With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

The focus of this project has been on the drainage tank of the reheater on Ringhals 1. This tank has on two previous occasions received such a high water level that the system automatically emergency stopped. For this reason, events and various readings from these two occasions has been specifically studied and analyzed. In order to prove theories about what causes these problems a model of the system was created in the program Dymola. Using simulation results from the model, we have been able to demonstrate how the system's measured values should look likeunder normal conditions with respect to flows, pressures, temperatures, valve positions and water level in the drainage tank.

This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.

Nowadays, a lot of resources are spent on developing systems that will make it possible forvehicles to act autonomously, and make them more effective. One of the projects that isworking on this is the Gulliver Project. Gulliver has constructed a number of miniaturevehicles equipped with various sensors, to use as a physical testbed for autonomousdriving. One big disadvantage with this method is the long iteration time that occursduring the development and testing of a new software.This project has improved this process by developing a system architecture of a virtualtestbed where it is possible to simulate autonomus vehicles that communicates throughany type of wireless network. The testbed has made it possible to simulate autonomusvehicle systems that with a reasonable margin of error, acts like the system would actin a physical test.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

One of ABB Power Systems´s business areas is HVDC (High Voltage Direct Current) technology. HVDC is used for transmissions for both short and long distances. One of Power Systems?s products is called HVDC Light. HVDC Light is a relatively new technology for power transmission, but have before only been used for motor drives applications.

Hydropower is the largest renewable energy source available in today's society. Operation and production is handled by high-tech electronics. This thesis is done on behalf of Statkraft Sweden AB who wants to explore the possibility of replacing the hydraulic cylinder with an electric actuator, generally as well as a case of a small power station on the river Nissan. Whether it is the chaplain or francis turbine vanes are actuated by hydraulic cylinders. Because of Gustavsberg hydropower is inconstant operation, this report is based on power calculations, which are read and computed according to the available hydraulic diagram.

Fluids are important to the Visual Effects Industry but extremely hard to control and simulate because of the complexity of the governing equations. Fluid solvers can be divided into two categories, those of the Eulerian point of reference and those of the Lagrangian. Both categories have different advantages and weaknesses and hybrid methods are popular. This thesis examines Smoothed Particle Hydrodynamics, a Lagrangian method for physically based uid simulations. To allow the artist the exibility given by shorter simulation times and increased number of iterations, the performance of the solver is key.

Interest in the implementation of AGV-systems (Automated Guided Vehicle) has in recent decades increased. The reason is that it allows companies to perform reliably and secure internal transport while reducing the need of personnel. It is one of todays most advanced and complex material handling system that can independently make their own decisions regarding flow paths and traffic control. An AGV-system consists of transport units carrying cargo from point A to point B, and communicates using a computer.The purpose of this study is to develop a model on how to proceed in order to design an AGV system in heavy industry. The model is tested by a case study of a company in the metal industry to determine if the model works and gives the correct result.

This is a report written for an examination project C-level, on the subject of energy. The examination project is a product of the FVB Sweden AB (district heating bureau). It started with a meeting with Stefan Jonsson FVB Sweden AB, were he explained the content of the project, and from this a presentation of the problem was made. The problem that needed to be solved was how they could control the valves in the system to provide heating to everyone in the system. The valves are often oversized so the pump in the heating plant would have to be enormous to be able to provide enough flow to be sufficient, if everyone in the system had there valves fully opened. I came up with two solutions to the problem, one was a wireless network that could keep track of the valves and the other solution was an extra sensor that was placed on the radiator.

The aim of this research is to find out what environmental impact a wave power park has on the Swedish west coast by creating a consultation paper (?Samrådsunderlag?) for the Lysekilproject at Uppsala University. To highlight the complexity of the problem a system analytic approach was used and illustrated by a Causal Loop Diagram.The overall assessment of the Lysekilprojects wave power park at the Swedish west coast is that it will have a low impact on the environment. This is due to the relative small size of the wave power park and some technical solutions made with the environmental aspect in mind. Artificial reefs and a sanctuary for marine species are effects created by the wave power park and in the longer term the impact will give access to an untapped source of renewable energy, wave energy.

The debate on the future of Nuclear power in Sweden has increased with the discussion on global warming. The uncertainty of fossil fuel- and carbonprices the latest years has aroused considerable interest in Nuclear from power companies, industry and politicians. Nuclear power plants have negligible CO2 emissions and are not directly affected by increased price of emission rights and fossil fuels. The future power production needs to reduce its emissions of greenhouse gases to become sustainable. The purpose of this study is to examine the value for power producers to have the option to invest in Nuclear power and how a Nuclear power venture would affect future electricity prices. The study uses two methods, a traditional cash flow model and real option analysis, to estimate the value of Nuclear power.

This thesis treats the normative power of the European Union and its affect on Macedonia. The main purpose has been to look closer with the use of the application of Ian Manners theory of normative power on the Macedonian case. The focus will be to answer the following questions: Does the European Union act as a normative power in relation to Macedonia, if so, how are these values diffused? Has there been any effect of the spreading of these values? Based on six interviews and the available material of European Union strategies for the Macedonian membership I have attempted to understand to what extent the European Union?s normative power has had an influence in Macedonia. The result of my analysis is confirmation of the European Union as a normative power in Macedonia and the understanding of the methods of application..

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.