Sök:

Sökresultat:

11971 Uppsatser om Procurement competence and function based specification. - Sida 34 av 799

Miljöanpassad offentlig upphandling: effektivt styrmedel mot koldioxidutsläpp? : En studie av kostnadseffektivitet, transaktionskostnader och teknisk utveckling

Green public procurement (GPP) can be used as an instrument to reduce carbon dioxide emissions, and consideration of environmental aspects within public procurement is becoming more common in Sweden and internationally. Two product groups that have been pointed out as especially important are transports and electricity, where the opportunities for public purchasers to reduce emissions are relatively large. This paper studies GPP which aims at reducing emissions, primarily of carbon dioxide, through environmental requirements within these two product groups. A theoretical analysis of cost-effectiveness, transaction costs and effects on technological development is performed, followed by a closer study of how these aspects appear in practice within GPP. The results indicate that a cost-effective allocation of reductions between the two product groups is most likely to be attained if the main part of emission reduction is achieved through environmental requirements on electricity. The cost for emission reduction within transports is relatively high, especially for heavy transports. For transportation services, more generally focused requirements on emission reductions could probably give greater environmental gains, but the existence of transaction costs steer the environmental requirements towards more technology specific types.

Physically based rendering - Ur en 3D-grafikers perspektiv

Det här kandidatarbetet undersöker hur Physically based rendering kan påverkar en 3D-grafikers arbete. Målet är att skapa förståelse kring physically based rendering och hur denna tekniken kan komma att påverkar en 3D-grafikers arbete. För att undersöka problemområdet skapades en virtuell miljö i 3D med hjälp av physically based rendering. Arbetsupplevelsen jämfördes senare med det tidigare arbetssättet. Undersökningen beskriver tidigare arbetsätt och hur arbetet har ändrats med physically based rendering.

Formgivning av ögonduschkork : Examensarbete, formgivning

This Master thesis was written for Lantmännen Agroetanol in Norrköping concerning the layout of their finished goods inventory and unloading of feed after introducing a new product mix. Lantmännen Agroetanol has two production lines which produces feed. Both lines lead to six silos, used as inventory of finished goods. The feed from the two production lines differ in terms of quality, where as Lantmännen Agroetanol wants to separate their finished inventory in order to charge a higher price, by selling the better product as a premium. With two different feed products the yearly revenue is expected to increase which motivates a research about the current capabilities and necessary changes to be made in the factory.

Mellan bildning och erfarenhet : en studie av litteratusyner i Svenskläraren mellan 1985-2012

The aim of this thesis is to study what conceptions of literature that are present in the teacher magazine Svenskläraren between the years 1985 and 2012. In other words: what is the underlying view on literature's value as a teaching aid and why should we study it in school? I relate my analysis to previous research about the use of fiction in education. A critical methodology has been used to study the material. In my results I distinguish three conceptions of literature that are present in Svenskläraren.

Ett hindutempels verksamhet och funktion i diaspora : En etnografisk studie om ett swaminaryantempel i Mellansverige

 This essay has been investigate a Hindu swaminarayantempel in central Sweden, its activities and function from a diaspora perspective. Also to investigate the relationship between Hindu diaspora groups and in relation to South Asia. An ethnographic method was used.The result of this study shows that the key activities temple provides the puja. Pujan is the most frequent activity in the investigated Temple. The temple also provides other activities that often are linked to anniversaries and celebrations of festive calendar, such as Diwali or gods' birthdays.The investigated temple has a similar function as other diaspora groups.

Medielek och digital kompetens i en förskolekontext : Design för meningsskapande

The aim of this thesis is to make a contribution to the field of design oriented theory, regarding young children and their way to digital competence. My research question is: How can a preschool with a certain pedagogical ICT-design give the children affordances for media play and for developing a digital competence?The European Parliament points out digital literacy as one of the Key Competences for life long learning. A digital competence is built on basic ICT (Information and Communication technology) skills. Skills you can develop any time during life, weather you are young or old.

Förskollärares syn på drama som pedagogiskt verktyg i förskolan

My goal in this study was to research how teachers with education in pedagogical drama think about drama and how to use it as an educational tool. The method I used to acquire the results was by interviews. In total I interviewed six different teachers which had some kind of education in pedagogical drama. This study revealed that all the teachers in some way used educational drama in preschool. The purpose with educational drama is to improve the children's fantasy, creativity, empathy, self-awareness and also their ability to co-operate with other children.

Konstruktion av Industriellt Vibrationsmätningssystem med signalbehandling baserad på Digitala Vågfilter av Lattice-struktur

In this bachelor thesis a complete prototype of an industrial vibration measurement platform has been developed. By measuring a number of variables such as acceleration, temperature and speed conclusions can be drawn on machinery health. The aim is to evaluate hardware and software solutions for a possible future product. Based on a requirement specification a proper hardware design has be developed. The hardware consists of a four-layer PCB with an ARM Cortex-M3 microcontroller and about 250 other components. The PCB was designed, assembled, tested and finally housed in a box.

Förfädernas berg? : en tolkning av fornborgen på Halleberg

The essay deals with the hill-fort on the mountain Halleberg, Sweden, its wall design, functionality, dating and its possible function as a central location and a place of worship of the ancestors.The Halleberg hill-fort consists of a 1500 meters long at times cohesive stonewalls which together blocked the mountain from its surroundings. Hallberg's natural vertical scree and cliffs along with the masonry blocked the whole mountain from the surroundings.The hill-forts, with few exceptions are largely not investigated archaeologically and its functionality and role in the ancient society is based on outdated research on the subject. The current archaeological interpretation is that hill-forts served as temporary defense in times of unrest or served as center of power for a social elite. The prevailing view in the archaeological sphere is that the hill-forts had a variety of functions and that its functionality and role in ancient society has varied.Halleberg´s strongest wall sections are at the mountain's south-eastern part where the natural driveway, Storgårdsklev is located. Along with the massive masonry of the walls in Bokedalen Storgårdsklev functioned as the hill-forts main entrance.

Lärmiljö, frizon eller sysselsättningsarena? : En kritisk analys av fritidshemmet i en era av new public management

In 2014, the Swedish leisure-time centres after school became widely criticized on several occasions by school authorities. The cause for its criticism was a reflection of leisure time-centres with lots of untrained staff and a lack of pedagogical aspirations. The conclusion of the criticism was that these leisure-time centres do not fulfil their potential. However, these assessments has only to a limited extent become a part of the public educational discourse in Sweden. This discourse has mainly focused on the decreasing results in the Swedish school, which has caught the attention in the media and ended up on the political agenda.

Ökat kompetensutnyttjande - en nyckel till att öka det ideella engagemanget i en brukshundklubb?

The basic intention of this study is founded on an ambition to make change within the competing activity at ?Svenska Brukshundklubbens Halmstadavdelning? (SBK Halmstad). This is a local association for owners of working dogs, where I am one of the members. A problem in engage a larger number of voluntarily working members in the association has been established and discussed over several years. My premier aim was to make the members award of different perspectives of the problem.

Att möta ungdomars sexualitet på HVB-hem : En kvalitativ studie av hur behandlingspersonal upplever mötet med ungdomars sexualitet

The aim of this study was to investigate how staff members at residential homes experience encountering sexuality among the youths. The study was conducted by using qualitative interviews with four staff members at four different residential homes. The interviews have been analyzed by using content analysis and have been looked at through a perspective of experience, as described by Richard Stevens, and by applying developmental psychology. The results show that, although sexuality is experienced as being distinctly present and being a topic of major concern, the staff members have given sex-education as a means by which to raise their own competence little or no thought. One way to interpret this is that sexuality and sex-education haven?t been given a sufficient space in the work with the youths.

Design for assembly

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

Make or buy-analys

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

SPICE UP APQP

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

<- Föregående sida 34 Nästa sida ->