This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

This report covers a product development project conducted as Bachelor of Science thesis forthe Innovation & design engineer program at Karlstad University.The assignment was supplied by MMB Consulting, Kristinehamn. The purpose of this projectwas to find an alternative way of shaping wire-net insulation mats. This insulation product isused for fire and thermal insulation of technical installations. The insulation consists of stoneor glass wool with a sewn on steel wire netting on the out facing side. This netting has thepurpose to enable fastening to e.g.

Extended Producer Responsibility (ERP) is a form of product take-back regulation that requires the producers to manage their products at the end of life. By internalising the products? entire life cycle costs into the market price the ultimate objective of such regulations is to reduce the environmental burden from the products. This Master´s thesis seeks to examine if the total life cycle cost of a product actually is borne by the producer, and if not, predict who will then take this cost. This is done by analysing the market for take-back activities in three different categories of products; electrical and electronic equipment, cars and wind power stations.

Arkitektkontoret Sweco Architects i Göteborg har tagit fram ett förslag för ett bostadsområde i Varberg, där Varbergs kommun var beställare. De föreslog att ett eget områdesförslag skulle tas fram i Revit Architecture utifrån de planbestämmelser som gäller i området. Som en fördjupning i detta arbete valdes att även studera arbetsprocessen i programmet samt hur denna process kan tidsoptimeras. Ett problem idag är att en sådan process kan vara tidskrävande och ineffektiv. Syftet med detta arbete var att finna idéer på hur processen kan effektiviseras och att utveckla kunskaperna om Revit.Som en inledning modellerades hur området ser ut idag i Revit utifrån en ritning skapad i AutoCAD.

Almost every day newspapers cover companies and brands in crisis. This should worry companies as negative publicity has been shown to have a great influence on consumer perceptions on brands. In addition, brand crises have been shown to be contagious, meaning that they also affect consumers? views on other similar brands. This study aims to investigate spill-over effects of one brand crisis to another within a product category.

The thesis concerns itself with studying the effects private brands has on the consumer?s impulse buying in the grocery industry, as in degree of unplanned spending and the selection process between manufacturer brands and private brands when such a purchase is performed. The study?s methodology is characterised by a qualitative approach, whereby the study acknowledges the inductive approach towards the empirical setting even though the Mehrabian-Russell model along with motivational theories serve as highlighters of relevant aspects in the empirical field. The study concludes that both the utilitarian and the hedonic consumer decide what to buy before entering the store, whereby a low degree of needs arise in the store.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

Product development cycles become shorter and shorter. The time from idea to market has become an important competitive factor. Despite this, methods used for making the product development process faster are surrounded with uncertainty about their efficiency. The purpose of the thesis is to describe the pros and cons of ?best practice? methods for shortening lead times and how these methods effect the lead times in research and development.

This study aims to investigate how consumers perceive variety in grocery stores and further how private brands have affected consumers? perceptions of variety in grocery stores.The study focuses on the perceptions and attitudes towards variety and the impact of private brands on perceived variety. Hence, a qualitative rather than quantitative study has been used. Photo elicitation has been used in both focus groups and in-depth interviews, which have been the empirical data collection of the study. Scientific articles and books have also been used in the process.

This is a degree project performed at Halmstad University in Sweden on the subject carpet ofreinforcement. This project is developed in association with Celsa Steel Service in Halmstad.The purpose of this report is to investigate how much time that can be saved if carpet ofreinforcement is used instead of the traditional way to work with reinforcement and seewhat kind of parameters that is important between the choices. We are also going to seehow this product affects the situation for reinforcement workers from an ergonomic point ofview.Carpet of reinforcement is made by straight reinforcement?s bars that are welded togetherwith steel bands. These rolls are made at a factory with a machine that welds together thebars in determined centre distance, with desired dimensions after the constructionengineers? blueprints.

This thesis describes the work process and the results for the development of a newkind of ergonomic cleaning mop, ranging from basic concept to a virtually productionready digital prototype. The project was made in cooperation with, Ömer Altun, whowas also the project supervisor, and whose plan it is to launch this new product onthe market in a foreseeable future. The mop is meant to be used by both professionalcleaning staff and ordinary home users. What makes this product unique is that it hasa movable center piece that simplifies the cleaning under low furniture.The work began with the establishment of a product requirements specification andlater a study of similar products and existing functional models was conducted. Afterthese surveys the work began with refining the existing concepts in order to makethem more complete.

Academic research concerning how to determine the power situation in a supply chain where an investment product supplier is involved did not exist. Therefore new models has been developed that analyses the power relations and maps out the power situation in a supply chain. In the future these models can be applied on similar cases by modifying the included parameters. The new models show that case company FAS should focus on the big producers of garbage bag which are Trioplast, Rullpack and Miljösäck. By strengthen the brand FAS can make more money in these relations.

Denna uppsats undersöker möjligheten att använda ett nätverksövervakningssystem för att även övervaka maskindrivna processer. Kan man baka ihop övervakningen av den maskinella processen och datorn som styr maskinen i ett och samma system? Detta genomförs genom att identifiera och implementera ett lämpligt övervakningssystem i en befintlig maskinell laborationsmiljö. Arbetet utvärderas därefter enligt ett antal felscenarion och även utifrån ett systemadministratörsperspektiv. Intervjuer med praktiker inom industribranchen utförs också för att dra ytterligare slutsatser..

The Swedish consumer electronic industry has recently experienced an increasingly intensive price war. The price war has forced some operators in the business to declare bankruptcy, as the only way to compete has been by driving down prices. A challenge that retail chains in the consumer electronics industry is facing is to increase their margins. If store personnel can success with upselling, the companies will increase their profits. The purpose of this paper is to examine if the sales people in the consumer electronic industry can influence the customer to buy a more expensive product and what the effects the upselling has on the customers' attitudes.

Since Internet has become a more important and more certain source of information the user require greater and more demands than ever before on the layout and function of different web pages. When search engines gives us the opportunity to millions of hits in just a fraction of a second it?s essential to optimize the structure and architecture, which forms the foundations of all the content. In a time when a company?s digital footprint plays an important role for the costumer and the transmitter it?s of utmost importance to have a steady, well-structured foundation to build new platforms of information on.But how do you manage to build a good foundation? Some of the most important key elements in Information architecture are Organizing, Navigation, Search and Labeling.The aim of this study was to create guidelines for a user-friendlier interface, by analyzing the principals and gathered data.