During the last decennium climate issues have become more and more important. Many steps towards an adaption of efficient energy supply systems have been taken all around the world. These steps have been created to ensure the next generation?s energy demand. In EU and Sweden objectives have been set to ensure that the energy consumption decreases by 20% year 2020 and by 50% year 2050 compared with the energy consumption levels of year 1995.

The purpose of this of this essay is to explore the construction of a conservatory that is livable allyear around. When you build a conservatory there are several factors that need to be regardedthat usually are of no importance when you build a regular conservatory. The glassed facadeneeds to have a very good U-value and all the parts of the facade need to be isolated and theconstruction needs to prevent thermal bridges.In this essay we will start by looking at the shape of the conservatory. Due to the façade consistsof glass the conservatory will need to have a good ratio between the area and the façade so thatthe heat losses will be at a minimum. However, due to the fact that one of the sides of the façadeis connected to the warm house, you quickly realize that the shape of the conservatory is of noimportance.There are two common ways to build a foundation for a conservatory, a molded concretefoundation and isolated wooden beams.

The aim of this study was to investigate how seasonal variations affect the quality of logging residues. The study was hosted by VIDA Energy. Logging residues can be processed and transported within different systems. Today the dominant systems are chipping at landing and bulk transportation of logging residues. In these systems the handling of the logging residues are carried out in the same manner up to the landings. Moisture content at the time of chipping is the primary quality parameter. Fine fractions of logging residues are strongly dependent on moisture content in storage.

In this final thesis, an existing method for analysis of chlorophenols (CP) in bottom sediments has been updated and adjusted for analysis of chlorophenols in soil. The covalent bonds between the chlorophenols and the soil matrix were broken through basic hydrolysis and the chlorophenols were then separated from the water phase through addition of sulphuric acid followed by ether extraction. The chromatography was improved through extractive acetylation of the chlorophenols.The updated method was then applied on soil samples from a contaminated area (a former sawmill in Hyttsjö, Östergötland, Sweden).The analyse was preformed by GC/MS with respect to 2-MonoCP, 4-MonoCP, 2,4-DiCP, 2,6-DiCP, 2,4,6-TriCP, 2,3,4,6-TetraCP and pentachlorophenol (PCP).Contamination of chlorophenols in nature can be explained by the former use of wood preservative chemicals based on chlorophenols. In the 1960s and the 1970s these chemicals were used in Sweden, but due to their toxicity they were banned by the Swedish government in 1978.In Hyttsjö a pentachlorophenol-based product named Santobrite was used for several years. The concentration of PCP in the soil samples from Hyttsjö varied from 0.2->1.8 ng/mg dry substance.

An increased awareness about the global warming has created a demand for more information on how the climate is affected by different activities.This master thesis was initiated by Tricorona, a Swedish company that offers its customers analysis and calculation of their climate impact. Tricorona also supplies climate neutralisation with CERs, in accordance with the Kyoto protocol and controlled by the UN. This work demands updated emission factors for greenhouse gases. An emission factor gives information about the greenhouse gasintensity of a service or a product [kg CO2-eq./ functional unit].The purpose of this thesis is to examine how electricity, district heating, hotels, taxis, food and materials affect the climate and how emission factors for these areas can be calculated.This was done by reviewing and comparing different studies and by interviewing experts. The information was evaluated and recommendations on calculations and emission factors were made.The consumption of energy is the main source of greenhouse gas emissions for district heating, electricity, hotels, taxis and materials.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorsprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2013:12.

The objective of this study was to contribute with suggestions of nature preservation managements of selected forest objects of high nature values managed by the Swedish state-owned forest company Sveaskog. Many forests with high natural potential are relatively rare today due to modern forestry, where wood production is the main purpose. Sveaskog?s policy is to consider and to priority nature conservation on valuable objects. This assessment includes objects that in the future may develop into nature reserves.

To fulfill the climate target that EU and the Swedish government have decided to apply, it becomes increasingly important that the energy efficiency of existing buildings and making new buildings energy efficient as possible. Of Sweden?s total energy consumption in 2011 was 40% used by residential and service. Of the 40% of the energy consumption was 60% used for heating and domestic hot water. A report from year 2012 shows that one reason why the heating volume is so great could be due to underestimating on the energy consumption for the heating in the planning of the building.

Illegal logging and its related trade is of great concern around the world. The European Union Timber Regulation (EUTR) is a regulatory approach by the EU to prevent illegal timber and timber products to be placed on the European Union inner market. This means the regulation affects both actors in the member countries as well as the actors exporting timber and timber products to the EU from non EU member countries. This study aims to study the implementation process of the EUTR in Bosnia and Herzegovina (B-H), and its preconditions. Institutional theory is used to understand and explain how the EUTR affects B-H organisations? business environment, and how the organisations choose to respond to the EUTR.

The industrial sector accounts for a large share of greenhouse gas emissions. To reduce its negative impact on the environment is crucial in the quest for a sustainable future. In discussions of the industrial sector's impact on the environment guidelines have been highlighted as a tool to assist the industries in their efforts to change the relationship between the consumption of energy and production. This by improving energy efficiency and a shift to the best available technology. During the past 30 years the steel industry has reduced its energy consumption per ton of steel produced by 50 percent.

The main project Dry preservation of food waste from households includes a new technique concerning drying and storage of dried biowaste as well as a study of the sorting of household waste and further usage of the dried biowaste. A question asked in the project is, can the dried biowaste be used as a soil amendment? If organic waste is used as a soil amendment, precaution concerning hygienic safety risks has to be accounted for. The objective of this M. Sc.

In January 2005 the emission allowance system was introduced within the European Union and the first period ends at the end of 2007. The system was introduced in order to decrease the wastes of carbon dioxide and the system is a part of ratifying the Kyoto ?protocol which first period runs between 2008-2012.The idea of the system is to reduce the wastes of carbon dioxide where it costs less to do so and the expenses for the society therefore are as diminutive as possible. Different theories explain that companies can benefit from environment legislation and can depending on the company?s attitude gain competitive advantages improve its productivity and thereby increase its profitability.With this in mind, the study aims at examining how the introduction of the emission trade system has influenced Swedish smaller companies in the distant heating industry, with focus on the factors attitude, innovation, competition and profitability.

Hårdgörning av trä syftar till att göra materialet hårdare. Detta går att åstadkomma genom komprimering, det komprimerade materialet tenderar dock att återgå mot sin ursprungsform då materialet utsätts för fukt om ingen låsning sker. Låsningen kan ske mekaniskt i en treskiktskonstruktion som motverkar träets fuktrörelser. Dessa skivor har dock visat sig vara instabila och tidigare försök har uppvisat deformationer i form av kupning. Denna undersökning syftar till att utreda förutsättningarna för att använda komprimerad asp samt att ta fram underlag för framtagning av en kommersiell produkt.Praktiska tester har genomförts för att studera hårdhet, återfjädring och densitet hos det komprimerade virket.

Efficient energy use in restaurantsUmeå Municipality wishes to combine energy issues with food control, and thus help restaurants to become more energy efficient. During March and April 2010, I visited seven restaurants and interviewed restaurant personnel about current state and application of kitchen appliances, using a checklist to make sure that the same questions were asked at all restaurants. The restaurants were all different sizes and offered different kinds of food. The study mostly focuses on energy efficiency by behaviour and not on location or technology. Almost every restaurant that was visited had the potential to improve in one or more areas, such as kitchen appliances, lamps and lighting fixtures, heating, cooling and ventilation.

This thesis examines a possible control strategy to minimize flow fluctuations in Uppsala?s district heating system. High variations in flow rate may lead to complications caused by hydraulic constraints in the district heating system. These complications, such as inadequate pressure and temperature levels, increase the risk of heat delivery failures. It is therefore important to avoid such situations both for the producer and for the customers.Typically, the forward temperature is controlled by using a rough correlation with respect to the outdoor temperature.