The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

This paper aims to explore the possibility of reading the Temple cleansing stories of John and Mark through Bruce J Malina?s honor/shame model, as E. Randolph Richards do. The analysis searches in John?s and Mark?s Temple cleansings for the presence of the notions of honor and shame, as Malina uses those concepts in his model.

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.

This essay is about the risks of reporting science through media. We have exemplified the problems with the alarm about acryl amide that came in 2002 through the diffusionist model. From the beginning it was a debate about how dangerous acryl amide is to us humans, but later on it developed to be a debate about whoever did wrong in the intermediation, because later on it came out that acryl amide maybe didn?t cause cancer at all and the scientists didn?t know how to prove if it did or didn?t. In our essay we have based our theories about how the diffiusionist model often is inadequate, with theorists as Stuart Allan, Anders Ekström and Dorothy Nelkin..

The purpose of this investigation is to come across the associations of consumers who are being exposed to a brand extension from a different product category. Moreover, our aim is to contribute to the knowledge of how consumers respond to these extended products, by investigating the influence of the parent brand. To fulfill our purpose, this study was conducted through qualitative interviews with consumers. In order to carry out our investigation and analyze our findings the following theoretical framework has been used: Customer-based equity, Parent brand affect and Perceived fit. Our data was collected through ten semi-structured interviews including consumers of Fiat and Marlboro brand extensions.

To explore greatly varied opinion between player and reviewer, in relation to new products in ongoing digital game series, an analytic perspective is suggested, that takes the entire game series into account, instead of analyzing games (who are part of a series) as individual productions. This is explored further by introducing a model to support this perspective, based on the game theories by Katie Salen and Eric Zimmerman, as well as Gordon Calleja. This model and chosen perspective is applied against three separate cases to see whether or not it can give insight into the approach of players (of continuing game series) and the differing opinions of players and reviewers..

Due to a constantly increasing competitive pressure it is of great importance to constantly strive for improvements in order to gain competitive advantages. Lean Production is a concept that has been introduced with the aim to minimize waste and increase profitability. The purpose of this report is therefore to investigate how to perform effective planning according to the principles of Lean Production, in companys with customer exclusive products, through a case study at Sandvik Mining and Construction (SMC), and to investigate how SMC kan improve their planning of drifting rods at the production unit in Sandviken.The study started by creating a theoretical framework, to describe the subject planning and planning based on Lean Production. This frame work constituted the base for the case study which took place at Sandvik Mining and Construction, and also for the model and planning tool that has been introduced.The result of the study is partly a general model with factors that contribute to a more effective planning. These factors has beed identifed as SMED, which focuses on reducing set up times and in the end to facilitate the planning.

This master thesis was performed at Scania Research & Development. The given mission was to see where the department Systems Development should focus to improve their development work. Thus the purpose was to map the product development processes in which the department works today and within them identify improvements. To fulfil the purpose a theoretical study of relevant terms, such as improvement work, product development and processes, initially was formed. The mapping method used is called "walk trough" and meant to let the people working in the processes be guides in their own process.

Mosquitoes are found in extremely large numbers in the lower parts of the River Dalälven. In the year 2000 the mosquito nuisance was especially high, resulting in foundation of the Biological mosquito control project. Since 2001 mosquito larvae are controlled by using a biological pesticide BTI (Bacillus thuringiensis ssp israelensis). The mosquito fauna in the area is dominated by flood water mosquitoes, a group of mosquitoes that are very aggressive and form new generations of mosquitoes during every single flooding event during the summer. To be able to efficiently control the mosquitoes it is essential to know the extension and locality of the flooding.

Simulation of different systems can be done using a graphical model description of the system based on block diagrams. The simulation software Matlab/Simulink offers a lot of possibilities to describe a huge number of systems, which can be linear as well as nonlinear. The simulation using Matlab/Simulink is done by integration based on different kinds of numerical methods.When nonlinear Simulink-models are simulated, it is often interesting to apply a Kalman filter to handle the noise that may occur within the process as well as corrupting the measurement. However, application of such a filter leads to an extensive time-consumption despite using fast computers. The reason is that the existing Matlab functions are not constructed for time optimal evaluation.

The forest industry is one of the most important industry branches in Sweden. Since the demand of high precision wood deliveries has increased, the demand on a well constructed forest road net also has increased. A good road net gives the wood-supplier competition advantages and also increases its service level towards its customers, lumber-mills and pulp-mills. In some parts of Norrbotten, the road net is still insufficient and not yet built out enough, and that is why it is important to know how to act and where to improve the road net in these areas. The purpose of this thesis was to create a work-model for long term road planning in areas with no road net or a not yet complete road net. The model has been created in an ArcGis environment, where a long chain of tools has been tied together with the program ?Model builder?.

Vobbla Racing is a racing team who has an online sales department that is in need of an upgrade to be more efficient and easier to use. Before this study their present homepage was anything but structured. The products were sorted in an illogical order which made it difficult for the customer to find a wanted product. The customer had to summarize the products, transport sums and other costs. The order had to be e-mailed or phoned in to Vobbla Racing Produkter.

Energy costs are high nowadays and that is the reason why the energy consumption needs to become as small as possible in most of the companies. To accomplish the small energy usage one needs to map the energy flows, study them and monitor them. One method that can be used for this is energy balance calculation. The method gives an opportunity to separate different energy flows and see where each flow is heading. There is also another method which is more advanced than energy balance calculation.

This report is the result of a thesis as been implemented during the spring term 2009 atthe University of Gävle.The company Bruks produces mobile chippers which are used for chipping loggingslash, roundwood and parts of trees. The chipper is powered by a separate diesel engineand the chipper can be assembled on trucks, trailers or some other carrier vehicles.When the chip has passed the chipper drum, the chip is collected in an integrated binwhich is mounted on the vehicles frame with dumping yokes. When these dumpingyokes were designed they were probably created with large material dimensions. Theaim with the degree project is hence to study the strengths of materials and, if possible,to suggest an arrangement that can decrease the total weight on the dumping yoke onBruks´ mobile chippers 805 CT.The CAD-program Pro/ENGINEER was used during the project for outlining the 2Ddrawings,as distributed of constructors on Bruks, to solid 3D-parts. The three-dimensionalassembly from Pro/ENGINEER was transferred to Pro/MECHANICA.

The purpose of this thesis is to contribute to a further understanding of the complexity in green consumer behaviour by examining how and why individuals priorities values, personal norms and identity in green consumer behaviour. The thesis employs a qualitative approach with an abductive strategy. The empirical data was produced through in-depth interviews with green consumers. Based upon the empirical findings and theoretical concepts, a conceptual model was introduced to illustrate how consumers prioritise between several values when assessing green products. The prioritisation is dependent on internalised values as well as the product function and the need that the consumer seeks fulfilled.