During the latter half of the 18th century, when concrete started seeing general use in modern cities, the use of different methods to give the concrete a finished surface texture saw use. One of these was using different methods of mechanically altering the surface using a slew of cutting and crushing techniques with mallet and chisel. This was done in order to hide the often dull and gray look of concrete, and allude to other more expensive and luxurious stones. The work would possibly have been done by experienced stonemasons, using much of the same techniques and tools they would have used while working natural stones. Or did they? This essay explores, through the use of traditional handcrafts and tools, the claim that the working of concrete surfaces can be done with the same tools and skillset as the working of natural stone.

This report provides a comparison between the products cellular concrete, foam concrete and LECA concrete. The questions to be answered during the work is how the cellular concrete stands up in cost terms to the existing competitors on the market, how the concrete products differ in design work, and in which situations the concrete varieties are preferred to use.Cellular concrete is a variant of ordinary concrete, with the difference that the ballast is exchanged from stone materials to expanded polystyrene beads (EPS). This substitution gives a product with higher insulation values but lower weight than ordinary concrete.The work was carried out by designing a survey which was sent to two hundred randomly chosen companies across Sweden, to see the building industry?s opinion of the product cellular concrete. The survey showed that cellular concrete was equals its competitors in terms of price, while the product was said to be more flexible, quicker and easier to cast.Then some of the companies, who participated in the survey, were interviewed to see more carefully, how the price, the workmanship and the time for casting and dehydration differed between the products.

Granskande av ritningar, tidsplaner och kalkyler för referensprojektet Hus N i Växjö har hjälpt oss kartlägga skalväggars för- och nackdelar. Från intervjuer har vi sedan kunnat se liknelser och skillnader om vad olika yrkesfolk i samma bransch tycker, sedan därifrån dragit slutsatser. Det är inte alltid enkelt att avgöra vilken byggnadsmetod som är att föredra för att projektet ska vara kostnadseffektivt, prefabricerat eller platsbyggd. Faktorer som byggnadens konstruktion, årstid, arbetsmiljö, resurser, tid och kostnad ska ta hänsyns till.Genom att planera bättre, öka förtillverkningen, skapa en bättre samverkan mellan byggherrar, konsulter, entreprenörer, underentreprenörer och materialleverantörer, så anser man allmänt att man kan öka industrialiseringen av byggandet. Då man kan få kortare byggtider och lägre totalkostnader. .

In conjunction with today?s increasing competition within the construction sector, more pressure is being placed on building contractors. Efficiency and improvements are necessary but without impairment to an ergonomic and safe construction site. This in is in order to reduce the construction costs and time but to retain the ability to deliver a high-quality contract.Various methods and prefabrication degrees are used, depending on the project's requirements and conditions. This analysis sets out to investigate and exhibit what qualifications are important when choosing a construction method for curtain walls.Advantages and disadvantages with each method have been analyzed and recommendations have been given to show when different methods are best suited.

The Results of this thesis was the creation of two designed house variants with a module toall the apartments. In addition till the first module there are three other modules ofapartments that can be put in the houses if it so needs. The house are volume prefabricatedand are placed on site in a way that it create an enclosure of the area which faces against thenature and car parks also lies hidden behind these houses.For the actual structure, a cross beam was created to carry the floor above and it is supportby all four walls. The structure between the first and the second floor has no "syll" butinstead there are two differently alternative to linking the floors in order so that it will notmove. The reason with this solution was that there will not be any subsidence when theforces from above are pressed down ward.

Concrete is a very common construction material. It´s characteristics are strength, durability and formablility. Superplasticizer is a common admixture, which changes the properties of concrete. Today (spring 2007) there are no certian mathematical methods to calculate the required percentage of this admixture needed to give the necessary set slump flow in the overall concrete recipe. Concrete batching companies must therefor experiment with different amount of superplasticizer in order to meet the specified slump and strength. The purpose og this report is to investigate if any mathematical relation can be established between the amount of superplasticizer used and the slump flow achieved. After carrying out some practical experiments using four different superplasticizers a direct relationship can be establish between the percentage of admixture used and the slump/flowability achieved. Unfortunatly at present due to the numerous variables, the calculation of mathematical formula can not be achieved..

Lime Hempcrete consists of lime, water and hemp and creates an insulating, sound-absorbing, lightweight and environmentally friendly material that can be used in wall, roof and floor structures (Bevan & Woolley 2008). This construction method is not yet developed in Sweden as there has been a ban on the cultivation of the hemp plant. This ban on the cultivation of hemp was removed in 2003, when the material got a boost. You can use it in many different ways and not just in the construction industry (Ahlsten, 2010).In this study we have investigated the possibility to produce prefabricated wall elements of LHC. We have also studied its mechanical properties and dehydration time.

Since 1 January 2010 it is a requirement to use the European standards, Eurocodes, in Sweden when constructing bridges. One chapter that has caused an extra amount of problems for the engineers is the one about fatigue analysis, which resulted in us doing this thesis.To do this we had to read all of the Eurocodes that direct, or indirect deals with fatigue and calculating of such. We have read the background documents for the Eurocodes and master?s thesis in the subject. We also studied the calculations of bridges constructed by different construction firms.We have chosen to limit the thesis to discuss only road bridges made of concrete due to the lack of method for verification of concrete in the national appendix.

A prefabricated timber frame house previously built by Villafabriken AB has been modeled in Autodesk Revit Architectural, a 3D-program based on BIM-technology. This has been done tosee if it?s possible to produce the publications that Villafabriken demands from the designengineer?s work, and examine which possible extra values that may arise compared to traditional 2D-CAD drawing.BIM is short for Building Information Modeling. Everything is stored in a single database and a change in the project file is automatically updated across the project. BIM provides more than just drawings since information from the model can be retrieved in various ways such as lists and quantity schedules.It was possible to produce the publications that Villafabriken demanded using Revit, but BIM doesn?t only mean a new way of drawing, it also require a change in the company?s process were the information from the model is being used..

A common way to stabilize high rise buildings is to use an elevator core built of concrete. Today, we use to build these elevator cores of in-situ concrete. Precast concrete twin wall (double wall) is a semi-finished product that has become more common in recent years. This diploma work studies how the twin wall works out as structural elements in an elevator core. The work also shows some possible ways of designing twin walls and highlights some important parts of the design that will be vital to the stability of the building.    The result shows that it is important to think through where the element joints should be placed.

This is a booklet with information and inspiration about precast retaining walls. The three chapters contain information about concrete as a material, how the surface of the wall can be altered, and a chapter with ideas for a new precast wall. I have obtained information through books, interviews, lectures and fairs. The retaining walls on the market do not correspond to the requirements of the Landscape Architects I have interviewed. I have therefore considered their opinions in the chapter containing my new ideas for new retaining walls.

During recent years, the trend of Swedish students? negative performance and results in mathematics has been discussed. It is agreed that a change in teaching methods is necessary in order to solve this issue. Thus we found it interesting to take a closer look at an alternative way of teaching. The purpose of this study was to find out what teachers and students associate concrete mathematics with and make a comparison between them.

Within all industries, there is a change in working time required; this also includes the construction sector. However, the way construction sectors are differentiated is by not having been given the opportunity to be practiced or tested.  The aim of this thesis that we have done in collaboration with the Concrete Industry was to investigate the possibility of developing an automated method for quality assurance of SKB at the site. The idea is to make the O-funnel to be more utilized and therefore ensuring that the appropriate concrete quality is provided which eventually would lead to a better development in the production process.The project has involved theoretical work and laboratory experiments. The theoretical work gave us a good foundation at the beginning of the project. After gathering the information and material, the laboratory experiments began by SCC in their laboratory in Hammarby. The collected data from the various laboratory tests formed the foundation for trying to relate measurements for consistency of SCC with each other and therefore find out how measurements from O-funnel varies with different concrete mixtures.

The purpose with this project is to explore and verify three renovating systems for Miljonprogrammet (common expression forbuildings constructed during the years 1965-1975 when over a million houses where built in Sweden) to take measure to thelargely transmission losses of these buildings. Many of the buildings from this period have similar constructions and thereforethe same techniques can be used to renovate several of them. This project only considers the climate scale, although thereare many more factors to concern for to efficient the buildings of Miljonprogrammet.This thesis presents examples of renovations carried out using two of the three renovation systems.The essay presents a reference house of choice on which we apply the three systems and calculate the new U-values,consumption of energy and the investment costs. The new U-values the building is given is matched to the values ofrecommendation for passive houses. Our reference house is a two story apartment building, located in the village ofLammhult, with brick facades at the ends and plaster at the long sides.

 The objective of this thesis is to examine the difference in workability in fresh concrete, when crushed fine aggregate replaces natural gravel. The shape of the fine aggregate,  packing and flow of six crushed material and three natural materials will be determined by easy studies, the results will be compared with a slump cone test..