client wants to use transport solutions in the same way as roof racks on cars. The user of such a product is assumed to desire simplicity, safety and an attractive design with an appealing price, which has been a challenge during the thesis work.Pre-studies have been conducted to examine the potential competitors and gain knowledge in the research area.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

The aim of this report has been to investigate the use of electricity energy before and after a conversion of foodservice. The ambition was also to highlight the food safety and the retention of nutrients in relation to the conversion. The methods being used were qualitative interviews, case studies, study visits and literature. The equipment and the use of energy was the same in 2008 as in 2011 for hot-holding of the tested component, sauce with ham. The chilled system used more than three times the energy and cost for one portion than one portion in the hot-hold system.

Workplace accidents in Sweden have in recent years increased. Companies are at the same time putting a greater emphasis on preventing accidents and inform about safety and risks. Therefore there is a need to know how to visualize this safety information. This study is based on a part of a project proposed by the industrial company AB Wahlquists Verkstäder, in which they want to visualize their safety information for new employees and existing staff, and also for temporary contractors and apprentices. The purpose of this study is to see what is required of the visualization of safety information and what guidelines that should be followed.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

Since Sweden joined the European Union all Swedish fruit and vegetables are classified according to EU Quality standards. One important function is the product description and how it can facilitate the trade; for example in better comparing prices and also to guarantee the quality of the product. This quality standards or product descriptions are written as words of an Act and obligatory for all countries that has joined the EU. It?s often a demand from the customers to be certificated according to some of many certificating systems. One example is the common worldwide GLOBAL GAP-certification system created by the organisation EUREP which represents the leading European retail traders.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

DV01 is a bicycle concept aimed towards a contemporary target group, that considers the bicycle to be both a convenient means of transportation and a product with a high aesthetical value. A bicycle is for many people something that you attach to your own personal style, were not only the bicycles function but also its appearance plays a crucial role. It is also a product that consists of many different components and parts, which all affect the overall impression. The focus of the project has therefore been about finding a balance in the design. When form and function interact in a successful symbiosis, the result is often that the product may last longer and are more loved by its users..

The purpose of this study was to try to understand the Swedish population regarding the perceptions of the Swedish welfare system, based on the reactions that occurred after Sweden's Prime Minister Fredrik Reinfeldt's statement about raising the retirement age. Our results demonstrate that the reactions on changes in the pension system in fact rooted in a safety factor and not the change in the pension system itself, through which the Swedish welfare system acts as a safety net for the population. Further the results shows that these safety factors create a form of egoism. With an interaction between empiricism and theory, where the starting point of the material was of an inductive approach, the material abstracted into different levels from which the result emerged. The focus of this study lies in the understanding of how human beings act according to one's need for security in major changes, which may be of importance to a comprehensive understanding of changes in social structures..