Under framtagandet av nya produkter måste ett antal prototyper tillverkas för att verifiera konstruktionen. För en metodingenjör som tar fram reparationsmetoder innebär prototyptillverkning att tankar som växt fram under utvecklingsfasen kan provas för första gången på en fysisk produkt. Detta sker relativt sent i produktutvecklingen och eventuella ändringar som kan uppstå på grund av att servicevänlighet inte uppnås blir mycket kostsamma. Om däremot prototypen där metoderna verifieras för första gången är digital och detta sker tidigt blir kostnaderna för eventuella ändringar avsevärt mycket mindre. Modellen som ligger till grund för metodstudierna kan sedan används för att skapa ett utkast till service litteratur, detta medför att även den delen av slutprodukten kommer att vara i fas med övriga utvecklings avdelningar.

The continuous process of urbanization results in demands on research and development for ecological and sustainable city development. Because of this, the current systems for wastewater treatment may have to be improved. In order to evaluate new technologies for municipal wastewater treatment, a development project has been initiated for the new district Hammarby Sjöstad in Stockholm. The project is lead by the company Stockholm Water. High environmental standards have been put up for the district, as it must be twice as good as an ordinary new district.

A product and design development of a household device which shall dry food waste has beencarried out in collaboration with Smedlund Miljösystem AB.This project has been implemented through several brainstorms and a questionnaire study.A great insight of how it is to work in a project in real work life has this project been givenme. This is a slightly less straight road to a conclusion than in the academic world that I amused to..

The project has been implemented in collaboration with Carl-Johan Lundberg on Deltagruppen Ltd in Jönköping. Problem introduction comes from Carl-Johan's own experience from the hotel sector. The problem that all hotels has is that they sell two products, i e. simple - and double rooms. Persons that travel in companies do not desire always to share bed.Focus in the work is to develop a product that holds together two simple beds and forms double bed, concurrent that it goes that converters to two simple bed without needing to disassemble the product and be done invisible.

Companies become more and more aware of the added values of the packaging. A well chosen and developed packaging can reduce the costs for the companies through reduced costs for transports, reduced quantity of waste and discards and increased goodwill for example. The companies? costs for salaries can also be reduced due to the increased packaging handling efficiency and the reduced costs for sick leave, reduced work capacity and rehabilitation etc. that can arise when handling poorly developed products and packaging.

This project aims at investigating if the use of UML as a support to small-scale development ofan embedded system is relevant. The investigation is conducted by using UML during the initialphase of the development ofTelfafill, a filling machine by the company ?Telfafill AB?. The aimof the development of Telfafill is to separate the user interface from the control unit. In additionto this main objective, Telfafill AB would like possible changes to, and additions of,functionality of the filling machine to be investigated.Within the boundaries of this project, the development of Telfafill reached a full requirementspecification of the proposed system, and contact was made with potential external developers.No prototype construction had been started when the project ended.

The Thesis purpose is in the context of system development validate the Scrum Methodology. Projects concerning information technology are difficult to manage and tend to fail in quality, time or costs. Scrum presents a new view of the system development. Better cooperation between customers and developers, continuous follow-up on daily basis and extensive communication in the development team are all characteristics of Scrum. Scrum is described as a new paradigm by its founders but has been criticized by experts of system development too.

During the last decade, the construction industry has focused on improving and optimising its production process. The construction industry is now facing larger changes regarding efficiency in their supply chain for the next decade. Many companies are now trying to optimise its supply chain together with its supplier. JM AB, which is one of the biggest construction companies in Sweden, is looking at different options to improve its own logistics together with their suppliers. One option is to use a terminal between JM and the suppliers to solve problems such as quality, custom service and inventory for the in production.

Problem discussion: How should information be handled to facilitate and benefit from modularity? How should Clarkson Inc. adapt their information handling to modularity and what benefits can be reaped by doing this? Purpose: The purpose of this master thesis is to help Clarkson Inc. adapt their information handling to modularity and to extract theories, methods and tools to guide companies in similar situations.

Abstract The Act of Education outlines that good quality in schools and preschools, focusing on continuous improvement, promote children?s learning and this in turn is on of the most important factors for child and youth welfare.This thesis was based on the authors´ pre-understanding that there are opportunities to improvement in the quality of preschools. The focus was on studying how analyses can provide a base for quality work, and the purpose of this study was to identify and describe the analytical methods that can be used in the process of continual improvement for quality development in preschools.A qualitative study was conducted in two preschools that have received quality awards. It was conducted through interviews with the preschool principals and through studies of various documents.In the comparative analysis of theory and empirical data, it was made clear that there was a regular analysing process going on at the investigated preschools and an emphasize of reflection could also be identified. Keywords: Quality development, preschool, analytical methods, processes, reflection .

There are several ways of conducting software testing where some may include users and others may include personnel whose work task is to execute test on systems. Although most developers and project managers understand the point of testing the system, it is not always being done and the most common reason is that there is no time for it. However, this is a false assumption as it may instead cause some bugs in the system that would not have been there in the first place if tests had been there to prevent bugs in the code.My purpose for this thesis was to find suggestions for changes in the development process in an ongoing project used by Acino and Svenska Försäkringsfabriken in order to increase the quality of the system used. In this thesis, I have approached the purpose by pursuing a case study of the two companies through observation and interviews. By doing this I acquired the relevant information to make suggestions for change.

Saab Aerosystems have had one dominating product, JAS 39 Gripen, and one dominating customer, FMV, for a long time. The operations management system at Aerosystems is adjusted for development of Gripen and as the business unit is trying to enter new markets with other products and customer the operations needs to be adjusted to fit the development and manufacturing of these products as well.The purpose of the master thesis has been to investigate how Aerosystems is managing requirements on operations from external customers and how to make improvements within this area. The aim has been to carry out a situation analysis to identify where improvements are possible and then produce proposals for improvements through studies of literature and other business units. The thesis also include a study of knowledge transfer within the business unit to investigate how this can be applied to improve the managing of requirement on the operations.An extensive interview study has been carried out in which interviews mainly have been conducted with employees at Aerosystems, but also at Saab Avitronics and Saab Aerostructures. The reason why these business units have been examined is because they have carried out a large number of successful businesses with external customers, which also are potential customers for Aerosystems in the future.The interviews have been analysed to identify strengths, weaknesses, opportunities and threats with the present way of working.

Åren mellan 1950-1965 ses som första generationens innovationsprocess genom att allt fler företag ökade sin användning av innovationsprocesser i samband med den teknologiska utvecklingen i företagen som kännetecknas av den här perioden. Innovation innebär i korthet att något nytt åstadkoms eller att något redan existerande förnyas. Innovationer är ett måste att använda sig av för att företaget ska ha en chans att hålla sig kvar på markanden trots att konkurrensen bara blir starkare och starkare. Det finns flera typer av innovationer, två exempel är produktinnovation och processinnovation. Dessa två innovationstyper är ofta väldigt nära kopplat till varandra och svåra att skilja på.

Åren mellan 1950-1965 ses som första generationens innovationsprocess genom att allt fler företag ökade sin användning av innovationsprocesser i samband med den teknologiska utvecklingen i företagen som kännetecknas av den här perioden. Innovation innebär i korthet att något nytt åstadkoms eller att något redan existerande förnyas. Innovationer är ett måste att använda sig av för att företaget ska ha en chans att hålla sig kvar på markanden trots att konkurrensen bara blir starkare och starkare. Det finns flera typer av innovationer, två exempel är produktinnovation och processinnovation. Dessa två innovationstyper är ofta väldigt nära kopplat till varandra och svåra att skilja på.

This essay describes a single case self-study of a music composer in order to track the compositional process in real time. In the study the subject and the researcher are the same person. The study builds on previous empirical studies that have used methodological approaches such as analysis of computer-based digital data collection, verbal protocol and video observations. It deals with issues of the compositional process related to for example time consumption, number of artistic decisions, the different roles and skills of a music composer, and methods of research in the musical composition process. During three shifts the researcher worked as a music composer dealing with the issue of converting an audio sketch of a composition into a representative finished audio product.