The technological progress of the world has had a massive effect on how we communicate with one and other, it also has had an big impact on how companies communicate with their customers and consumers. Today you cannot only communicate a ?promise to your costumers and consumers you also have to ?deliver? what it is you promise. Strategic communication is today not only to market your product but to ensure that your strategic communication is shown even in you innovation, design and product development.  This thesis is conducted in collaboration with No Picnic AB.The purpose of this study was to get an insight in how Swedish companies use their strategic communication. We aim on bringing a new point of view of strategic communication with innovation, design and product development also as a communication channel.

Abstract Title: A conjoint analysis of packaging attributes. How can the attributes of a product?s packaging best look like to attract the consumer? Authors: Linda Granberg & Helena Niklasson Supervisor: Jan Svanberg Department: School of Management, Blekinge Institute of Technology Course: Bachelor?s thesis in Business Administration, 15 credits Purpose: The purpose is to find out how visual and technical attributes on product packaging affects the consumers tendency to want to buy the product. Method: Conjoint analysis and a quantitative survey. Results: When developing a package for a food product we?ve reached the conclusion that it is most important to have clear product information on it.

Webbaserat Tidrapporteringsystem.

Användning av mjukvaruverktyg när reverse engineering utförs är ett måste för att få ett användbart resultat enligt Hainaut (2002). Kudrass m fl (1997) visar på brister som kan uppstå när mjukvaruverktyg används. Gemensamt för de forskare som har studerats i detta arbete är att de hävdar att företag saknar kunskap för att utföra reverse engineering med mjukvaruverktyg. Har forskarna rätt i att det saknas kunskap eller har företagen mer kunskap än vad forskarna tror? Då dessa forskare har en klar koppling till tillverkning av mjukvaruverktyg så är eventuellt inte deras påstående opartiska och därför är det intressant att se om deras påstående stämmer med verkligheten.

Studies show that activity based costing (ABC) is not widespread in practice even though it has been present in the academic world since the 80's. This thesis examines the reasons for the discrepancy between theory and practice through a case study of a Swedish manufacturing company. The intension is to answer the question of what contributes to the choice of precision in product costing.We found arguments for increasing precision in product costing but not to the extent of a full-scale ABC implementation. The company's estimation of the value of increased precision. In the study three company unique factors were isolated that affected the company's estimation of value; drifting purpose of product costing, historical use of product costing and knowledge about product costing..

Purpose: The purpose of our thesis is to analyze the application of models from product branding on job-seeking business students as a way to establish a personal brand.Conclude: We found that the principles of product branding closely resembles those of personal branding and are therefore applicable. The models that build a products brand can do the same for a business student. Thereby we can conclude that personal branding does derive from product branding..

The Hunter?s Bend project is about how our personal possessions affect our perceived identity and in what way the value of an object may increase with the relationship that is built up towards the user. I have looked upon traces of time as an extension of an existing object. The outcome is a series of leather cases made out of one piece of folded leather, hardened and locked within itself. The history contained in leather, as a living material has been an important part of the project as well as how its features are used in the making and then allowing the product to change after use..

In this report the two authors, and project contributors alike, describe their work withdeveloping a solar cooker intended for usage in the developing countries of the world.Specifically, the work aims at developing a new, solar heat driven cooking device, possiblybased upon the current product. This should, in comparison to the current product, be lighter,easier to transport and to produce. Also, the new product?s production mustn?t be more costlythan today and the included materials and components must be obtainable from within theBolivian national borders where the product is currently produced. During the project, certainadvantages with a more efficient, and, above all, a more moderately priced product, werediscovered.

With recent technical development computer aided design and manufacturing has taken amore important role in the product life cycle. New business segments such as Product/ServiceSystems and remanufacturing is emerging. This development demands better control of theproduct data throughout the entire product life cycle. Computer aided design is widelyrecognized and used within the manufacturing industries and in recent years the importance ofDigital manufacturing has increased. One part of Digital manufacturing is paperlessproduction which involves all orders and working instruction shown for example on a screenrather than on a piece of paper.

In this report statistics concerning the reliability of sprinkler systems from seven countries has been analysed. The objective of the report has been to determine the reliability of sprinkler systems in Sweden and to present suggestions on measures to increase the reliability. The main conclusion that has been drawn is that the reliability of sprinkler systems in Sweden is 92 percent according to the analysis of Swedish statistics, and that this figure finds support in statistics from other countries. Further results are that the quality of design, installation, maintenance and inspection of sprinkler has to be improved and that the Swedish incident report has to be revised..

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

PURPOSE: To investigate to what extent product brand positioning models can be used to analyzecorporate brand positioning;METHODOLOGY: The phenomenon is observed from a positivist epistemological position within a primarilyinductive research design. The research strategy is defined as qualitative, while the method of ethnographiccontent analysis is implemented to analyze primary data;THEORETICAL PERSPECTIVE: Product and brand positioning literature; Product brand positioning rhombus;EMPIRICAL DATA: Ethnographic content analysis of brand commercials;CONCLUSION: As shown by the extensive literature review product brands (PB) and corporate brands (CB) coexistin corporate environments. One of key insights of this study shows that product brand positioning(PBP) and corporate brand positioning (CBP) processes can also co-exist in the same corporate environment.Moreover, PBs can be built based on the CB, making the investment in CB a long term return on investment.The study also observes that PBP messages include the ?against whom? attribute, highlighting differentiationin the competitive environment; when on the corporate level, this evolves, and in some cases becomes quitethe contrary, when the concept of ?from whom? or ?by whom? is stressed more than the differentiation amongother CBs in the competitive environment. This stresses the importance of including brand identity elementsin CBP..

The purpose of this degree project is to come up with a new package to Renat Brännvin for »Vin & SpritAB« and make the product more attractive on the market of bars, restaurants and hotels. The commissionhas included to decide the material of the package, whether it´s possible to manufacture the productand to make an estimation of the costs.The conditions that »Vin & Sprit AB« set up was to make the product attractive to a younger targetgroup, in this case people from 20 to 40 years old. As Renat Brännvin is considered to be a product of firstclass it´s of great importance that the package reflects the look of a premium product.At first we looked at the history of the company »Vin & Sprit AB« and Renat Brännvin. We decidedthat the package schould consist of a bottle, glasses and a device used when serving the liquor. To getinspiration before sketching we studied different kinds of bottles, glasses and serving devices.

This work of examination describes an environmentally oriented product development aimed to develop new packaging with improved environmental and sale aspects of the products from Primus Sweden AB. The report covers the design process from the first collection of facts to the final results with a description of all methods involved in the work. The focus has been on a clear environmental awareness and the report contains a deepening of the concept life cycle assessment (LCA) for product development. In the process, the consumers? opinions of the brand Primus and environmental profiling formed the basis for the packaging to communicate the right values such as quality, technology, environmental awareness and adventurer?s first choice.The deepening of the life cycle analysis shows that composting and other alternative treatment of the biological cycle is not possible to implement in a satisfactory way in the design process.The work results in two final concepts.

AbstractThe purpose of this study was to identify problems that may occur in the execution of a civil engineering project and suggest measures to reduce the risk of errors. The study was conducted in cooperation with a civil engineering company in the Gothenburg area. During two weeks in February 2012, a field study took place on two construction sites where disruption and problems that took more than 15 minutes to correct were noted. During the field study we identified 39 such occurrences in the projects and then these were classified into different categories according to their cause.The two largest categories were "Design" and "Planning", which accounted for half of the errors that were discovered.In the study results were evaluated to decide whether it was possible to detect discrepancies at an earlier stage. The cost to fix an error in the design stage may be significantly less than to correct the problem in production.According to the evaluation, 55% of the errors could have been detected earlier if there was a greater degree of observation for such issues by everyone involved in the project.