AimThe aim of the present study was to study possible evidence for shock wave therapy on pain and function in patients with plantar fasciitis.Questions1. Does shock wave therapy reduce pain in patients with plantar fasciitis?2. Does shock wave therapy improve function in patients with plantar fasciitis?MethodA systematic review of the literature was performed in the databases PubMed, EMBASE, Cochrane and Cinahl.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

The purpose of this study is to increase the understanding of activities, flows and waste in a company's production process. By performing a value stream analysis, non-value adding activities are identified in a production process and then the suggested improvements that can reduce lead times will be stated. The value-stream mapping identifies the flow of information and the flow of material in a production process and this provides the basis for the identification of non-value adding activities.We conducted the study at Lammhults Möbel AB in Lammhult Sweden, where the production flow of Spira-21 has been investigated. This to identify any non-value adding activities that affect the flow negative and consumes time and money in a non-value adding way.A reasonable approach for the project was taken by studying the methodologies and theories. We conducted interviews and site surveys at Lammhults Möbel AB where the flow of information and material in the production process were investigated.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

The aim of this study is to examine the investment decision process for investments that arise due to strategic changes and are of strategic importance to the company. At the foundation of this study is the previous research in this area, done by King (1975) and Bower (1970), which examines the investment process on a more generic level. At the core is the investment decision process pertaining to Projekt X, an investment performed by NordiCorp. Having conducted a case study including six interviews with employees from various parts of the organization, combined with a large number of internal documents, the process regarding the investment decision was carefully illuminated. The results show that in many regards, this process follows the more generic investment process.

This project is about investigation and improvement of a V-plow for the company Swekip. A V- plow is used for snow removal but this product has been found to have deficiencies in its construction, breaking down and not living up to the desired objectives. This is because the product is ordered from a company in China where they have some problems with understanding the purpose of the plow.Initially the existing plow is investigated, all the shortcomings set out and examined, what is wrong and what needs improvement?When the solutions were done they were evaluated and examined that they actually live up to the desired requirements.This assignment is a pure construction project where the majority is implemented in CAD, where models are developed and FE analyses are carried out. But the project also includes a feasibility study, idea study and hydraulic design.The results are presented in the form of a CAD model and associated drawings that will serve as the manufacturing basis for the new V-plow.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

AbstractThe development of the construction industry is slower compared to other industries. This implies that there must be improvements in this field. One step to increased effectiveness in construction projects is making the construction process more efficient, therefore resulting in a positive result for both the actual construction project and for the overall branch. The purpose of this study is to identify areas for improvement within the municipal housing company Gavlegårdarna completed construction project, who will then contribute to increased efficiency in their upcoming projects. The work has been performed with the help of two case studies examine construction projects "Fullriggaren" and "The three nursing homes." Opinions about what could have improved the efficiency of these construction projects further have been collected with the help of an interview study among some of the project participants involved in both projects.There have been many studies addressing the topic of how the construction process can be streamlined and similar studies that have been previously conducted.

To implement an ERP-system is not an easy process. The success of the implementation depend on many different variables. The most important one is perhaps the requirement process, to define what the organization wants and expects from the system. In this study, the advantages of a process mapping are examined, in relation to the phase where the requirements are expressed in an ERP-implementation. The conclusion is that a process mapping generates an increased communication with the supplier of the ERP-system, hence the business knows their processes and thereby what they want from the system.

Under senare år har allt fler organisationer och företag insett hur viktigt det är att identifiera och förstå sina processer, och för att kunna styra och utveckla dem, är det bra att veta vilka de är. Därför vill Reumatologi kliniken veta vad som händer med patienter som har psoriasis artrit, när dem är nyinsjuknade eller ska börja behandlas på deras klinik, samt hur hanteras smärtproblematiken, när de återkommer till kliniken, detta har vi gjort genom att kartlägga processer och sammanställa på vilka olika sätt dessa patienter hanteras på kliniken idag, vart remitteras de? Hur ofta förekommer detta? Vad gör att vissa remitteras och andra inte? Förslag på hur kliniken kan använda denna kartläggning i framtiden.Detta examensarbete genomfördes på uppdrag av:Centrum för Teknik i medicin och hälsa, CTMH, i samarbete med Karolinska Sjukhuset. Arbetet omfattar 15 högskolepoäng.Vid detta arbete har vi använt oss av djupgående intervjuer för att få en djupare insyn i den reumatologiska klinikens handläggningsprocesser. En konstruktionsmodell har utvecklats för att identifiera vilka intervjufrågor som är relevanta för detta projekt.

This Master Thesis has been carried out in cooperation with Silva Sweden AB. A companywhich manufactures products like compasses, pedometers, headlamps, hiking poles and otherequipment for the out door life and navigation. The purpose of the project has been toassemble methods and models which support user involvement in Silva?s design process.Thus, to increase the number of products with purchasing power, enhance product quality aswell as increase foundation for new product ideas.The focus through out the project has been to assemble a pallet with methods for userinvolvement and from this select a few methods that will fit the company. The purpose of thepallet is to be accessible for the company during their work of change with the design processthat has been going on and will be in the future.

Abstract ? ?Aggregate complaints in banks MIS?Date:                       June 8th 2012Level:                      Master thesis in Business Administration, 15 ECTSInstitution:                School of Sustainable development of society and technology, Mälardalen UniversityAuthors:                  Abdulla Ahmed Ibrahim         Alexis AnderssonTitle:                       Aggregate complaints in MIS ? A case study of Nordea BankTutor:                      Carl G ThunmanKeywords:               Aggregate, complaint, dissatisfaction, content analysis, Nordea, MIS.Purpose:                  The paper aims to develop a model of how Nordea Bank can monitor customer dissatisfaction through aggregated dissatisfaction analysis. Furthermore, the study aims to identify improvement proposals in Nordea based on the developed model and conducted interviews.Method:                  This thesis consists of qualitative interviews. Personnel at the local office in Västerås has been interviewed as well as Nordea?s customer ombudsmen, former office employee at Nordea, data analyst, head of customer inquiries, Professor of database technology and also a researcher in language technology.

Considering that the current technology is constantly improving, it becomes increasingly important to have an efficient logistics in a company to maintain profitability while achieving a competitive business. Efficient logistics may be accomplished by improving the internal materials handling. In this thesis the internal material handling of steel frames has been studied at a factory in Vaggeryd. The goal of this study is to investigate the problems that exist with the current production flow of products and provide suggestions on how it can be developed to reduce unnecessary handling and movement.The study has a deductive approach where the authors has been using literature studies parallel with empirical analyzes conducted at a company to achieve the purpose of the study. Documentation from the company and interviews with staff and observations form the basis for the data collection carried out.

This case study is performed within the production of Sherwin-Williams, Bellö. The purpose is to increase the understanding how a value stream can function more efficient, from a lead time perspective. With the analytical model that is build up on known theories, the purpose have been fulfilled. Mapping of value and non value time for four products thru their respectively process reveals wastes, which is, waiting, transport and movement, incorrect processing and set-up time that in it self create transport and movement. Thru identified wastes that causes loss in lead time suggestions of improvement has been proposed.

The aim of this study was to design short interventions based on the literature study, which will change the pupils? posture on mathematics and connections between problem-solving in mathematics and everyday life. An experimental group of 17 pupils in fifth grade participated in the study and were educated in everyday mathematics 20 minutes a day during four weeks. The intervention was measured in a pre- and after questionnaire, in order to control the design and discover possible changes in the pupils? posture on mathematics and connections between problems and everyday life.