AbstractIntroductionWedged shoe insoles are used as a treatment for different problems in order to change the ground reaction force. They can secondary cause different loading patterns under the foot compared to normal. No previous study has, to the author?s knowledge, clinically evaluated the plantar foot pressure with different full-length wedges in normal persons.PurposeThe purpose was to evaluate the plantar pressure with different degrees of full-length wedges in normal persons.MethodTwenty persons with normal feet have participated in this single blind study. Wedges were produced clinically in four different shapes, 3° valgus, 0° flat, 3° varus och 6° varus.

The objectives of this research were to determine whether the natural rattan resources in Sulawesi, Indonesia can cope with the strongly increased harvesting pressure that has occurred over the last centuries. I was furthermore looking for patterns in the rattan population dynamics that might give a hint on how the harvesting system could be improved to ensure a maximum sustainable yield. To answer these questions, I developed an individual-based model to analyse the dynamics of rattan growth in connection with rattan harvests by locals to identify sustainable levels of rattan harvests around villages in Sulawesi, Indonesia. Scenarios with different harvesting intensities were run to compare the change in harvest amount. For a given harvesting pressure, scenarios with a high number of harvesters and a low harvesting frequency had the same effect as scenarios with high harvesting frequencies and a low number of harvesters.

By our employer Camatec Industriteknik AB have we been given the assignment to continue with the previous work ?Design of strip feeder?. Our goal with this work is to come up with a design basis for a strip feeder.Functionally a strip feeder consists of two rollers which with the aid of the friction between the strip and the coating on the roller create a strip force that pulls the strip through the working progress.Demands on this project:? 10 ? 600 mm in strip width and 0,1-1 mm in strip thickness.? Minimum 30m/min in production speed.? A maximum strip force on 30-40 kN.? The cost of the strip feeder?s components is to be considered of economy and quality.The need of a strip feeder occurs when the coil doesn?t manage to feed or pull the strip before or after a working process. The strip can otherwise be exposed by a permanent yield deformation or a change in the strip material if it?s pulled trough the working process only by the on ? and of-coils.

The global climate-change means increasing mean-temperature and higher precipitation in Sweden, which leads to shorter periods of frozen ground in the forest. At the same time the harvesting machines are getting bigger and more powerful. The forest industry aim at an even wood flow, and the ground damage has to be as low as possible. The two biggest causes for ground-damage is the bearing capacity of the forest ground and the ground-pressure of the harvesting machines. The aim of this study was to find out some rules for the machine choice considering ground pressure, when harvesting on ground with low bearing capacity.A field study, using a Valmet 890.3 forwarder, was carried out where different ground pressures and their effect on the ground were tested on two different types of ground.Additionally, an inventory of damaged harvesting grounds was made.

In Uppsala CHP Plant, there are six pressure reducing valves to reduce the pressure from 15 to 3 bars, before six absorption heat pumps. During the process the energy is conserved but losses occur in form of exergy. The aim of this thesis is to reduce the losses of exergy. This can be done by letting turbines replace the pressure reducing valves.In this thesis an investigation has been done of the conditions today, the conditions after the change from pressure reducing valves to turbines and a comparison of three different types of turbine solutions. The three examined solutions are one turbine, several helical screw expanders and several small turbines in parallel with asynchronous generators.The six absorption heat pumps have been divided into two groups; one group of four and one group of two absorption heat pumps.

The Rya power plant in Borås produces district heating, district cooling and electricity. The plant is owned by Borås Energi och Miljö AB and is run by Dalkia Facility Management AB.In order to get the best heat exchange from the district hot water a pair of twin pumps and a turbine circuit pump are used as return pumps. Turbine circuit pumps are used to increase the pressure through the heat exchangers at the power plant. The pumps are in use when the flow is over 2 000 m3 h-1 and during the summer when re-cooling is used to improve the effectivens of the heat boilers.Since the pumps, that are parallel connected, rotating at a fixed rate per minute, the pressure is regulated with regulating valves. This report shows that during the 4,300 hours that the pumps where in use, energy corresponding to 590 MWh was wasted.

 The sawmill industry is a relative fragmented industry that is in an economic upswing andwith a hard competition. The customers have high demands on their suppliers and the highcustomer demand make it necessary for the companies to make a streamlining in planningand production. For that reason it is very important that the planning- and productionprocesses aren?t to complex and with a simple structure.The purpose of this report is to study and map out a marked out part of a planning- andproduction process, from adjust works to final delivery, at a company in the sawmill industry.Different methods have been used for the report, among others interviews and subordinatedmaterial.We have mapped out a marked out part of the planning- and production process at theCompany. This part we have studied, and we have analysed the process it self and otherthings connected to the process.We see the planning- and production process in the Company as complex.

Background: A health damage that has been specifically related to nursing is pressure ulcers. Pressure ulcers are a complication caused by disease, care and treatment and can result in great suffering for the patient. Pressure ulcers can affect people both physically and psychosocially and is experienced, by most patients, as a serious and unnecessary complication of care. Today there are hundreds of identified risk factors for pressure ulcers described that can be divided into patient and care-related risk factors. A successful pressure ulcer prevention and treatment is to reduce or eliminate the underlying causes for the development of pressure ulcers, prevent deterioration and to treat existing ulcers.

Background: Every year about 4600 nurses are examined in Sweden. The work as a nurse is responsible and she is often working under time pressure. Aim: To describe nurse?s understandings about her professional role during her first year after the examination. Method: Systematic literature review, where 10 scientific articles were examined.

The European Brown bear (Ursus arctos) has gone from basically being extinct in Sweden to, 2008 being estimated to a total of 3298 individuals. When looking at the new Swedish moose management system it is important to have an ecosystem-based approach and therefore include all the parts that moose impacts on and from in the management, especially the brown bear. Primarily in the spring and early summer the brown bear is a significant predator on moose calfs which must be taken into account in moose management. When the bear recolonize areas that it has previously been eradicated from, it will once again come in contact with people who are not accustomed to the bear's role in the ecosystem. We studied three groups of moose management areas with different predation by bears.

Krav om förbättrad spillvattenrening och städer som förgrenar sig över större områden är några av anledningarna till att dagens avloppsledningsnät får allt längre ledningssträckor. Att med gravitationens hjälp föra avloppsvatten framåt kräver ett kontinuerligt fall som vid långa avstånd kan innebära mycket schaktning, den ekonomiskt mest belastande delen vid nyinstallation av avloppsledningsnät. Ett fördelaktigt alternativ kan vara trycksatt avloppssystem, som sedan 70-talet har kompletterat de traditionella självfallssystem i kuperade och bergiga områden. På senare tid har trycksatt avloppsystem fått större användningsområde utanför sina etablerade bruksområden med anledning av skärpta krav på rening och kostnadseffektivitet. Självfallssystem är dock det mest använda avloppssystemet i urbana områden.

Climate changing is a growing problem for many countries and communities over the world. The cities has a huge work to deal with in their reforcements of their cities to be resilient ones. This thesis makes an effort to investigate and illuminate some of the problem the cities has to solve related to flooding, hazards, erosions, rising sea levels and crotches. This thesis will help to find solutions that international and national efforts has produced and handed out to each other. A lot of communities are charing their excellent tools that works for them.

Myxomatous mitral valve disease is a common disease in older dogs of small- to medium-size breeds. The mitral valve, and less commonly the tricuspid valve may be affected which causes them to leak blood from the ventricle to the atrium of the heart during systole. With increasing severity of mitral valve leakage the forward stroke volume ejected into the aorta decreases, which may lead to an increase in blood pressure in the pulmonary vein resulting in pulmonary edema. A decrease in cardiac output may lead to a decrease in blood pressure, but the body may respond in order to normalize the blood pressure. Franzén showed in 2007 that the systolic blood pressure was increased in dogs with severe mitral insufficiency.

This paper is an attempt to distinguish the specifics of the conflict resolution process and the negotiations during trade conflicts. First of all, this kind of conflict almost always contains some kind of protectionism which doesn?t make sense economically. Imposing trade-barriers decrease the overall welfare of your own nation and the only winner is the protected sector. These policies can be introduced since the political pressure from threatened industries is usually much stronger than the pressure from the consumers who will bear the burden of protectionism.

 The sawmill industry is a relative fragmented industry that is in an economic upswing andwith a hard competition. The customers have high demands on their suppliers and the highcustomer demand make it necessary for the companies to make a streamlining in planningand production. For that reason it is very important that the planning- and productionprocesses aren?t to complex and with a simple structure.The purpose of this report is to study and map out a marked out part of a planning- andproduction process, from adjust works to final delivery, at a company in the sawmill industry.Different methods have been used for the report, among others interviews and subordinatedmaterial.We have mapped out a marked out part of the planning- and production process at theCompany. This part we have studied, and we have analysed the process it self and otherthings connected to the process.We see the planning- and production process in the Company as complex.