The aim with this study was to investigate mortality in older respectively younger beech stands (Fagus sylvatica), the different types of dead wood in the forest and the availability of coarse woody debris (CWD). The research was carried out in previously managed and seminatural stands in Biskopstorp and Frodeparken, located north of Halinstad in Halland,Sweden. Data were collected from 22 stands with at least 50 % beech and with a minimum age of 5 1 years, ranging in size from 0,67 to 19,9 ha. A transect was placed in each stand, in which the diaineter on both dead and living trees with a minimum diameter of 50 mm was recorded. On seven to 13 dead trees, depending on the size of each stand, decomposition stage, primary and secondary cause of death, amount of fungi and the type of the dead wood was noted.

The objective of this thesis was to investigate what influence nature conservation measures taken at regeneration felling. Factors analysed were the forest owners´ situation and their characters, and information activities from wood-suppliers and the Regional Forest Board (RFB). The inventory was performed with a posted questionnaire followed up by telephone to forest owners and a posted questionnaire to wood-buyers. The forest owners were grouped in three strata, depending on the quality results (D- polytax inventory) of the taken forest conservation measures, and for this investigation forest owners were sampled from the population in the tree groups. In total 73 % (41/56) of the sampled forest owners answered the questionnaire Group A (17 answers): Good judgement Group B (19 answers): Bad judgement Group C (5 answers): This group was formed from the forest owners that were informed, by RFB, about nature conservation measures and culture history consideration before the regeneration cutting.

Nature conservation on certified small private forest owners- a comparison between the two certification systems FSC and PEFC in southern Sweden Today two different certification systems are used in Sweden to certify forest, FSC (Forest Stewardship Council) and PEFC (Pan European Forest Certification). During the last years certification of forests in general and different certification systems have frequently been debated. FSC is a globally widespread system and about 10 million ha out of 23 million ha Swedish forest is FSC-certified. The FSC-standard is mainly used by major forest companies and to some extent also by smaller private forest owners. PEFC is a European system and about 2 million ha Swedish forests is PEFC-certified today.

AbstractThe Municipality Council decided in 2010 to develop a comprehensive energy efficiency strategy with financial and methodological support from Energimyndigheten (The Swedish Energy Agency). The strategy should include 3 major parts: an inventory of the 2009 energy use defining the current situation, the 2014 and 2020 goals for energy use, and an action plan for goal achievements. According to Energimyndigheten, the strategy must include all municipal administration premises, vehicles, and all majority-owned companies (as Laholmshem, the municipal housing company).The report describes the inventory work in order to obtain the 2009 energy use and the sources of information used. The inventory values are used as the base year values for the 2014 and 2020 goals. The inventory showed that information about the vehicles is dispersed in the municipal administration and no clear structure exists with respect to mileage and fuels used.

I have chosen in this work to examine which factors are affecting the artificially creation of a tree cavity containing decomposed wood. The purpose of the work is to find out which factors are affecting the most when a tree cavity is created, and to apply these results when you artificially try to create a tree cavity. The need to create tree cavities comes from the situation where many tree cavity living beetles finds themselves today. When existing trees are to pass out there will be no suitable inheritors yet. The work was initially to focus on cavities created from cut branches.

Today there is a widespread opinion that the woodmarket and the forest industry are dominated by a traditional way of thinking and not adapted to the customers of today; a lot of products are produced purely on routine. Also, there is a demand for improving the quality of sawn woodproducts. AB Karl Hedin wants to sort this out by increasingly adapt their products to the demands of the market, i.e. through introducing a short wallstud of standard length, "Hedinregeln". At tirst, the wallstud will be produced in lengths of 2,70 m and of guaranteed quality.

In June 2006 the Swedish government decided that the use of energy in buildings should be reduced by 20 percent until 2020, compared to the level of energy used in 1995. To contribute to this goal, the real estate company ?Eskilstuna Kommunfastigheter AB?, set up own goals for their buildings. In 2009, the goal for schools was to have a maximum energy use of 118 kWh/m2year for heating and hot water.The school ?Hållsta skola?, just south of Eskilstuna, exceeds the limit since it used 270 kWh in 2008.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

AbstractThe dependency of fossil fuels in the transport sector causes large emissions of carbondioxide. This problem can we reduce by using vehicle gas from digested solid manure and leftover of pasture. I have studied the potential for this in the county of Västernorrland. Thepurpose is to investigate how much vehicle gas that can be extracted.One central, large scale digestion and upgrade plant should be placed in Härnösand. Theamount of pasture and manure that is economical and practical available is enough to produce2,7-3,5 millions Nm3 vehicle gas.

The aim of this study was to develop a load prognosis model for Uppsala district heating system to be used as a tool for heat production optimization. The methodwas to build three models for the different customer types; housing, industry andoffices and then scale them for the total system using data from Uppsala districtheating system. The heat load consists of two parts, one that is temperaturedependent and one that is dependent of the social behavior of the customers. Thetemperature part was modelled with an ARX model using an outdoor temperatureprognosis as input signal. The social behavior part was modelled using the mean ofthe social behavior from some days before and additionally by distinguishing betweenweekdays and weekends.

Moisture damage in buildings is a serious issue that leads to problematic consequences and high economic costs. Despite the knowledge and awareness existing about moisture problems, extensive damager still occurs today. Studies of moisture in the exterior wall constructions shows that the issue if often caused by rain and water intrusion. These kinds of problem result in major costs usually because the companies have to replace the material and structural components and also in some cases tear down large parts of the buildings.The work includes moisture theory and descriptions of four different exterior wall constructions, wood stud wall with plastered facade, exterior wall with wood facade, exterior wall with concrete, and exterior wall with brick facade. Our thesis work describes how the constructions are affected and moisture damage due to water intrusion.

Uppsats för avläggande av filosofie masterexamen i kulturvård, 30 hp.

Long transport of products is an environmental issue discussed to an increasing extent. The consumers are increasingly aware of how far our comestibles really have been transported. The increasing levels of environmental emissions are something that concerns people. The question is nevertheless delicate and many choose to ignore it. This is no longer an option.

Today?s forest managers implement a large number of methods to increase the amount of dead wood in Swedish forests. They use everything from high cutting of trees to girdling trees and burning forests. However, implementation of these measures without proper knowledge of their consequences is a common problem. This study has been performed to increase knowledge about two of these measures, girdling and high cutting, and how these actions affect the number of wood-living insects living on dead trees.

The examination of the adequate nature conservation methods in a natural reserve, to conserve a specific species and / or increase biological diversity is the subject of this study. This work is based on four species, that can be found during the Spring season, liverleaf, wood anemone, brimstone and woodpecker. The incidence and availability is studied and closely observed for these species in twenty forests, i.e. ten forests which are nature reserves and ten forests with the similar characteristics as the nature reserves habitat, but are not nature reserves in Gnesta mucipality, Södermanland. Measurements of the tree crown and the diameter of the tree trunks where noted to study how these factors could affect the outcome of the abundance and incidence of the four species.