PurposeThe purpose of this thesis is to provide a deeper understanding of how e-commercecompanies within the fashion industry are working with lead times and illustrate andanalyse differences and similarities between companies.Research question- In which ways are e-commerce companies within the fashion industry working withshort lead times?MethodologyThis thesis is based on a qualitative research method in order to achieve a greaterunderstanding of the chosen topic, of how the chosen companies are operating and toprovide room to our own interpretations and reflections. Interviews through telephonewere used to gather the empirical data from six different e-commerce companies withinthe fashion industry.ConclusionsAfter completing the theoretical and empirical analysis it can be concluded that leadtimes are considered essential for all of the participating companies but there is adifference in which way they look at, and how they work with lead times. Somecompanies stressed that short lead times are an important aspect of competition andclaimed that this is something they are constantly working with. For others the balanceand matching of supply and demand was the most important factor rather than toachieve short lead times.

Product development cycles become shorter and shorter. The time from idea to market has become an important competitive factor. Despite this, methods used for making the product development process faster are surrounded with uncertainty about their efficiency. The purpose of the thesis is to describe the pros and cons of ?best practice? methods for shortening lead times and how these methods effect the lead times in research and development.

In this report a systematic working procedure for risk classification of processing equipment from a maintenance point of view is described. How this system has been worked out is also an important part of the report. The classification system is adapted for use in complex processing plants. Preemraff Göteborg has been subject for the underlying study and application of the system.The system aims to give a good overview of the maintenance related risks at the plant. Furthermore, the analysis result is a good motivation for the suggested maintenance activities and as motivation for extended or decreased maintenance resources in total.

Consumer Information Processing (CIP) handlar om hur vi som konsumenter tar till ossoch påverkas av den information som ständigt omger oss vid en beslutssituation. Ämnethar länge varit i fokus för forskning inom marknadsföring då detta naturligtvisintresserar företagen i hög grad. Tidigare forskning hävdar att när vi som konsumentertar till oss av de intryck som omger oss, bearbetas dessa intryck tillsammans med dekunskaper vi har sedan tidigare (bottom-up processing och top-down processing).Studier har visat att information som tilldelas oss kan ha direkt påverkan på våra sinnenoch hur vi upplever en produkt.Denna studie undersökte hur olika typer av tilläggsinformation påverkade konsumentersupplevda smak av vin. Tolv testpersoner studerades i ett experiment bestående av tresteg där olika betyg presenterades på de viner testpersonerna bedömde. Resultatet avstudien visade att kvinnor i högre grad påverkas av negativ tilläggsinformation medanmän i högre grad påverkas av positiv tilläggsinformation..

The purpose of my one year master?s thesis is to add a documentation of a data processing-process of photo- graphs to the administration of archives. The thesis is written from an archival science perspective which is to be seen in my choice of literature, method and questions at issue. To be able to form a documentation of a data processing-process I studied DiBiS, a company specialized in digitalizing old photographs and publish them on a online database. I also added a chapter where I studied how archival institutions used to handle their old photo- graphs in a traditional manner so the reader of this thesis will be able to understand and see the differences be- tween traditional and modern photograph management.

Just how far is it possible to make learning of new parts for recognition and robot picking autonomous? This thesis initially gives the prerequisites for the steps in learning and calibration that are to be automated. Among these tasks are to select a suitable part model from numerous candidates with the help of a new part segmenter, as well as computing the spatial extent of this part, facilitating robotic collision handling. Other tasks are to analyze the part model in order to highlight correct and suitable edge segments for increasing pattern matching certainty, and to choose appropriate acceptance levels for pattern matching. Furthermore, tasks deal with simplifying camera calibration by analyzing the calibration pattern, as well as compensating for differences in perspective at great depth variations, by calculating the centre of perspective of the image.

In 2007 Swedish Meats, the dominant Swedish meat-producers cooperative sold its slaughtering and processing industry. The goal of a producer cooperative structure is to create value for members through vertical integration, and to strengthen members? market position. When Swedish Meats sold the slaughtering and processing components, it ceased in some respects to serve the function of a cooperative. This is a lost opportunity for both members and non-members, because Swedish Meats as a functioning cooperative could have exploited its dominant market position to positively effect producer?s prices.

AbstractTitle: The war in Afghanistan ? a necessary evil? (Kriget i Afghanistan ? ett nödvändigt ont? En kritisk diskursanalys av New York Times ställningstagande till och framing av kriget i Afghanistan)Number of pages: 41 (41 including enclosures)Authors: Jenny Häggmark, Madeleine JanssonTutor: Christian ChristensenCourse: Media and Communication Studies CPeriod: Fall term 2011University: Division of Media and Communication, Department of Information Science, Uppsala UniversityPurpose/aim: Our main goal with this paper is to examine and describe how The New York Times have framed the war in Afghanistan in their editorials, and how their position on the war is reflected in the editorials. We are also interested in finding out if their position on the war has changed during the ten years of war. Are the New York Times editorials characterized by peace or war journalism?Material/Method: To fulfill our aim with this paper we are going to use a qualitative method of content analyzes, the critical discourse analysis, when we analyze the editorials selected.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.

In 2007 Swedish Meats, the dominant Swedish meat-producers cooperative sold its slaughtering and processing industry. The goal of a producer cooperative structure is to create value for members through vertical integration, and to strengthen members? market position. When Swedish Meats sold the slaughtering and processing components, it ceased in some respects to serve the function of a cooperative. This is a lost opportunity for both members and non-members, because Swedish Meats as a functioning cooperative could have exploited its dominant market position to positively effect producer?s prices.

Kontorslandskap är en vanligt förekommande kontorsdesign och fördelar och nackdelar med att arbeta i sådan miljö är oklara. Syften med denna studie var att a) undersöka hur individer upplever att arbeta i kontorslandskap och vad det kan ha för konsekvenser för hälsa och arbetsvillkor, och b) undersöka deras grad av känslighet i förhållande till kontorslandskap, hälsa och arbetsvillkor. Studenter vid Beckmans designhögskola deltog i studien genom att fylla i en enkät. Resultaten visade att upplevelse av kontorslandskap var relaterat till anspänning av arbete och arbetstillfredsställelse men inte till sensory-processing sensitivitet vilket är delvis i linje med tidigare forskning. Att uppleva kontorslandskap som positivt kan kopplas till högre arbetstillfredsställelse och lägre anspänning av arbetet.

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

We have different kinds of signal processing everywhere around us in our everyday life, in our cellphones, when we are listening to music, watching TV etc. This makes signal processing a very interesting and important technical area, where the demand of skilled engineers sets the limit of what is possible.Working with signal processing requires in-depth knowledge in areas such as mathematics, physics, electronics, and other related areas. For this, it has traditionally been demanded by a talented developer to also master the advanced programming languages such as C / C + + and Assembler.This has begun to change; today there are several companies that offer graphical development environments for signal processing, environments where programming skills are not needed anymore, and the focus can be on signal processing instead.The goal with this project is to build a corresponding graphical development environment to reach an understanding of what is required of these systems, and also to grasp what opportunities that are available within graphic programming. Inspiration for the work has partly arise from some of the tools available on the market, and partly from previous theses that have been written about graphic programming.The challenge lies in creating a program that can execute signal diagrams in real time from given signal blocks, and be able to handle feedback loops in an efficient way and to do so at the lowest "cost" in terms of clock cycles as possible. This should also be compared against to code, compile and run a complete signal diagram directly.To increase the usability it should also be possibility to externally manage in real time the parameters of the signal diagram during execution.The interface is a separate program, which is to some extent similar to Matlab Simulink, where a signal diagram is drawn up graphically by connecting wires between different signal blocks.

The degree project is performed at Metso Kamfab. The production is aimed on machines everything from handling of fiber to paper pulp. Metso Fiber and Kamfab are using Pro/Engineer for design and blueprint production. The processing department types the NC-programs in notepad on the basis of the blueprints, the CAD-dates that already is there are not used. The aim with the work is to study if Kamfab can use CAM-system for processing and production of programs for their NC-machines.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.