Sök:

Sökresultat:

3836 Uppsatser om Post-production - Sida 16 av 256

Födelsevikt och tidig tillväxt hos nyfödda lamm

Sheep production is the only animal production in Sweden that is increasing. Therefore,increasing knowledge of the production is of great interest. In order to run a viable sheepproduction, producers needs to be successful in the breeding of the animals and achievean economic surplus in the end. Lambs that are born healthy and vital have greaterconditions to perform high lamb weight gains and thus a successful production. Thereare many factors affect the survival, birth weight and early weight gain of the new bornlamb.

Flödesanalys av plåtsammansättning : Strävan mot Just-In-Time och minskat slöseri

The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

Korrektion och imitation som mätverktyg för diagnos av PT-nivå : Kan man korrigera eller imitera en grammatisk struktur som man inte kan producera i fri skriftlig produktion?

The purpose of this study was to examine whether a L2 learner could correct or imitate structures of the language that they could not produce in written production defined by processability theori levels.The Informants had Arabic as their mother tongue. The study showed that the ability of correction developed slower than the capacity for imitation and the ability to written production. The ability of the correction developed by the duration of the stay. The result was a confirmation of theory formation in processability theory. Corrective elicitering could be developed into a useful diagnostic tool in the classroom and thus provide an education that followed a natural learning order according to processability theory by Pienemann.Keywords: processability theori, imitation, correction, written production.

The Incentives Behind Capital Structure Decision - A Survey of the Swedish Market -

The aim of this thesis is to investigate which the main determinants of capital structure in Swedish listed firms are and to identify which incentives lies behind managers choice of capital structure determinants. Further, the study investigates whether the Post Keynesian theory and theories which incorporate behavioral aspects can be used to explain the capital structure decisions or if the traditional Neoclassical theory give an better explanation. We have used a qualitative method to analyze the determinants of capital structure and the managers incentives behind capital structure decision. We conducted a survey which was sent to 83 Chief Financial Managers and financial executives in Swedish firms listed on Mid Cap or Large Cap. The questionnaire was on-line which enabled for the respondents to quickly and convenient respond.

Optimering av OTEC-system

Ocean Thermal Energy Conversion, OTEC, is a sustainable energy conversion technology that is not yet commercialized. OTEC is a technology that utilizes the temperature difference in oceans between the warm surface water and the cold water at 1 000 m depth to run a Rankine Cycle. This technology can produce electricity and provide synergies like fresh water, air conditioning and aquaculture. A simulation program for three alternative OTEC systems has been created in order to decide which OTEC system is most profitable; closed, open or hybrid system. In this simulation a production cost analysis is performed in order to investigate and decide which one of the three systems that has the lowest production cost. The production cost analysis also analyzes if the profitability is affected by the size of the facility. After these analyzes, the most profitable of the three different OTEC-systems is expanded by an installation of solar collectors in order to see if the thermal efficiency is improved. The result shows that the most profitable system varies with the size of the facility.

Chatt och e-post : ett möte på folkbibliotekets publika datorer?

Ten years ago the public computers with Internet access were introduced in the public libraries. The purpose of the public computers was to give the possibility of searching information. Along with the Internet came also communication media like chat and e-mail. This type of communication was a new function for the libraries and the reactions among the librarians were mixed. It has been a source of big frustration and attempts to block it has not succeeded.

Staten och civilsamhället i Uruguay

Lack of political interest and will to deal with human rights violations carried out under the civil- military dictatorship, has characterized the transition and post-transition in Uruguay. The systematic use of torture, arbitrary imprisonments and forced disappearances in the relatively small country created a culture of fear that has been present through out the post-transition phase. Human rights groups have been central actors in the fight for truth and justice and against impunity. This study analyzes how these groups multiple democracy-building functions have contributed to democratic development. It also analyses how the democracy-building functions have been constrained by the political context.

Sammankoppling av fjärrvärmenäten i Nyköping och Oxelösund : miljö- och systemkonsekvenser

District heating covers most of the residential areas and industries in the twoneighbouring Swedish municipalities Nyköping and Oxelösund. In Nyköping,Vattenfall AB Värme produces heat in a bio-fuelled CHP plant. In Oxelösund,waste heat and use of waste gases from the steel production at SSABOxelösund is the basis in the district heating system.This report examines the environmental consequences of a connection betweenthe two district heating systems. A broad system approach is used and the focusis on environmental effects in the system.A system analysis has been performed on the result of simulations of differentheat and electricity production alternatives. The alternatives simulated wereone where Vattenfall Nyköping covers the base load in the joint district heatingsystem and two where the power plant at SSAB Oxelösund supplies the heatbase load.The conclusion in this report is that the consequences of connecting the twodistrict heating systems can be both positive and negative, depending onsystem boundaries and on the environmental focus.

Jämförelseförsök mellan ogräsharvning och radhackning :

The organic farmland is increasing all the time and the goal is that 15 % of the Swedish farmland will be in organic production in year 2010. The organic production needs new and more effective ways to control weeds, and there is the row harrowing coming as a good complement to the conventional weed harrowing. In this experiment is weed harrowing whit different row spaces and row harrowing with a spacing of 25 cm compared. Then are the weed picked and the weight taken of them. The yield is compared in the 7 different ways of treatment. The results is not showing any significant differences in yield even when the row spacing is 25 cm instead of 12,5 cm. Even the spring wheat that is a sensitive crop and has bad tillering is doing well in this experiment. Now with modern technology where the row harrow is controlled by a camera that making the row harrow to follow the rows is it the soil coverage of the crop that is the limit for the speed. With wide machinery is the very good coverage even with a row harrow..

Earnings management i amerikanska företag tiden innan konkurs

The purpose of this study was to examine earnings quality and earnings management in U.S. ex-post failed firms. A quantitative study was made, using the Modified Jones Model, to identify abnormal accruals up to six years before bankruptcy. 9 003 continuing firms and 187 bankrupt firms, active sometime between 1990 and 2010, were examined. The study concludes that U.S.

Factors for success in Swedish biogas : a study based on the Swedish agricultural sector

The energy sector of modern time is currently faced with several challenges. These are both production oriented and environmental oriented in nature. The energy of the future is intended to support an increasing demand while at the same time reduce its environmental affection. This stresses a development towards production methods of renewable energy. Among the existing methods, biogas is presented as an attractive alternative.

Produktionsanalys på Efterbehandling

Arvika Smide is a supplier to the automotive industry with a focus on advanced drop forgings including powertrain and bearings. The great experience and high quality is Arvika Smide?s speciality. Today's competition in the industries puts high demands on the efficiency where each company has a quest for perfection.Arvika Smide has been through the thesis of Karlstad University, called for a situation analysis of aftertreatment whose effectiveness has not been fully desirable. The department includes the production steps blasting, quality control and packaging.The thesis contains the results from the situation analysis and comparisons of the calculations for selected reference period Q4 2009th.

Nybyggnad till fårproduktion :

In Sweden we need more lambs during March to June. I decided to calculate on a spring lamb production, because to many of the Swedish lambs go to slaughter in the autumn. I counted on 1000 ewes which have 2000 lambs each year, 200 of these lambs stays on the farm and replace old ewes. The buildings are 3600 square meters. I have counted on two different sorts of buildings, the first one is a shed, the second one is three polytunnel sheephouses.

Identifiering av slöserier på Lundbergs Plåt AB

Lundbergs Plåt AB is a small company situated in Jönköping. Their main task is to process different kinds of steel such as stainless steel. Lately, they have shown an interest in Lean production.On the basis of the situation mentioned above, we developed the purpose to find and decrease the non value-added wastes in the production at Lundbergs Plåt AB. Out of this, we also developed and answered two questions: Which wastes can be found with help from a value stream mapping (VSM)? In what way can these wastes be reduced and how can these reductions contribute to an improved production? VSM is the method used to find the non value-added wastes.

Produktionsanalys av: Backa Teaters uppsättning av: UTOPIA 2012. När var du i paradiset senast?

This essay analyzes the production process in connection with the original play Utopia 2012, which premiered at Backa Theatre, Gothenburg, Sweden on 27 October 2012.The aim of the essay is to seek a deeper understanding of this particular production process. No universal process plan was employed when creating Utopia 2012. Therefore, taking into account artistic, technical and administrative aspects of the work, a chronological process map has also been constructed in connection with this essay, in order to clarify each step of the theatrical working process.The theoretical approach is hermeneutic, and the material is based on interviews with key individuals with different professions and functions within the working process in order to gain multifaceted perspectives and results. The interviews took place at Backa Theatre with the exception of those held by telephone with the project?s two producers, both of whom by that time no longer worked at Backa Theatre.The findings of the essay mostly indicate that, with the significant exception of director Mattias Andersson?s artistic vision, no fixed process map nor explicitly articulated common goals were employed in this particular theatre production.

<- Föregående sida 16 Nästa sida ->