The exhaust arrangement on a Scania V8 consists of one manifold at each bank connected to a twin entry turbine (8-2-2). A study in GT-Power has shown improved performance and reduced cylinder to cylinder variations using two manifolds at each bank in combination with a single entry turbine (8-4-1). This thesis work analyses the difference in performance shown in simulation and verify it by engine test.The initial work was focused on simulation in GT-Power. Investigating how exhaust manifold volume and pulses effects the turbine efficiency and the mean effective pressure during the gas exchange. To verify GT-Power simulations four engine tests with different exhaust arrangement have been made.The results from GT-Power simulation indicate that a larger exhaust volume improve the turbine efficiency.

The purpose of this paper is to analyze the driving forces and barriers which may exist at the implementation of green supply chain management (GSCM) within public organizations. Suggestions that may increase or reduce driving forces and barriers to public activities will also be provided, where such is found. The background of the study is that the public sector is such a major customer for many companies / providers, which makes the sector able to highly affect its suppliers. This essay is based on literature studies. The results showed that GSCM is a relatively unexplored area, especially applied on the public sector.

Resulting from anthropogenic carbon dioxide emissions, average surface seawater pH is estimated to decline from today's approximately 8.05 to between 7.78 and 8.03 towards 2100. For ionisable organic pollutants, changes in pH can lead to a change in the degree of ionisation, which could influence the ecotoxicity of a compound by altering its bioavailability. In this study, potential changes in ecotoxicity of ionisable organic compounds resulting from ocean acidification are examined. This is achieved partly by conducting a literature review, analysing existing literature that investigates this relationship. Potential changes are also evaluated by examining marine ecotoxicity data for ionisable organic compounds on the watch list pursuant to Directive 2008/105/EC of the European Parliament and of the Council, as well as on the list of priority substances according to the 2022 proposal for amending the Water Framework Directive (2000/60/EC).

Purpose: This study deals with warehouse management with an emphasis on vertical lift modules (VLM). The aim is to examine the effect of the implementation of VLM on a business's warehouse management. In order to obtain a result, the study has been based on the following questions:? How was the warehouse management designed before the implementation of VLM?? How is warehouse management designed after the implementation of VLM?Method: To be able to answer these questions, interviews with ten users of VLM performed. All users usually lift systems from the same manufacturer.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

As a student during my studies, I have been told about entrepreneurs who have red numbers in their financial statements, and there is a forest machine operator shortage in Sweden. The basic idea of this thesis was to examine the underlying factors that may have caused the problems described above. The aim of this thesis was to investigate the factors that create stress and job satisfaction as a forest machine operator. The study was performed as a comparison between forest companies own harvesting teams and entrepreneur teams to investigate if there are any differences in stress and job satisfaction between the two different types of team. The study was conducted in collaboration with SCA Skog. The material for this study was collected by doing interviews with SCA's harvesting teams. A total of 27 forest machine operators were interviewed, divided into a total of 10 separate harvesting teams. It was very similar between the different type of teams, which situations the operators experienced stress.

Recent developments suggest that private and public companies are moving towards a more service-oriented business. Service orientation means that hardware is often sold in packages with service agreements, which makes the investment more difficult to assess. The challenges that arise will be to assess the value of the overall package, the information needed to make informed decisions and the operational requirements in combination of hardware, software, support agreements, training and more. The paper therefore aims to examine how decision makers can evaluate the benefits of these investments and obtain a stronger base to make better decisions. There is within the area of radiology in the region of Västra Götaland a pronounced need for a better flow of information regarding medical equipment and related service agreements.

The purpose of this thesis is to examine how investments are justified in the Swedish data center industry, with a focus on cooling equipment. This is achieved through semi-structured interviews with 20 different interviewees. These interviewees represent different facets of the industry and facilitate an understanding of which factors, such as: investment costs, operating costs, reliability, environmental impact and the influence of external and internal actors, come into play and to which degree they impact the investment decision-making process. The results show that primarily low operating cost in the form of low energy consumption is the driving factor when it comes to the procurement of new equipment. A lower environmental impact is a positive side-effect of lower energy consumption.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

The purpose of this work is to find out if the suctionvalve to the salivaejector for dental equipment in a simple way can be improved or if a new design is needed. The result of the examination of the suctionvalve shows that the friction between the piston and the seal is high and that this causes the valve in a few cases sheaves. The study concluded that only small changes in material or detail, improve the component..

This study aims to investigate how federations manage to balance the economies of scale through collaboration and autonomy. This is done through a case study on Länsförsäkringar. The lack of modern research on federations makes the federative structure an interesting field of study. Previous research has shown a general perception that an increased pressure on efficiency and economies of scale creates a stronger common unit that eventually creates an imbalance in the federation. It is therefore interesting to look at the balance, which exists between the member units and the common unit of a federation.

The aim of this bachelor thesis has been to investigate some of the materials present in and onprinted papers which might be suitable for analysis. A brief history of paper making and somepigments were studied after which the theory of some of the available methods for technicalanalysis were summarized. Two works of art on paper were chosen for a closer examination,both are woodblock prints but of different composition and origin. The investigation wasmade to exemplify some of the common techniques applied on works of art. There were twoaims in these examinations.

The purpose of this Master thesis is to examine whether the term elasticity is relevant and functional to apply to public library organisations. Another aim of the thesis is to relate the term elasticity to public library organisations in a network society. Sociologist Manuel Castells provide the theoretical framework on the network society. Three investigations (meant to complement each other) in two Swedish public libraries seek to give answers to these questions.To be able to examine which areas of public library activity are elastic, I make a rough definition of what public library organisations consist of ? nine activity fields are identified using IFLA?s guidelines in combination with Swedish law of public libraries.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.