Abstract Title: A conjoint analysis of packaging attributes. How can the attributes of a product?s packaging best look like to attract the consumer? Authors: Linda Granberg & Helena Niklasson Supervisor: Jan Svanberg Department: School of Management, Blekinge Institute of Technology Course: Bachelor?s thesis in Business Administration, 15 credits Purpose: The purpose is to find out how visual and technical attributes on product packaging affects the consumers tendency to want to buy the product. Method: Conjoint analysis and a quantitative survey. Results: When developing a package for a food product we?ve reached the conclusion that it is most important to have clear product information on it. The consumer wants it to be simple and easy to use, the people under time pressure seeks product with new technology which can save them time..

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

The shooting sport is one of the most widespread sports in the world and it isbeing practice in most countries. Based on their own experiences, in competition -and hobby shooting, the client M4Solutions found a demand and need for ashooting target that is manufactured in Sweden.The purpose of the project has been to develop, with the help of Marcus Walldén,two shooting targets from idea to finished product. These two shooting targets,Plate Rack Target and Dueling Tree, would each be equipped with a mechanicalresetting system but will in the future have the ability to be provided with anelectronic resetting system.The project from the client was divided into two theses. One of these two, writtenby Marcus Walldén, focused on the tripod parts and the overall design work forboth Plate Rack Target and Dueling Tree. The thesis that is presented in thisreport have focused on resetting systems, the design of protective plates and otherperipherals for both shooting targets.This work has primarily been in CAD environment where design, constructionand development has been given free rein.

In most software engineering project, users are only involved in the beginning of the project as a help to design the requirements specification but users can be involved after this phase too, but is it effective to do so? With this report we would like to investigate how effective it is to involve users after the requirements specification has been written and approved. To find out how effective it is to involve the users we try some fast and simple involvement techniques on a quite far gone project. These techniques include ethnographic studies, prototypes and surveys. We also interviewed a couple of people who work with usability and finally delivered a report with our results to them to find out if they found our result relevant.

Övergången från CATIA V4 till CATIA V5 innebär nya möjligheter för konstruktörerna på Scania att arbeta med Knowledge Based Engineering, KBE, för att effektivisera och kvalitets-säkra sitt arbete. Då CATIA V5 är en ny plattform som innehåller verktyg med samlingsnamnet knowledgware, för att bygga in kunskap i modeller ville Scania undersöka potentialen i att arbeta med KBE, och hur detta skulle kunna ske på Scania. Vid traditionell produktutveckling tas en helt ny artikel fram vid behov och ofta innebär detta att arbete som tidigare utförts, görs om igen. Syftet med arbetet är därför att undersöka huruvida KBE i CATIA V5 kan erbjuda möjligheter att återanvända kunskap från tidigare arbete och samtidigt kvalitetssäkra denna, samt utreda vilka knowledgewarelicenser som i så fall kan vara lämpliga för Scania.För att göra detta har en litteraturstudie genomförts för att undersöka vad som har gjorts inom området, och även en intervjustudie har utförts inom R&D på Scania. Vidare har sakkunniga på Linköpings Universitet och Tekniska Högskolan i Jönköping intervjuats.

The gaming market is growing and the number of people, men and women, who play computer games, is also increasing every day. In addition, computer games are also interactive media which leads to the fact that product placement in computer games attracts and is used more frequently by marketers. It is therefore important for marketers and game developers to understand how product placement in computer games affects players' attention and attitude towards the brand or product that is product placed. We therefore examine how product placement in computer games affects players' recall of and attitude towards the brand. The aim is to help companies and game developers to see the effect of product placement in computer games on players and thus product place more efficiently.

Detta arbete ämnar undersöka problem och utmaningar relaterade till design- och produktion av ett tävlingsinriktat spel för gratis utgivning samt utforska potentiella lösningar och designfilosofier genom att påbörja utveckling av ett spel. Problem som uppstår, lösningar som tillämpas och val som görs dokumenteras varpå resultat analyseras. Undersökningen tar upp design av både spelmekaniska och grafiska element samt produktionen av spelet och dess resurser, saker som är viktiga att tänka på och några saker som kan gå fel..

This thesis describes the development of a tank insert for diesel cars, from idea to a prototype. The idea is to design an insert which makes it impossible to refuel petrol in a diesel car. The insert shall be installed in the existing tank opening on diesel cars. The tank insert is designed for the Swedish company SverigeGrepen AB located in Vänge, just outside Uppsala. Their main product is a pitchfork that is ergonomically designed and durable.A pre-study were performed in which information relating to fuel caps, tank openings, petrol- and diesel nozzles were collected.

The project was performed in collaboration with Husqvarna, one of the world?s leading manufacturer in the market of electric outdoor products. The report is a thesis work of a bachelor mechanical engineer program, in the field product development and design.The project is a study of the development opportunities within drive belt for a gear driven gearbox to one of Husqvarnas petrol powered hedge trimmers. A big part of the project was also to find combinations of materials for all components in the gearbox, to reduce weight and maintain or improve the performance of the system. Belt drive was of interest to investigate as an alternative solution to the current design that can reduce wear on the system at a performance test performed in the company before the product is released to market.

Abstract Tutor - Anders Richtnér History - Theories suggest that Lean Product Development strategies dramatically increase a company's performance through enabling faster T-T-M, Quality and Costs of Product Development. Purpose - The purpose of this paper is therefore to investigate whether the implementation of LPD actually affect corporate performance measurements T-T-M, Quality and Cost, in a positive way. Methodology - This Bachelor thesis is an exploratory investigation of the concept of Lean Product Development within a global IT- company, performed through four case studies, interviews and complementing corporate performance data. Findings - With empirical data and subsequent analyzes in mind, we note the following; it is clear that the project that produced the best results, in terms of T-T-M, Quality and Cost, also was the one furthest in the process of implementing Lean Product Development..

This report presents thesis of Liisa Kokkonen in collaboration with Muovikilpi Oy.The project?s goal is to find a new construction for an existing lamp made of acrylic. Form and design retains and the manufacturing occurs at Muovikilpi Oy. The project contains the new construction and manufacturing of the lamp and also a proposition for a set with floor and wall lamp.  The paper gives an outline of acrylic as material and how it reacts with light.

This report examines the industrialization of a newly developed household machine on behalf of Technogarden Engineering Resources in Karlstad, Sweden. The report is a part of the final course in the Bachelor Program in Mechanical Engineering at Karlstad University and takes place in spring 2014.An innovator, an investor and a engineering consultant firm have through collaboration developed a new type of gruel machine. The product is in its final stage of construction and is planned to be manufactured in a production located in Sweden, autumn of 2014.To compete against today?s trend in outsourcing manufacturing to low cost countries for better profitability, the industrialization of the gruel machine must be done with a minimum amount of resources in order to become successful, which also describes the problem of this study. Using pre-study material in form of Lean production literature, visiting a successful production site and gathering data from involved engineers a specification was developed which describes what this industrialization must achieve and which requests can be accomplished.

Purpose: We wish to gain a deep knowledge about product development processes in relation to the aspect of time in companies in highly technological and rapidly changing markets. The purpose is to establish how organizations better can employ time as a resource to make the product development process more efficient. Conclusions: Information we gathered from theory and primary data show that information flow, synchronization and time profit when seeing time in three dimensions are factors which should be reflected in the architecture of a product development process. To illustrate our findings, we decided to create a model..

In the ever increasing media clutter it is hard for marketers to make their products stand out. New ways of reaching consumers are constantly arising. This study seeks to further investigate the phenomenon known as product placement, delimited to movies/television. By conducting an experiment we tested whether different presumptions matters for what effect a product placement will have on attitude and if these could be affected. We also looked at if the level of product integration effect attitude and realism enhancement.

The thesis was done in collaboration with EAB situated in Smålandsstenar. In the initial discussion faze on doing a thesis with them there was a need to analyze and ensure the strength of an existing product, cantilever racks. This included performing FEM calculations on a model and comparing the results with physical tests.EAB has two models of cantilever racks, a light duty and a heavy duty. Within the heavy duty model series there are five product variants that differ in both size and load capacity. We will be working with the product variant with a load capacity of 1000 kg/arm which is the variant that is in the middle of the series.When we started work on the thesis we did a literature study and couldn?t find any well defined methodology that integrates both product development and computer aided design analysis.