Den här uppsatsen speglar ett examensarbete för Färggrossen i Nybro. Ett nytt måleriverktyg, närmare bestämt en lackpensel tas fram för yrkesmålare.Fokus för projektet har legat på användarstudier med hjälp av yrkesmålarna Thomas Molin och Mikael Brandén. Studierna har börjat med observationer utav arbetsprocess och hantering av verktyg, därefter uppföljande tester av skissmodeller.Två serier med skissmodeller tas fram för användarstudier och följs sedan upp med en förprototyp som detaljutvärderas. Resultatet blir ett verktyg med vinklat skaft som ska skapa en flexibel pensel för många olika grepp..

Examensarbetet utfördes självständigt av Cecilia Edlund som studerar på Högskoleingenjörsprogrammet i innovationsteknik och design vid fakulteten för teknik- och naturvetenskap på Karlstads universitet. Arbetet utfördes under vårterminen 2012 och omfattade 22,5hp.  Uppdragsgivaren har varit Nokalux AB som utvecklar och producerar inomhus- samt utomhusbelysning för den professionella marknaden i Norden. Företaget har ett behov av att utöka sitt produktsortiment på utomhusmarknaden. Vilket har resulterat i uppdraget att utveckla en parkarmatur med LED-teknik som ljuskälla.Fokus i examensarbetet har varit förstudien. Detta för att grundligt ta reda på information kring LED och belysningsteknik som anses betydande vid utformning av utomhusarmaturer.

Statistics indicate an increase in online shopping. This indication could result in the loss of safety factors for the customer, for example the possibility to physically examine the product, interact with professional store personnel and try the product before purchase ? factors which all could support the customer in her choice of company and product. The purpose of this study is to increase the theoretical knowledge regarding strategies in the area of trust-development between customers and companies. We have chosen to investigate what strategies web based companies apply and how they are perceived by their customers.

Bakgrund: Produktutvecklingsprocessen har på senare tid kommit att ses som en strategisk aktivitet som är avgörande för företagets överlevnad eftersom produktens utförande och kostnader till stor del fastställs innan tillverkning påbörjas. ?Target Costing? har sitt ursprung från Toyota i Japan och är en metod för strategisk kostnadsstyrning som har vuxit fram för att tidigt styra kostnader. Metoden används för att integrera kostnadsstyrning i produktutvecklingsprocessen i samstämmighet med kundkrav och företagets egna vinstkrav.Syfte: Syftet med studien är att beskriva och analysera hur ?Target Costing? används i produktutvecklingsprocessen på Volvo Construction Equipment i Braås för att ge kunskap till nya potentiella användare.

The goal has been to design a product for unloading and storing small gadgetsin the hallway. The aim has been to facilitate the search for importantsmall objects that people never seem to find when they need them the most.The aim has also been to provide a sense of relief when people enter theirhome, and they can empty their pockets on one spot in a very simple yet orderlymanner. The product would be able to sort out, and make the gadgetsaccessible, take as little space as possible, be easy to use and not be perceivedas heavy and clumsy. The work has been done with close involvement of afocus group consisting of 20 people of different ages and with different occupations.The behavior of the focus group has been observed and test modelshave played a crucial role in advancing the work troughout the project. Theresult is a series of storage products for the wall, of simple shapes which canbe combined together in different ways depending on hallway and the user?sindividual taste or preference..

During the spring semester of 2012 did Petra Hollsten independently a thesis on reducing the environmental impact of capsule for coffee, tea and chocolate. The work was performed at Karlstad University, Faculty of Technology and Science under the Bachelor of Science program in innovation, technology and design. The project's scope is at 22.5 points.The employment for this project is the company Löfbergs Lila AB in Karlstad. Supervisor at the Principal has been Maria Herou Wallner and Sandra Lyxell, product managers. Supervisor at Karlstad University is Monica Jakobsson, lecturer and program leader for innovation and design engineering program.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

This thesis introduces Kongjian Yu?s design approach in terms of industrial heritage conservation in connection to transformation and urban design. The approach is examined respectively on two cases from China and USA. The thesis give a brief introduction to current achievement in conservation research and general profile of industrial conservation practice. Based on case and theory study, Yu?s design approach is carefully applied to an industrial area Nyhamnen in Malmö and a design proposal is produced.

This is a thesis for a Bachelor Degree Project, performed in the subject MechanicalEngineering. The students Roger Malmberg and Simon Hagberg have carried out adesign project on behalf of the recently established company J&D Assisting systems,located in Halmstad.The project consisted in developing J&D's first prototype of a power assisting solutionfor wheelchairs. A power assisted wheelchair combines human power, which is deliveredby the arms through the pushrims, with electrical motors, which are powered by a battery.The power assisted wheelchair is aimed at customers, who have used a regularwheelchair for a long time, but who have become weaker or just need additional powerwhen driving uphill. This kind of wheelchair will provide additional power for users,which will spare their wrists, elbow and shoulders. The product is torque sensor free andinstead it relies on the velocity.

This thesis was conducted at SverigeGrepen in Vänge-Körlinge, Uppsala, Sweden.SverigeGrepen is a family business that develops and manufactures a few different parts of different kinds of products. My task is to come up with a good idea that facilitates the coupling of trailers, i.e. from an idea to a fully functioning prototype. The product is intended for use by all customers for all kinds of trailers. The actual goal of the work is to develop a full prototype that you can install and use in the easiest way possible, a prototype that follows the specifications.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

High heels ? a fashion that has not gone out of style after hundreds of years. Despite their esthetic advantages, high heels become uncomfortable and harmful after repetitive and long term use. With this as a starting point, Huyen Nguyen ? a student at the Innovation Engineering Program at the University of Halmstad ? decided to make a final thesis project. The project goal has been to combine the esthetic advantages of high heels and bring a comfortable solution to the equation.

This thesis describes the design of a tipping trailer, from a company?s demands andrequests to complete manufacturing documentation. The design is developed for thecompany Abexor AB in Östersund that produces tipping trailers. The product issupposed to be used by Abexors customer to transport cargos of different kinds,such as gravel, stone, dirt, etc.The work commenced with a meeting at the company where demands were set.After that a pre-study was conducted to find out what traffic rules were required forthe trailer to be allowed to be driven on roads. Similar products were examined tosee how the trailer could be designed.

A current issue today is to try to implement creative design as a way to solve wicked problems in scientific contexts such as HCI. Since the problems are wicked, they have no given solution which makes the traditional methods inadequate. In these cases, creative design can be an alternative. Creative design is not used in scientific contexts because it is viewed as something unaccountable.In this essay we argue that creative design not necessarily have to be unaccounted. We discuss various views of creative design and translate theory to a practical context.