This examination project has been performed in collaboration with Husqvarna AB, one of the world?s leading manufacturers of both commercial and professional garden products such as chainsaws, trimmers and lawnmowers. Husqvarna AB always strive to develop and improve new and existing products and components to ensure an attractive product and a competitive position on today?s market One of these components is filled balances. This is a component unique to the company and is one of the parts in their fuel-powered chainsaws.

I dagsläget är det svårt för företag att behålla en stark marknadsposition och utmaningen ligger dels i att regelbundet presentera nya produkter på marknaden och ständigt skapa nya innovationer. Genom att använda sig av Lean Product Development i produktutvecklingsprocessen kan företagen anta utmaningen. Det kan dock vara svårare för små och medelstora företag då de kan ha begränsade resurser. Syftet med denna studie var därför att ta fram en projektmodell för produktutvecklingsprojekt i små och medelstora företag. Studien bygger på kvalitativa forskningsmetoder där sekundärdata samlades in genom både bibliotekskatalogen vid Mittuniversitetet och sökningar i forskningsdatabaser på Internet.

This is a master degree thesis at Royal Institute of Technology (KTH) betweenÅngpanneföreningen and Programma. KTH is the examiner, Programma is the client andÅngpanneföreningen is mentor for this project.Programma has a product called TM1800 that has problems with EMC; the problem is thatthis product does only pass the CE-check with a small safety margin. This problem can besolved by reducing the radiation from the electric components in the product or by reducing offix base frame. In this degree thesis the focus is only on mechanical redesign.The main problems right now depends on the long distance between the screws, there is anisolating layer on most of the parts and the forces between the joints are too small. The mainfocus is to solve these three problems.The best solutions are when the whole base frame is more or less redesigned instead of onlyredesigning some of the connection points.

In cooperate with Asko Cylinda we have developed a new heat system too short the process time and reduce the energy consume in a dishwasher and still have it too be a class AAA. The environment and quality is important for the company too still be the number one on the market, If they want too keep that position the product developed of new innovations will be very important. The systems we have developed are more effective and reduce energy up too 25 %. The process time is reduced too less than two hours, from the today two and half-hour. The solutions are too heat up the rinse water and the dishwater at the same time, with a new heating system and it make are solutions unique and effective. Its good for the dish and the environment.

AbstractThis is a thesis done in cooperation with the firm Somas and University of Karlstad. The project is an independent final examination part of the program in Innovation and DesignEngineering comprising 22.5 points, and performed by Mia Myrén Zreloff during spring term 2012. In parallel and collaboration, Fredrik Kjellin performs a similar job for the same company and with the same extent, but for the Program in Mechanical Engineering.The client and supervisor at the company have been Magnus Jansson and Anders Josefsson. At Karlstad University has technical supervisor been Hans Johansson, and in the design- and development process it was Monica Jakobsson. Examiner has been Fredrik Thuvander, professor in the Faculty of Technology and Science at Karlstad University.The mission has been to make a basis work for the company's own development and make a computational model to calculate, visualize and implement materials and other solutions in the manufacture of the company's ball valves.The project has undergone three major phases that included thorough study of the company, production, the problem and product.

Wavecraft AB develops medical equipment for heating of organic synthesises. The heating is done with microwaves, which improves the process in both speed and accuracy compared to the more traditional methods where heating elements are used. This report discusses the developement of an automatic lid mechanism for one of Wavecraft's product prototypes. The company assumes that the final product will be integrated by customers into fully automated systems, and the upgrade from a manually to an automatically controlled lid is therefore an important step in the product's developement process.The first stage och the project was an idea generation process. The ideas generated here were organized into five different concepts of which the best one was selected through the use of a concept matrix.

Metso Paper offers a front-running range of solutions and services for the pulp and paper industry. At the baling unit, design solutions are developed for manufacturing and handling of pulp bales. The machines are continuously developed to satisfy customer needs. One big step in the development of the baling line was to remove hydraulics from the machines and replace it with electrical motors and pneumatics. This was not done on the folding machine which is still driven by mainly hydraulics.

Launching and marketing a health food product is associated with larger problems than a launch of a traditional food product. There are several sales channels that can be used for a health food product, for example the product can be sold as a traditional food product, natural health food product or as a prescription drug. A smaller company can however experience problems while launching its product as a prescription drug because of the large costs associated with this particular sales channel. There is often no other alternative than to launch the product as a traditional food product, this can however create other problems because of the existing regulations on what can and cannot be mentioned in the marketing of a health food product. The limited amount of information about the product that can be enclosed together with it makes it hard for a company to differentiate and position it on the market.

The Master Thesis has been carried out in cooperation with Silva Sweden AB and the objective was to develop a new product concept within the product category for everyday exercise. The purpose of the thesis was to use and analyze methods and tools which aid creativity and concept creation in order to make method recommendations for future projects.During the thesis a number of customer needs were identified, which in turn were translated into 20 concepts. On a concept decision meeting a pedometer-based concept was chosen for development. The new pedometer is in addition to counting steps also able to measure and calculate the user?s total climbed height during a day and present this graphically in comparison to famous monuments or distances.

This thesis has been carried out in collaboration with the IT Company MPQ consulting AB in Halmstad. The task we were assigned by MPQ concerned the development of a scooter that can be used year round. We have with the companydeveloped the criteria and requirements for the product in which the goal is toproduce a primary solution that meets the set criteria and fall within the project'sboundaries.The project involves a wide range of different design methods for idea generationand idea development. The project also addresses engineering methods such asprinciple and primary engineering. Occurringmethods in the project include FredyOlsson principle and primary engineering in cooperation with SVID's - Swedishindustrial design process, etc.The final solution will be presented in the form of sketches, CAD models withassociated drawings and a rendering from the program Keyshot..

In Sweden there are 560 000 disabled people over the age of 16, half of those are in use of some kind of mobility device.Living with a disability means that due to injury or illness you are having trouble functioning without devices or assistance in your daily life and has a big impact on the independence of the disabled user.The everyday life for disabled parents with young children are different depending on the type of disability and mobility device.Today there is no alternative to the stroller for the disabled user who use mobility advises. This causes problems when the disabled person on there own have/want to move the child.The following statement have been the cornerstone for this project: How to make it possible for a wheelchair user to move a child, in the 0-2 year, for longer distances with a focus on independence and safety for both adult children?Due the process, of industrial design, this question and problem have been solved during 10 weeks. The process have contained parts as meeting with users, analyzing, concept development, evaluations, mock-up making, testing, shape & color development etc. This in the end have resulted in a full scale model of the appearance of a proposed product.The result is a stroller witch can be connected to the users specific wheelchair due two one time adjustments.

This candidate report describes how a group of students can develop a smartphone applicationwithout any prior knowledge in the field. To make the project more realistic there is also a clientwho has requests and wishes regarding the finished product.The document describes the methods used to produce the application and also includesexperiences that the group gained. How the interaction with the client has been performed togain a good understanding of what they wished the product to become is also accounted for.The research questions focus on how the development has proceeded and how one can learnsomething new in a relatively short timespan as a group..

This master thesis has been a product realization process. Having BRIO:s walking cart as thestaring point the purpose was to further develop the principle of such products and at the sametime broaden their sector of use. The final result is to be regarded as a complete solutionmeant as a foundation for further development at the BRIO Company. The product aims tosatisfy the demands and needs of the target group called theon the go parent. Trends, qualityand purchase power are features that characterize this particular target group.The project resulted in a walking stool namedBRIO Circus after its source of inspiration.

The project was performed in collaboration with Husqvarna, one of the world?s leading manufacturer in the market of electric outdoor products. The report is a thesis work of a bachelor mechanical engineer program, in the field product development and design.The project is a study of the development opportunities within drive belt for a gear driven gearbox to one of Husqvarnas petrol powered hedge trimmers. A big part of the project was also to find combinations of materials for all components in the gearbox, to reduce weight and maintain or improve the performance of the system. Belt drive was of interest to investigate as an alternative solution to the current design that can reduce wear on the system at a performance test performed in the company before the product is released to market.

Abstract Title: A conjoint analysis of packaging attributes. How can the attributes of a product?s packaging best look like to attract the consumer? Authors: Linda Granberg & Helena Niklasson Supervisor: Jan Svanberg Department: School of Management, Blekinge Institute of Technology Course: Bachelor?s thesis in Business Administration, 15 credits Purpose: The purpose is to find out how visual and technical attributes on product packaging affects the consumers tendency to want to buy the product. Method: Conjoint analysis and a quantitative survey. Results: When developing a package for a food product we?ve reached the conclusion that it is most important to have clear product information on it.