This report analyzes and examines a hypothesis for finding a method to optimize thelength of the delubrication process time based on a total charge weight. The work hasfocused on the holding time for delubrication and the total charge weight.An important step in the manufacturing chain of cutting tools is when the greenbodies undergo the sintering process. Today, the delubrication step has the sameprocess time independent of the total charge weight. An implementation of a methodto adjust the delubrication process time would give more consistent quality of thecutting tool´s internal characteristics but also reduce the time course of the sinteringprocess. In the present project two methods for this goal were tested, thedevelopment of an algorithm and a weight interval subdivision with associateddelubrication process times.During delubrication a pressure increase is observed due to the decomposition of thePEG in the powder mixture.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

The final stage of a designers work is always a bit tricky. Design is an abstract phenomenon and no one can tell when a design is really finished. The design process that designers work within has been thoroughly studied but cannot be truly mapped with strict constraints which the designer can follow to succeed. Therefore, in this paper we take a look at the final stage in the design process. The main goal is to get more knowledge and highlight key factors about what designers face when they are about finish their design or what forces them to leave a project that can stay in development for eternity.

Each student in elementary school will under current policy documents have an individual development plan (IEP) from 1 January 2006. The plan should primarily aim for a higher goal achievement, but also to the student to gain a greater understanding of their own learning process and knowledge. My experience is that some students, despite efforts IUP have difficulty seeing their own learning process and it has been the starting point of my study. The aim of the study has been to investigate and analyze teachers work with individual development plans from the first grade to the sixth grade from a teacher's perspective. The goal was to identify strategies and techniques that could help develop IUP as a tool for the student's learning and understanding of their own learning process.

När man studerar förädlingskedjor finner man tre flöden som påverkar och är beroende av varandra; det fysiska-, informations-, och det finansiella flödet. Det fysiska flödet är det mest påtagliga och består främst av varor, informationsflödets uppgift är att administrera det fysiska flödet så att det blir effektivt och det finansiella flödet handlar om penningöver-föring. Ett första steg för att effektivisera flöden är att genomföra en processkartläggning.Syftet med uppsatsen är att kartlägga en kollektionsprocess på fallföretaget XY. Kartlägg-ningen ska resultera i identifiering av problem i processen samt förbättringsförslag. För att besvara syftet har fem frågor ställts i rapporten, två exempel är vad är ett bra materialflöde? och vad ska man tänka på inför förbättringsarbete med processer?Olika metoder har använts vid datainsamling, bland annat intervjuer, e-post och litteratur-studier.

This dissertation is carried out on behalf of Two i Sverige AB. Two is a consulting agency which primarily works with the development of homepages. The company has several of its complete applications written in ASP e.g. the development of homepages. At the agency they have seen benefit migrating these applications from ASP to the more flexible environment ASP.NET.

By studying literature concerning design, didactics and reflection, and complementing those explorations with interviews with experienced design educators, this thesis challenges the idea of aesthetic media education being purely aesthetic in its characteristics. Drawing from their own experiences as a media aesthetics educator and an industrial designer, the two authors argue that the work flow used within most fields of design, commonly known as the design process, might provide a suitable didactic alternative to a field of education lacking relevant methodology. The literature study offers a better understanding of the design process and how it may be defined and viewed within an educational context. The interviews provide a more practical insight into the world of design education. The result shows that the design process as a didactical method theoretically offers both elements of critical thinking as well as direction and frames for students lacking aesthetic and artistic experience.

Like many small-time companies there is a need to improve the flow of materials at HSP-Gripen AB. The company develops and manufactures hydraulic-powered grapples for the machine- and forest industry. By mapping the material flow in the current production and gathering necessary data, suggestions on how different parts of the production could be controlled is presented in this dissertation. This has been achieved by the study of relevant scientific literature. The suggested ways of controlling the production consist of 2-bin systems, hybrid material flow system as well as a cyclic product-planning.

This study examines the possibilities of interpreting the moral values and ethics presented in the current curriculums in a way that makes them inclusive and constructive. The study also reveals how the liberal democratic ideal, presented in the curriculums as a hyper-ideology, is not at all easy to define or live up to in the pluralistic school of today.By close-reading and criticizing the curriculum for the Swedish senior high school (Gy11)and by looking at it from two different points of views, as rules or norms and as a process, Ishow how the curriculum can be interpreted as a basis or starting point for a communicationabout values. I also discuss wether the aim of this communication should be consensus or anongoing process..

Companies acquiring ERP systems are often dissatisfied with the project and therefore consultancy firms wish to make use of project models in order to achieve success in implementations. Since research on ERP implementations in service companies is limited, there is a need for mapping of critical activities in implementation projects in this line of business. Under these premises, the purpose of our master thesis is to develop a model for implementation of ERP systems, specified in activities, which can be used by mid-sized consultancy firms with mid-sized qualified service companies as customers.A literature study including project models, modern models and methodologies for ERP implementation, commonly existent activities, success factors and system development methods was carried out. Starting out with this, a theoretical model for ERP implementation was generated. In excess of this, a case study was conducted, where the implementation of the ERP system Microsoft Dynamics AX at the service company Eurostep, performed by the consultancy firm Medius, was studied.

Companies learn through their employees. In this paper I make research into how knowledge transfer and learning occur at Metso Paper Karlstad AB, which is a partly project based organization.The result is that there are many factors that affect the knowledge transfer in a company. Knowledge transfer occurs mainly between individuals within the company, but also between departments and other actors outside the company. In the gaps between these actors, there is a risk that knowledge is not transferred, which is an obstacle to learning. A great deal of the knowledge transfer and the learning is carried out through individual?s own drive and motivation.

The aim of this study is to increase understanding about addiction recovery. More specifically, we want to know what people who have had problems with alcohol and/or other drugs perceive as helpful and important for their recovery process and how we can understand this process.The study was conducted by means of qualitative semi-structured interviews with four people who have had alcohol and/or other drug problems. The analysis is based on a transtheoretical model of change from addictive behaviours, coping, interactionist theories and also a recovery perspective, inspired by research on recovery from mental illness . Main findings are that recovery from addiction can be understood as an individual process that takes place in a social context and can follow expected phases, although there are large individual differences in the process. Through the recovery process it has been of importance to the participants in the study to redefine themselves and their problems, get support from others, find ways to cope with their problems, get involved in meaningful activities and to expand their social roles.

The aim of this thesis is to describe the rise of the Tea Party movement in the United States. By using a known theory within social movement studies, the political process theory, this thesis look into the factors that could have played a role in the rise and fast mobilization of the Tea Party movement. The political process theory consists of three parts and hence looks into both the political structure of, in this case, the United States, how mobilizing structures have been used and into the cultural framing used by the Tea Party to create their identity. In order to bring structure to the thesis, the three theory parts have been transformed into analysis models. These give a very good idea of all the factors that could have played a part and therefore also a good way to describe the rise of the Tea Party movement.The research confirm what the political process theory says, that the Tea Party movements rise came at a time when there were a mix of factors at play, both structural and cultural, creating an opportunity that the Tea Party took.

A Road project?s frame is built up of a decision- and consultation process, where the results of the preparatory studies are being discussed. The aim with a consultation process is that all theopinions and knowledge from the operators' will be taken into count in the basis of information, that is needed in order to the different involved operators' to take a decision.The aim of the essay was to investigate how the decision- and consultation process for a road project, the E4 section between Uppsala Läby, turned out. The aim is also to bring up how theprocess could have been done more correctly. The study was carried out through a qualitative method with an analysis of materials from the National Road Administration's archives, the associated Environmental Impact Assessment (EIA) and through interviews of the different operators.My theoretical basis has been a Stakeholder Analysis and its principles, and theory about different executions of social planning.The result showed that the decision- and consultation process has been bursting in democracy and consideration taking of the different operators' opinions, has been poor from the developer?s, in this case the National Road Administration's, side.

Syftet med denna studie var att utifrån ett socialkonstruktionistiskt perspektiv och ett Foucault-inspirerat diskursanalytiskt ramverk visa på några av de sätt att tala om och förstå den bildterapeutiska processen som finns tillgängliga för och används av bildterapeuter. Syftet var även att beskriva hur dessa sätt att tala kan påverka bildterapeuter i det bildterapeutiska arbete de bedriver. Datainsamlingen genomfördes med semistrukturerade intervjuer med bildterapeuter. I resultatet lyftes tre distinkta sätt att tala om processen fram, som gav den tre olika innebörder. Dessa tre diskursiva konstruktioner framställde den bildterapeutiska processen som en blottläggande process, som en experimenterande process och som en reflekterande process.