The purpose of the study is to explain whether the introduction of a new and different brand by means of a brand extension affects consumers? perceptions of the product category that the brand is launched in. An experiment was carried out to study the following aspects: associations and constellations of associations to the product category, interest, perceived variation, and the perceived similarity with the category from which the brands were extended. In the study, brand breadth in the original product category was used as moderating variable. Aspects found to be affected by the brand extensions were associations to the product category, the constellations of these associations and the perceived similarity with the category from which the brands were extended.

The thesis strives to answer the question whether there are any differences between how young customers, in comparison with older, are affected by brands when buying different products. The purpose is to get a clearer idea about the brands' importance in the future and in that way also to give guidance to companies about how to best market themselves and there products.To answer the question, an experiment was conducted with 480 respondents taking a survey where they had to rate a product after reading a short text about it. Some of the texts stated that a specific brand was behind the product while some said the product was produced by an unknown brand.The result of the study was that young people showed a greater propensity of rating products with a brand higher than products without brands, in comparison with the older respondents. This gives reason to believe that brands progressively will become an even more important tool for marketers and an unmatched asset for companies in the future..

Project Safe Sleeping Position (SSP) contains all parts in a product development phase. The project comprises the whole cycle from idea to a complete product where all aspects are included. The scope is to develop an innovative solution for a common known problem and work with all parts within the man-machine-way. The result is an inflatable product which secures a child in the correct way for the seatbelt to work properly in the rearseat of a car. Ergonomics, technical extent, usability, design, construction, product solutions and market potential are some of all parts witch the project includes.

The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

This report is the concluding part of the course national minorities, main focus on design, at Luleå University of Technology spring 2007. The purpose of this written examination is to produce a prototype to a product, which can be used both when marketing Kiruna as a student municipality and when recruiting students to the study programmes Kiruna offers. The product has been produced through systematic problem solving, where methods to fix the problem, gather facts, examine and come to a solution have been used. The product should in one way or another get the student to think of Kiruna as a student municipality and it should also appeal to the target group ? the students.

Förstainstansrättens dom i målet Microsoft mot Kommissionen har gett upphov tillmånga konkurrensrättsliga frågor, bl.a. gällande Microsofts tying av WindowsMedia Player till sitt operativsystem Windows. Denna uppsats för framförallt ettresonemang kring frågan om huruvida de ?traditionella? EG-rättsliga metodersom idag används vid bedömningen av kopplingsförbehåll (tying) är förlegade närdessa ska appliceras på en ?ny? produkt som mjukvara. En analys av konkurrensrättsligdoktrin och rättspraxis visar att Microsoftdomen i delen vad gäller tying ärkonsekvent gentemot den praxis som etablerats på området genom målen T-30/89Hilti AG mot Kommissionen samt C-333/94 P Tetra Pak International SA motKommissionen.

På uppdrag av Volvo Lastvagnar har detta examensarbete genomförts under våren 2013 för att undersöka potentialer av energibesparande åtgärder i måleriet. Syftet med uppdraget var att utveckla en energimodell över måleriet i byggnad UD, där användaren kan testa olika driftparametrar för att se måleriets potentiella besparingar ur en ekonomisk och energimässig synvinkel. Energimodellen byggdes i Microsoft Excel och arbetet innefattar tydliga redogörelser över de energikrävande processerna, samt över de data som ligger till grund för modellens beräkningar. Data över 2012 års driftsituation har använts som grunddata i modellen och analyser av dessa tyder på att stora energibesparande åtgärder är möjliga.De lastbilshytter som lackeras i Line 3 är de i särklass dyraste, då Line 3 i dagsläget används väldigt ineffektivt. Av den maximala kapaciteten på 12,9 hytter per timme, använder Line 3 endast mellan 8 % och 15 %. Modelleringar visar att en reduktion av drifttiden på Line 3 från ca 95 timmar per vecka till 40 timmar per vecka skulle medföra en minskad driftkostnad på en dryg miljon kronor per år.

Sammanfattning Syftet med examensarbetet är att undersöka skillnaderna mellan en fysisk och en on-line konferens för att se om de kompletterar varandra eller kan ersätta varandra. Uppsatsen är baserad på The Conference ? en mediakonferens av Media Evolution i Malmö. För att uppnå syftet ställdes en huvudfråga och två underfrågor: Är det fysiska mötet på The Conference och on-line mötet på internet kompletterande eller ersätter de varandra?? Underfrågorna är: Vad vill arrangören att deltagaren ska få ut av The Conference på plats ? i förhållande till en konferens on-line? Hur används sociala medier för att knyta ihop on-line och fysiska möten för The Conference? Det teoretiska ramverket för uppsatsen består av teorier och artiklar om interaktion fysiskt och on-line.

This study explores how consumers' attitudes and intentions-to-buy towards an atypical product can be influenced by the presentation of the product and consumers shopping goals. Moreover, another product, which was shown together with the atypical piece, was analyzed in order to investigate context effects. The aim of the study is to provide insights into a rather unexplored subject and help retailers in presenting their assortment in a way which will create a better perception and intention-to-buy towards the assortment. The study was conducted with the help of two studies, the first one aimed to find an atypical item and to see how attitudes could be affected by differences in presentation by comparing it with a typical item within the same category. The second study used the identified atypical piece in order to see the how attitude and intention-to-buy could be altered by presentation and consumer shopping goals.

It is important, for companies operating on a homogeneous product market, to understand and adapt to customer needs. Since coffee is a homogeneous product in food retail it is vital for coffee companies to work extensively with differentiation and the fierce competition. The prevailing homogenity makes it difficult for companies to develop the product itself and must therefore work to create added value to the product.The purpose of this thesis is to carry out a study on consumer decision-making when purchasing homogeneous products, and to examine how companies work to strengthen their brand and gain market share in a homogeneous product market. The market that this thesis highlights is the coffee market.To answer the purpose of this thesis the writers have conducted a questionnaire survey regarding consumers? decision-making process and interviewed two marketing managers for two major actors on the coffee market.

The project has been implemented in collaboration with Carl-Johan Lundberg on Deltagruppen Ltd in Jönköping. Problem introduction comes from Carl-Johan's own experience from the hotel sector. The problem that all hotels has is that they sell two products, i e. simple - and double rooms. Persons that travel in companies do not desire always to share bed.Focus in the work is to develop a product that holds together two simple beds and forms double bed, concurrent that it goes that converters to two simple bed without needing to disassemble the product and be done invisible.

This Master Thesis is a product development project that has been carried out in cooperation withLappset Sweden AB.The purpose has been to develop a group of products suited for parks andtraditional playground locations. The specific target area has been courtyards of newly builtresidential areas. (These pieces of open land resemble glades that can be found in the forest,which in Swedish is called ?gläntan? and has given name to the product family). Therefore thedesign should match contemporary architecture.

SammanfattningSyfte och frågeställningarPeabody Developmental Motor Scale 2 (PDMS-2) är ett motoriskt test för barn upp till sex års ålder. Syftet med denna studie var att undersöka genomförbarheten hos Catch And Run On LINE (On Line), ett nytt grovmotoriskt test för förskolebarn, samt att utvärdera överensstämmelsen (concurrent validity) mellan On Line och den grovmotoriska delen av PDMS-2. Frågeställningarna som ställdes var hur den totala poängen överensstämmer mellan On Line och PDMS-2 och hur lång tid det tog att sammanställa resultatet av de två olika grovmotoriska bedömningarna.MetodOn Line utformades som en kortare variant av PDMS-2. Alla barn (n=26) som remitterades till sjukgymnastiken på Sachsska barn- och ungdomssjukhuset för en grovmotorisk bedömning och som besökte författaren där under 4 månader erbjöds delta i studien om de hade börjat gå, men inte hade fyllt 6 år. Barnet bedömdes vid ett tillfälle.

The catchphrase this project has been; the boundaries between ornamentation and improvisation are fluid.My aim was to focus on my work process, giving me the space and time so develop my design further regarding shape, color and combination of different styles in patterns.This is an explorative project where patterns were created without a predetermined product of which the patterns would be applied. In a later stage the character of the pattern determined which product that would be most suitable for application.It resulted in a collection of patterns for wallpaper and clothing. The motives are foxes, geometrical shapes and squares from a notebook. These motives form an ornamental expression in the patterns with the purpose of embellishment and therefore increase the emotional value of the product..

This thesis is the result of the class Examensarbete, 15 credits of the mechanical engineering program at Halmstad University. The class represents the final part of the program with the aim to attain a Bachelor of Science. It´s a project made during the spring 2014 in collaboration with Alutrade AB and ScanBox Thermo Products AB.The assignment is to develop a new transportation trolley for ScanBox. The aim is to complement their range with a product that opens up to new markets. That set new demands for materials and also manufacturing- and assembly methods.