The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

In the ever increasing media clutter it is hard for marketers to make their products stand out. New ways of reaching consumers are constantly arising. This study seeks to further investigate the phenomenon known as product placement, delimited to movies/television. By conducting an experiment we tested whether different presumptions matters for what effect a product placement will have on attitude and if these could be affected. We also looked at if the level of product integration effect attitude and realism enhancement.

The purpose with this project has been to investigate how a company`s marketing and product development can adapt to a specific target group..

PurposeThe purpose of this study is to investigate whether a combination of product placement and traditional advertising can enhance the company's marketing. We perform this study because we believe that the consumers consider traditional marketing in many cases obsolete.TheoryThe study?s theory consists of topics and terms of product placement, traditional marketing, branding and communications. Theories used in this study were the basis to answer the study's research question using empirical data gathered during the study.MethodThe study has a deductive approach with a qualitative focus, therefore, the study is based on existing research, which was later to use for the data extracted from the interviews. The approach is going to show differences and similarities between how it looks in reality versus theory.ConclusionThe results of this study show that product placement can increase the efficiency of traditional marketing.

The use of thin and attractive models to promote companies' products is widespread among marketers. This is true even for companies whose products have little or no association with beauty or body weight. As the proportion of overweight people continues to grow in many developed countries the ideals used by marketers to attract customers strays further away from the actual attributes of the customers themselves. What is little understood is what effect overweight has on the efficiency of the product promoter. Some limited research has studied how the efficiency of the product promoters in printed advertisements is affected by the existence of congruence between the product promoter and the product itself.

Many product launches are postponed today, however very little research regarding to customer responses to such events has been carried out. The purpose of this paper is to investigate how people react to a postponed product launch. An experimental study of responses to a postponed launch of a mobile phone, a mineral water and a music album is used to investigate customer reactions. The respondents exposed to the postponed launch showed a higher value of reactance. This reactance affects the attitude, purchase intention and perceived quality of the product in a negative way.

Companies become more and more aware of the added values of the packaging. A well chosen and developed packaging can reduce the costs for the companies through reduced costs for transports, reduced quantity of waste and discards and increased goodwill for example. The companies? costs for salaries can also be reduced due to the increased packaging handling efficiency and the reduced costs for sick leave, reduced work capacity and rehabilitation etc. that can arise when handling poorly developed products and packaging.

This Master of Science thesis is conducted at the faculty Integrated Product Development at theRoyal Institute of Technology and in cooperation with EssNet Interactive AB, both situated inStockholm. In the report the final results and the road to get there is described as well as thedesign process and how the process is used to obtain the goal of this thesis.The author of this thesis has developed the design and the function of an interactive videoterminal (IVT) and by using semantics created an encouraging gaming design. The projectspurpose was to change the anonymous withheld shape and produce an experience of gamingmachine that has been absent. The work was aimed to answer the question: How does oneproceed to develop the IVT and by using semantics creating an understanding of gamingmachine?In general the author wants to show that small changes, with the help of design and its signals,can completely change the overall picture of a product.

Purpose;the purpose of this study is to investigate whether a product ad observer's purchase intention, perception of product quality, brand image perception and price perception is affected depending on the size of the text that was used in the ad to communicate the product price.Methodology;the study was conducted using a quantitative method through a survey. The implementation of the study has been done by using three variants of the same suit ad where the three different variants have been manipulated on the text size on the price information, by reduced / increased the text size. The implementation has also been carried out using two different ad sender, with three ads for each sender.Result and conclusion;the text size on the price of a product ad mainly affects the observer's price and quality perception, where the small text will have a positive effect on quality perception and a negative effect on the quality perception. Even brand image changes depending on the text size where small text will have a positive effect..

The pace of product development is increasing. It is important to keep high quality in theproducts even though the time for product development decreases. Those companies whichcan utilize previous experiences are positioned with a significant competitive advantage. ToABB Robotics it has become evident that the knowledge transfer process within the productdevelopment department is inadequate. This study was a result and an attempt to address thisunsatisfactory insight.

What is customer satisfaction and when does it occur? Microsoft?s customers and partners state that product quality is the strongest driver for customer satisfaction. To be able to increase customer satisfaction Microsoft must know how their partners and customers define product quality. This study investigates product quality in general terms but also in the context of the product Microsoft Dynamics CRM in addition to experience from some of Microsoft?s customers and partners.

Background: The consumers of today have the possibility to choose from a wide range of products and services. Consequently, the ability to differentiate the products is essential for the brand owners. If a brand owner does not manage to differentiate its product, it can be difficult to make the consumers realise the benefits of the product and convince them to buy it. One way to differentiate the product is to create a distinguished brand identity. However, it is not enough to create a strong brand identity, the brand owner must also be capable of communicating the brand identity successfully.

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO.

This degree project concludes the Innovation and Design Engineering programme at Karlstad University. The project was carried out by David Brocker, Erik Hallberg and Andreas Hertzman during the spring of 2006 and corresponded to 15 weeks of work per student. Assigner was Martin Larsson at Arexor and instructor at Karlstad University was Monica Jakobsson.Arexor has a patent to a construction of an electrical skirting board with moveable wall sockets, called Electrical Track System. The lowest parts of the interior walls along the floor are today almost always covered by a conventional skirting board. Arexors patented product replaces that with the possibility to move and increase the number of wall sockets by choice along an electrical skirting board.

Syfte: Syfte med uppsatsen är att öka vår kunskap om product displacement samt att utreda den påverkan product displacement har på mottagaren sett ur ett marknadsföringsperspektiv. Pararellt undersöks om fenomenet kan vara en fördel eller nackdel i marknadskommunikationen. Utgångspunkten i utredningen är att varumärkesinnehavare själva använder sig av product displacement.Metod: Denna studie har genomförts med en kvalitativ metod och induktiv ansats. Metodvalet har sin utgångspunkt i den bristande teorin då fenomenet product displacement är ett nytt begrepp sett ur ett marknadsföringsperspektiv. Undersökningen bygger på tjugo kvalitativa intervjuer med mottagare av product displacement samt två respondenter med yrkesanknytning inom marknadsföring.Avgränsningar: Denna uppsats behandlar endast product displacements effekter på mottagaren som i vårt fall är begränsat till studenter i ålder 20-25 år.