This thesis is written at WSP management and investigates the practice of pre-project planning and feasibility studies at Swedish construction companies, through the study of the ongoing feasibility study of the mall Sturegallerian in Stockholm, and through interviews with experienced project managers in the construction industry. There is currently a big span in the way Swedish construction companies plan the pre-project phase and the aim of this thesis is to present a more generic and standardized way that helps minimize project risks and maximize efficiency and profit. The result is a generic model which can be used in pre-project planning. The model describes the phases in the preproject planning process and the activities that span these phases. Is also describes the categories of professions that need to participate in the preproject planning group and which activities that each profession executes. The other result is a list of factors that need to be considered for a well performed pre-project phase, as found during the interviews. Among others the thesis stresses the importance of involving the client as a key participant in the process.

The society strives for sustainable development, in the construction industry it is expressed through sustainable building. Energy and LCC analyzes increases the ability to make conscious decisions in the process. A problem in the construction industry is that energy and LCC analysis is not used to the desired extent, as they are perceived as complicated and time consuming. The report aims to achieve a more sustainable building through increased use of energy and LCC analyzes.The goal is to show how BIM can be used to improve the efficiency of the energy and LCC analyzes.The study was conducted with a literature review and a case study to answer which information that is required in a BIM model to perform energy and LCC analyzes. The study also shows which software can be used in BIM based energy and LCC analyzes and how the analyzes can be carried out efficiently.The result shows that effective analyzes may be performed if the BIM-model contains the relevant information for making analyzes.

Because society?s demand for quality, efficiency at low cost is constantly increasing, companies are increasingly choosing to invest new methods to achieve these points. Those who manage to find ways to improve their processes are often the companies that have the greatest chance of becoming a winning player in the market. BIM is a new method that can reduce the internal costs while increasing communications between different parties. However there is disagreement about what BIM is and its purpose.

Understanding how innovation and renewal occurs in an industry is important for how to manage technical development for individual companies. It is also important for creating a beneficial industrial context for renewal, from both a political and an industrial perspective, in which new solutions can arise and spread through the involvement of several actors of the industry. How innovation and renewal occurs in the construction industry in Sweden is however viewed differently. One challenge that has been pointed to is that most of the work performed in the construction industry is organized in projects, which in turn should affect how innovation and renewal can be achieved. The aim of this thesis is to provide an understanding of how the project organizing in the industry affects innovation and renewal. This is executed through a case study of the construction of Skandionkliniken, a proton therapy clinic, and by using an industrial network theory that challenges the traditional view of how innovation is achieved.

The Swedish boat industry is considered quite conservative and subject to only limited development. The purpose of the study is to explain the structure of the boat industry, to analyze and evaluate ways of competing and provide recommendations for developing a competitive strategy. The aim of this thesis is to explain how to be competitive in the Swedish boat industry. To be able to do so three areas are used to deepen as well as broaden the understanding. The three areas within competitiveness we have chosen to highlight are differentiation, individualization and distribution.

This report investigates the possibility to use non-petroleum based adhesive (biobitumen) in asphalt. The main reasons for replacing bitumen are the fact that oil prices are rising, the threat of peak oil and the fact that the asphalt industry is becoming more environmentally friendly.The main purpose of this report is to investigate whether there are any non-petroleum based adhesives on the market. If so, how can they be used? The questions covered are:? Are there any other alternative asphalt coatings available?? Can bio-oils be used in asphalt?? If the bio-oils can be used, what are the details their properties?? How does a cold climate affect the bio binders?? What is the Swedish asphalt industry?s opinion about bio asphalt?The project was concluded through literature studies, consultations with people in the asphalt industry and through several interviews.The conclusion of this report is that there are some existing non-petroleum based adhesives on the market. They are mainly used for bike paths, sidewalks and parkareas.

Background: The global responsibility for multinational companies is a current matter of subject. Now when the world increasingly is getting globalized, economic growth is created, which brings a bigger demand of responsibility on companies. The leading companies from every industry is often becoming the frame for how the production process works and is therefore exposed to outer pressure which, for example, is coming from consumers and the media. Since consumers at present are more aware of what they are buying and where it comes from, it is important that the companies take social responsibility. We have therefore studied three big companies within the clothing industry to see in witch way they are taking their social responsibility.Purpose: Our purpose was to explore how companies within the clothing industry describe their work with Corporate Social Responsibility, code of conducts and where the incentive behind this work is coming from.Method: We have, through a qualitative study, examined how three large companies work with Corporate Social Responsibility.

During the last 20 years, the Swedish health care system has faced major changes. One of them is the increasing pressure to generate economic profit due to private businesses entering the market. Health care units are forced to make some structural changes in order to become effective and efficient. As a result merger and acquisitions has become a part of the health care sector, and seems to be an increasing phenomenon. Mergers and acquisitions have mainly been studied in the industry.

The name of the thesis is?Istheprintedbook?sdeaththeauthorsbread??Astudyinhowthepublishinghouses?andtheauthors?relationshipschangeduetotheintroductionofthee--?book?Thee--?book,whichisadigitalcopyoftheprintedbook,hasbeenonthemarketforovertwodecades.However,itisnotuntilnowthatchangesarehappeningwithintheindustry,whichaffectsthedifferentactors.Amazonhasforexamplelaunchedane--?readerbythenameKindleonthemarketandApplehaslaunchedasurfpadbythenameiPad,bothwhichyouareabletoreade--?bookson.Thetechnologicalchangesthatarehappeningaffecttheactorswithinthebookindustryaswellasthestructureoftheindustry.Theresearchquestionofthisthesisis?owdothepublishinghouses?andtheauthors?relationshipswithinthebookindustrychangeduetotheintroductionofthee--?book??Actor--?networktheoryisusedtoinvestigatethis.Thetheoryincludesbothhumanandnon--?humanactors,whichtogethercancreateanetwork.Theactorswithinthenetworkconnectthemselvestoeachotherandtherebyformthenetwork.Thepurposeofthisthesisistocreateanunderstandingforhowactorsandtheirrelationshipswithinanestablishedindustrystructureareaffectedbydigitalisation.Toachievethis,semi--?structuredinterviewswereconductedwithpublishinghousesandauthors.Theboomofthee--?bookinlargepartdependsuponthetechnicaldevelopmentthathasoccurredandwhichhasintroducedsmartphones,e--?readers,surfpadsetceteraonthemarket.Moreactorswillariseinthebookindustryduetothedigitalisation,whichinturnwillaffecttheexistingrelationshipsofthepublishinghousesandtheauthors.Thepublishinghouseswillkeeptheirroleinthenetworksasakeyplayer,butcomeintocontactwithmoreactors.Theauthorsaregiventhechancetoself--?publishtheirbooksase--?books,whichmakethemcomeintocontactwithmoreactorsaswell.Asmoreactorsarise,thestructurewithintheindustrybecomesrelaxed.Hence,thepublishinghousesneedtoenrolthenewactorsinorderforthemtokeeptheirpositioninthenetwork..

The construction industry is often criticized to be an industry of narrowness and slow of change. The traditional construction process is considered to create gasps of inferior quality, delays and increase of disputes. Meanwhile, productivity is lower compared to other industries and the prices are increasing. In this debate, it has been assumed that the reported figures are monitoring a reflection of reality, but there might be an error in the statistics which suggests that the focus is at the wrong place. A study of the monitoring and the measurements of the results are to consider, instead of spending time and resources on issues and actions The Last Planner System is an executive planning tool which creates a predictable workflow and creating value throughout all the different stages.

This paper argues that the food industry in general and the one taking place in Scania in particular, are disregarded in the official management of industrial preservation carried out in Sweden today. Despite the articulated ambition of a cultural heritage that as many as possible could identify with, the practice tend to create an industrial heritage based on stereotype ideas about the landscape in Sweden and the characteristics of industry. The way the open land of Scania differs from the traditional image of the appearance of Sweden, is used as one possible way to explain why the food industries of Scania are overseen in the management of industrial heritage. It is also argued that the high number of female employees might bee a reason why the food industries in general are given low priority in the practice of cultural heritage. By putting the Findus pea industry and the cultivated landscape that provides the factory with primary products against the official criteria for industrial memories, it is examined what values for preservation the food industry contain..

The core process is responsible for internal business development and is the process that runs through the organization and the results which creates a value for the customer. Some research suggests that identification of the client's conscious or unconscious needs clarifying the so-called core process in the organization and operations can thus be more effective. The study aims to identify and analyze the experience of the core process within child health care. The method has been interviews with nine managers and 10 clinic nurses in a county. The results show a lack of knowledge regarding core process and process work.

Problem: The relations between first and second tier suppliers within the automotive industry have changed drastically during recent years. Previously involving the supply of simple components, today the relation involves collaborative product development of complex subsystems. The situation is rather new for the actors, hence there are a number of problems that act as restraints for the collaboration. In order to come to terms with these problems, it is important to determine the underlying causes. Purpose: The purpose of this thesis is to make a survey of the main problems in the collaborative product development between first and second tier suppliers within the Swedish automotive industry.

Abstract One of the leading causes of food borne infections in the world is due to Salmonella by con-suming poultry products including eggs and meat. According to US Food and Drug Admin-istration (2009), 2 to 4 million cases of Salmonellosis in humans occur every year only in US. Salmonella causes wide range of diseases with enteric and typhoid fever, food poisoning, di-arrhea and gastro-enteritis. Many serotypes of Salmonella do not have host specificity and cause disease in all kinds of animals and humans. Salmonella has capability to modify accord-ing to the changing environment and it can develop resistance against routine elimination practices of sanitation, chemical treatments and antibacterial drugs. Newly established poultry industries in Pakistan are confronting various infectious diseases including Salmonellosis while in Sweden Salmonella prevalence in animal products con-sumed for humans is extremely low.

During the last two decades, temporary staffing has been the fastest growing industry in Sweden. The latest development within this industry is the integration of third-party providers of temporary staffing. Client organizations outsource the process of recruiting temporary workers to intermediaries with procurement management expertise. The concept is called Vendor Management Services (VMS) and aims to standardize decision-making and lower costs through improved efficiency. However, studies have shown that VMS intermediary functions have negative impact on placement matching.