The acquisition process as an object for research and empirical studies have increased in importance during the past decade. The purpose of this thesis is to investigate this process further. This was done by reviewing previous research covering the area of mergers and acquisitions. Seven key factors that should be considered in an acquisition process emerged; acquisition project management, planning, communication between the acquirer and the potential target, goal alignment within management, company-cultures, a trade-off between a certain speed in integrating the companies and consideration of the employees, and finally the follow-up. These factors have been shown to increase the likelihood of value creation in acquisitions.

This report is the result of a thesis performed at Westermo Industrial Ltd with its headquarters in Stora Sundby and it sums up the author's studies for University Engineering in Innovation, Production and Logistics at Mälardalen University.The main goal of the thesis was to identify problems and suggest actions that lead to the reduction of the repair time from 3 weeks to 2 weeks. The key questions that were answered in order to achieve the thesis objectives are: What are the biggest challenges that make the repair process time last for 3 weeks? What are the necessary means and measures in order to reduce the repair length to 2 weeks? The author adjusted the work to the Swedish repairs, repair issues that arise from sell unit Westermo Data Communications AB with its office in Västerås and performed the status report by mapping the repair process, through using observations, interviews and bibliography research studies. A flow map of four sub-processes (Inbound Delivery, BackOffice, Repair Department, and Logistics) was made and each section was observed, where also the employees were interviewed. Data that has been collected was analysed by the author and the decision to execute a workshop that affects Repair Department and Logistics was made.

Assignment Birino AB are aware of the fact that their work tasks can be improved. The author?s assignment is to identify one task and improve it with relevant tools.Purpose See if the authors can improve health and effectiveness by changing the work task.Method The authors have conducted qualitative interviews, a quantitative survey and an experiment to see how the change worked in practice. The data the authors have collected will then be presented with relevant theories to answer our research questions/issues.Conclusion The authors have done a work process that can be used as a tool for change and improvement of health and effectiveness. This process can be implemented in different companies and not just the company that the authors have chosen to work with. .

The purpose of this thesis is to get knowledge about how it is to work as a librarian at Gothenburg city library during a rebuilding process and during the time when they have worked in a temporary library so called niche library. Which part did they have in the renovation project and in the niche library? The aim is also to find out how the librarians have experienced their time in the niche library and if it has affected their profession and identity.The method that is used to answer questions of the study is semi-structured interviews with four public librarians. Through comparing previous research in building and rebuilding process I have analyzed the four public librarian?s part in the renovating process and the temporary library.

Titel: Value stream mapping in practice ? A case study at Light MyFireAuthors: David Rydman and Tomas ÖnnemarMentor: Veronica Ülgen SvenssonExaminer: Åsa GustafssonBackground: Companies push their prices in today's markets to be competitive, which means that companies need to find ways to reduce costs while maintaining profits. (Cudney, 2009) According to Bergman and Klefsjö 2007, the basic rule of quality improvement says "there is always a way to achieve higher quality at a lower cost". One way is to improve a company's processes to get a more efficient flow and improvements that may cut costs. (Bergman & Klefsjö, 2007) Why it's important to look at the processes are that they often contain waste that can be eliminated.

The study was conducted in Jönköping County Chamber of fibrillation and is about change and improvement of process modeling technology. The process for treating patients with fibrillation is in the need to evolve and improve. In order to develop the care they needed a current state description which usually is made with the traditional process modeling tool.Many scientists and health professionals is in the opinion that this technology gives a too rigid image to describe the care processes. It also does not sufficiently take into account the human aspects. This reasoning suggests that the process modeling technology in healthcare is in the need to develop multiple perspectives.

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER).

Trioplanex International AB is a part of the group Trioplast Industrier AB, which produces packaging materials for the film and hygiene industry. The group is active throughout Europe, where most of the production is located in Sweden, with head office in Smålandsstenar. Operations in Landskrona consist of Trioplanex International AB and Trioplast Landskrona.Semi-finished articles consisting of paper cores, so called bobbins, give rise to a high amount of core waste in any form of core cutting. The objective of the report is to map out all core waste and illustrate the material flow with regard to present layout and equipment.In the beginning of the project an analysis of the current process was carried out with focus on the cutting equipment. A case study in the form of an improvement work took place in order to reduce the causes which had the biggest impact on existing machinery.Improvement proposals were discussed by the author together with supervisor, assigner and other parties involved.

The purpose of this bachelor thesis was to gain a deeper understanding of and examine how library blogs are realized at public libraries together with the views among librarians regarding the realization of library blogs.The questions we wanted to answer were: ? How is the library blog realized at the public libraries in this study? ? What are the views among the librarians in this study regarding the realization of the library blogs?The analytical model in this thesis is Connie Crosby?s six steps on how libraries successfully can realize their blogs. Four of the six steps were selected: planning, implementation, marketing and measures of success. The methodology used for this study was semi-structured interviews. Two interviews were conducted with three librarians that have partial responsibility of their respective library blogs.The results of the study show that the process of the library blog can look different in different libraries, and that the respondents had clear views on how the realization of a blog should be done.

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER).

The core process is responsible for internal business development and is the process that runs through the organization and the results which creates a value for the customer. Some research suggests that identification of the client's conscious or unconscious needs clarifying the so-called core process in the organization and operations can thus be more effective. The study aims to identify and analyze the experience of the core process within child health care. The method has been interviews with nine managers and 10 clinic nurses in a county. The results show a lack of knowledge regarding core process and process work.

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

This thesis has been conducted at Volvo Bussar ABunder a period of ten weeks. Within the organizationVolvo, the work is conducted with leaders and teamson every level; from production to top management.They have three tasks, besides executing their dailywork, they are expected to actively work on improvingtheir individual work as well as themselves as persons.The two latter are future value adding activities for theorganization. When doing so, however, it has beennoticed that they often lose the grasp of their dailywork. The question that consequently arises is whythis happens. Is it because of lack of time or it isbecause the co-workers do not have the competenceand simply do not know how they are to execute thethree tasks? Or, is it because the motivation to executethe three tasks is not enough? With this in regard, thestatement of issues for this bachelor thesis were thefollowing: how can the conditions for leaders and theteam be improved, in order for them to execute thesethree tasks.To find out why the execution of these threeassigments did not always succeed, the decision wastaken to conduct a survey and interview study in reallife and at the plants.

This thesis has been conducted at Volvo Bussar ABunder a period of ten weeks. Within the organizationVolvo, the work is conducted with leaders and teamson every level; from production to top management.They have three tasks, besides executing their dailywork, they are expected to actively work on improvingtheir individual work as well as themselves as persons.The two latter are future value adding activities for theorganization. When doing so, however, it has beennoticed that they often lose the grasp of their dailywork. The question that consequently arises is whythis happens. Is it because of lack of time or it isbecause the co-workers do not have the competenceand simply do not know how they are to execute thethree tasks? Or, is it because the motivation to executethe three tasks is not enough? With this in regard, thestatement of issues for this bachelor thesis were thefollowing: how can the conditions for leaders and theteam be improved, in order for them to execute thesethree tasks.To find out why the execution of these threeassigments did not always succeed, the decision wastaken to conduct a survey and interview study in reallife and at the plants.

The purpose of this study was to evaluate if verbal encouragement had any influence on handstrength measurements. Twenty subjects participated in the study, all women between the age of 20 and 62 years. A standardisation of testing conditions and verbal encouragement were designed. Three measurements were conducted during two days using T.K.K 5401 Grip D. First there was a trial set, and then Test 1 (without verbal encouragement) and Test 2 (with verbal encouragement) were conducted.