The report is a project in cooperation with the Swedish toy company Playsam. The assignment was to design a new toy to their range of products, a pull along toy in shape of a snail with a mechanical function. The research phase contains studies and analysis of the company, its identity, product range and its customers. The research phase includes all the information needed to complete the project. A number of concepts were presented for evaluation by the company.

The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

This diploma work has been conducted for the consulting company Ramböll inUppsala, Sweden with the purpose to perform a study with the calculation programFEM Design 9.0 made by Strusoft. The aim has been to find out if it is possible to gainadvantage by utilizing more advanced 3D software for design calculations, instead ofthe traditional methods currently used in construction works.The method of approach has been to model an existing warehouse building with theprogram FEM Design, and then compare the results with those attained with FrameAnalysis and hand calculations. These results are then analyzed. An evaluation is maderegarding to what benefits can be achieved using a more advanced 3D-model.The results of the study show that the differences between the methods are not ofany significance with regard to the design of the steel frame. However in morecomplex materials such as reinforced concrete, the differences become more notable.The conclusions drawn by the authors of this study into FEM Design are that theeducation requirements of the program are higher than for simpler programs, whosepurpose are solving predetermined problems.

Examensarbetets problemområde återfinns i den tidiga delen inom informationssystemutveckling. Denna utvecklingsfas, kallad Requirements Engineering (RE), innefattar aktiviteter för att förstå, dokumentera och validera de behov och krav som föreligger för ett framtida informationssystem. RE är en avgörande aktivitet i processen att utveckla ett informationssystem som tillfredsställer användare och kunders förväntningar och behov.De olika intressenterna som är involverade i RE-processen har olika roller, bakgrund och kunskaper. Av denna anledning föreligger olika problem och möjligheter med avseende på intressenterna. I examensarbetet utreds vilka dessa möjligheter och problem kan vara.

This Bachelor of Science thesis was carried out at Metso Panelboard AB, located in Sundsvall, Sweden. The work lasted for 10 weeks and began at the end of February 2007. Metso Panelboard is one of the leading suppliers of complete lines, single machines, engineering knowledge and after-market services to the fibreboard industries. The task involved building a 3D-model of a dryer cyclone in the CAD-program Pro/ENGINEER. A dryer cyclone is the part where the tree fibres are dried in the process of manufacturing fibreboards. Currently, it takes about two weeks to draw a dryer cyclone. By creating a 3D-model of it, which should have the functionality to be generated to different sizes, the goal is to decrease the drawing time to about 20 hours and to increase the quality of the work. This report includes the fundamental theories behind the manufacturing of fibreboards with focus on the dryer cyclone.

Denna rapport redovisar den process som utvecklingen av OTWs nya webbplats har inneburit. Jag har arbetet med att skapa en ny design av deras nuvarande webbplats där syftet har varit att skapa en webbplats där man presenterar sig själva på ett bra sätt och ställer mindre krav på redaktionellt innehåll samtidigt som man följer konventioner för branschen och målgruppen. I utvecklingen av webbplatsen anpassar jag mig efter rådande designprinciper och riktlinjer för användbarhet så att webbplatsen ska bli så lätt att använda som möjligt. Utvecklingen av prototypen har skett i mjukvaruprogrammet Axure RP. Resultatet av projektet är två interaktiva digitala prototyper i form av en mobil version samt en desktopversion.

For research purposes Saab has developed a generic mathematical model denoted VEGAS of an aircraft with a configuration similar to JAS 39 Gripen. Today parts of Gripen backup control system are used also for VEGAS making the system subject to both corporate and defense secrecy. The main objective of this master thesis is to design, verify and implement public pitch axis flight control system for VEGAS. Furthermore, simplifications regarding the design process is to be examined. Design of pitch axis flight control system for the entire flight envelope has been carried out.

The goals of this Bachelors? Thesis were to establish the production loss through the VTIS1 Pasteur at Arla Foods Linköping dairy and then suggest simple but effective solutions to minimize the losses for each production run. If the timeframe allowed it, some of the solutions would be implemented and tested in full production to determine their impact on economic and environmental savings.The very first step of this project was to establish the statistics over what losses there is in the production pipeline through VTIS1, from milk and powders in mixer tanks to finished and packed products in cold storage. Then, when knowing how much product was actually lost and where, those bottlenecks could be pinpointed and examined more closely. At this stage the focus was switched, from the otherwise complicated and broad manufacturing process, to the VTIS1-aggregate, since early data indicated there were quite substantial losses there.In conjunction with this project Arla Foods purchased an absorption photometer-measuring device (OPTEK AS16) that could be inserted straight into the product stream out of VTIS1, allowing real time measurements of its optical density.

Bakgrund: I konkurrens om morgondagens konsument kommer sannolikt materiella värden inte räcka till. Företag måste också kunna erbjuda immateriella värden genom upplevelser. Ett sätt att göra detta är via produktens design. Den företagsekonomiska relevansen understyrks ytterligare av det faktum att lite forskning finns kring immateriellt värdeskapande och design. Syfte: Syftet med uppsatsen är att bidra med förståelse för hur design kan tillföra immateriella värden till en produkt.

The purpose of this report is to study the relationship between the rescue service fire prevention activities and the number of arson fires in schools. An objective of the project is also to investi-gate the need of developing national methods for fire prevention. The results are based on a questionnaire study among 35 fire departments and further interviews with five of them. The results indicate that there is a relationship between the rescue service fire prevention activities and the number of arson fires in schools. The relationship is positive in the sense that arson fires in schools decrease with increasing prevention activities.

The project this report is handling has been implemented on NBB, Nordisk Bilbelysning AB in Linköping. The company produces and develops lightning and searchlights for all types of vehicles. Lately NBB´s supplier of electronics, OSRAM, has developed a mercuryfree xenon lightsource. Mercury is one of the most hazardous environmental waste and to get rid of the mercury entirely in the lightsource is a big step that means alot for the environment.This lightsource will be placed in one of NBB´s worksearchlights called My, and will be sold as an alternative to mercurycontaining searchlights. NBB wants to put an environmental label on this product and they want to have essential information about the product that is needed for the production.

Purpose: The aim of this thesis is to examine how word of mouth and buzz marketing affects Uppsala´s businessstudents attitudes towards Red Bull. To solve this purpose we intend to answer some underlying questions.Theory: We have used relevant theories within word of mouth, buzz marketing and consumer behaviour. Our thesis will bring up the essential parts within these three different theories that we believe are relevant to our purpose.Method: In this thesis we have used both quantitative and qualitative methods such as interviews and questionnaires. The questionnaires will be handed out at Economicum at Uppsala University.Empirical study: This part is based on our questionnaires handed out to business students at Economicum, but also on our interviews made with employees working for Red Bull.Conclusion: Our empirical study has given us a clear picture of how Red Bull works and use marketing tools to promote their product. Through our questionnaires we have also found out what attitudes consumers has against the brand and the product.

The purpose of this study was to follow a research-oriented design process and to develop a design draft for a digital service that supports users to make more environmentally conscious choises in their everyday life. By following an interaction design process from start to final delivery, the study aims at creating a broad understanding of the process. Therefore, many userrelated activities were implemented in the study: eg. personas, scenarios, sketching and user testing. The project resulted in digital wireframes for an iPhone application using embedded GPS to identify and locate environmentally friendly businesses.

In inhalation anesthesia life-support systems are used to provide gases to the patient and to monitor important parameters. These systems are used in dynamic and stressful situations where the information-load on the operators often is significant. This thesis presents a design concept of an anesthetic system. The design goal has been to keep the information-load on the operator low with the objective to minimize confusion and error.A number of contextual inquiries were made in the operating room during surgery at four hospitals in Sweden. The goal was to understand the actual use-situations when anesthetic systems are employed.

The aim of this study is to evaluate whether the value of occupant load is over or under estimated when the Swedish general value for department stores, 0,5 person/m2, is used for dimensioning shopping centers. The data that was analyzed derives from seven shopping centers and one department store. A conservative method was used to calculate the occupant load factor. The analysis shows that two groups can be discerned: one group that is characterized by a lower occupant load factor that does not exceed 0,3 person/m2, and one group with a higher occupant load factor. Shopping centers with a higher occupant load factor are located centrally in large urban areas.