In this thesis a number of energy saving methods for a multiplier on algorithmic level are investigated. For the investigation a multiplier is constructed in VHDL, after which the circuit's performance is investigated. A number of techniques for reduced power consumption are introduced in the circuit and are then evaluated. The conclusions are that all investigated methods, pipelining, interleaving and voltage scaling, should be maximally made use of in order to minimize the power consumption..

Can the Danish "Aftalesystemet", a system with the intention to simplify the use of services within health care, be used in Sweden? This project has investigated the possibility by installing and testing the system and explored its functions to detect any eventual problems. Analyses were made of the system's graphical part and the underlying code to see in greater detail how the communication between units occurred, since no actual documentation of it existed. Discussions with the developers took place regarding how the current system works and how further development should continue. In order to test the system, a completely virtual environment was used.

Wind power in Sweden is expanding in response to the government's decision that 49% of Sweden's power should originate from renewable energy sources by the year 2020. Problems with noise and sound emissions related to wind turbines are a constant argument against the wind power expansion and this paper means to examine if vertical axis wind turbines might be a viable alternative to the conventional horizontal design for noise sensitive areas. In order to determine factors like difference in frequency, noise propagation and noise emission level, measurements of both horizontal and vertical axis wind turbines have been completed and the data analyzed with MATLAB. It is shown that there is a difference in how the noise from the two types of turbines propagates due to avariation in the frequency spectra of the emitted sound. It is also shown that vertical axis wind turbines generate a lower sound emission with less intensity inthe lower frequencies..

Sekretessbelagd.

Detta examensarbete har genomförts vid Mälarenergi Elnät AB i Västerås. Undersökningen föranleddes av regeringsbeslutet om att elmätare måste avläsas en gång per månad från 2009. Konsekvensen för Mälarenergi är att de måste investera i ett automatiskt mätinsamlingssystem. Syftet med projektet har varit att skapa en generell investeringsmodell för att ekonomiskt utvärdera ett antal mätinsamlingssystem. I rapporten har Milabs, Seneas, Enermets, HM Powers, Iprobes samt Techems och Viterras system analyserats.

Business Process Modelling Notation (BPMN) is a way to graphically draw a diagram of a business process. A BPMN diagram consists of several so-called flow objects. These are interconnected in the graph through sequence  flows. BPMN models are merely graphical representations of business process and there is a need to simulate these diagrams for different purposes. The simulation that now is available for BPMN is that the model is evaluated by checking if it is correct.

This paper thoroughly investigates needs and requirements for overhead distribution feeder inspection and develops models to investigate possible relations between short term inspections remarks and outages. The study was conducted in collaboration with Fortum Distribution AB that supplied extensive information about their overhead power feeders concerning both inspection and power outages. The investigated models where lognormal linear model, Poisson generalized linear model and negative binomial generalized linear model. All models were implemented utilizing offset terms to compensate for differences in feeder length and amount of overhead versus underground feeders. The Poisson generalized linear model was rejected at an early stage due to overdispersion and neither of the remaining models fit the data perfectly.

Every year new premises are built in Sweden, and even if they are made as energy efficient as possible, this will not reduce the energy demands, but the rate of the increase of the energy use will be reduced. One type of facility in Sweden that is a major energy user is public baths, and this makes public baths an interesting facility to study more closely. There are around 500 public baths in Sweden and about 75 % of those can be seen as older baths with large need of renovation, and they all require a high level of energy efficiency measures. To show how the energy demand increase or decrease depending on the changes chosen to be made, the simulation application IDA Indoor Climate and Energy was used. Simulations were made and compared for several cases, with two extreme cases as starting points.

Everyone has to take a greater responsibility in energy issues, both individuals and companies. There have been some major developments in the construction industry but there is still a lot to be done. This diploma work thesis presents different methods of making existing construction shed establishments to use less energy. What is possible to do and how much energy is there to be saved? A shed establishment consisting of 8 shed units were studied in this project and the building simulation tool VIP-Energy was used to simulate different types of material in the sheds. An infrared camera was used to locate thermal bridges. There are several factors that can be improved to make a construction shed establishment to use less energy.

My main purpose with this study is to investigate how the social worker relates to knowledge, power and profession. From this purpose has also the concept ?to be a social worker? emerged.The study is based on a qualitative study and consists of semi-structured interviews with seven social workers from different fields of expertise.The result of the study shows that the knowledge is dependent of different fields of expertise. But in the contact with the client, regardless of field of expertise, the knowledge is gathered through a reflective pattern. Through theoretical attempts and earlier experience from social workers, this is brought to life in this unique meeting.

Den här rapporten har som syfte att utreda vilket eldistributionssystem för offshoreenheter som sparar mest vikt och utrymme. De två elsystem som jämförs är GVAs standard system och Siemens Blue Drive System. Rapporten innehåller en teoretisk bakgrund för båda systemen och dimensionering av systemens kraftkablar samt beräkning av kabelvikter och komponentvikten för systemen. För att uppskatta kabel- rutter och längder kommer ritningsunderlag för GVAs offshoreenhet 7500 att användas.Resultatet visar att GVAs standard system är det eldistributionssystem som har den lägsta totalvikten med 168 ton, GVAs standard system har en vikt som är 101 ton lägre än Siemens Blue Drive System som har en vikt på är 269 ton. GVAs standard system har en lägre ström vilket gör att ledararean blir mindre och i med det blir kabelvikten mindre.

When Deng Xiaoping introduced his reform program, he began China's transition from a plan economy to a socialist market economy. Liberal theorists often argue that there is an automatic link between ?free market? and ?democracy?, however this link is not evident in China. This contradiction constitutes the problem area of this thesis.With a theoretical framework containing ?totalitarism? and ?Tang Tsous culturalist approach? I have analysed the leadership of CCP (China's Communist Party) and its strategies to maintain the Chinese political system.

 This degree project aims at developing a concept for how to use solar energy to pump up water. The target audience is people living in areas where the functioning of the electricity and water network is absent. In these areas, the hand-powered water pump is the most common technology. The degree project's goal is to find an economically viable alternative to the time consuming hand-powered water pumps. The power comes from solar energy.

Today small metal parts are mass-produced as for example rollers in cylinder bearings. At high velocity cutting the metal is cut with a great force in a scissor-like device. Both precision and repeatability is important to be able to guarantee good quality, but from an economical point of view it is also important to keep a great manufacturing capacity. The part of the process that is most time consuming is when the metal bar, that is about to be cut, is fed to the right position. Therefore it is interesting to examine if the time used for positioning can be reduced.

The goal with this master thesis has been to evaluate and to examine the stationary resistance bridge. The resistance bridge uses a 4-point measuring to determinate the resistance, which is used in the manufacturing of the conductor. It is then used when the resistance is to be decided for coarser aluminium conductors. A conductor has to fulfil certain demands to be able to move forward in the process. One of these demands is the resistance in ohm/km, which has demands that the measure values of the resistance bridge are as true and precise as possible.