The agricultural sector is currently highly dependent on fossil fuels, with diesel beingmost prominent. There are however both historical and modern alternatives thathave not been subject to enough evaluation to disregard them as suitable alternative.This report aims to theoretically investigate the feasibility of converting aconventional diesel driven tractor to run on electricity, delivered via a cableconnected to either the main power grid or on-site electric production, such asphotovoltaic. Delivering electricity to the machine via a cable is a method withhistorical roots in the early 20th century and in the present day mining industry.The economic and technological potential of the technique are evaluated, along withthe examination of several different motor powers, voltages, losses and constructionideas. The report finds the technique to be both possible as well as long termeconomically and environmentally beneficial. To realise this method however, somedeviations from the present methods of agricultural farming must be made,considering the more advanced driving patterns, the limited mobility and therequirement for extra driver awareness.

This final project discusses renewal and upgrading of the area of Prim. It is discussed how this industrial area can be an attractive neighborhood with a varied range of services and commercial trade. Prim is located 2km north-east of the center of Barcelona. The area boarders to a deep railway valley that historically has separated Prim from its neighboring districts. At present there is almost no housing, services or commercial trade within the area and the industry is discontinued or the existing industrial buildings are derelict. There is also a lack of green recreational areas.

Transdermal drug delivery, besides painfulinjections with syringes, has long been associatedwith small size particle pharmaceuticals, which candiffuse through the skin. This method of drugadministration has only been applicable on a smallnumber of drugs, where active molecules are smalland delivery time should or can be long.Other drug delivery options are oral administrationand injection with hypodermic needles (ordinaryhospital syringes). In oral administration thestomach and liver tend to dissolve the drug and theeffect becomes more difficult to anticipate, anddrug delivery rates difficult to control. Hypodermicneedles are used as a mean of drug injectiondirectly into the bloodstream. This method ispainful and risks infection due to tissue damageand skin penetration.One way to get a painless non-damaging techniquewith high delivery rate that still can delivery largemolecules is to manufacture an array of microscopichollow needles and equip them with a pumping unitthat delivers the correct amount of drugs.This thesis shows the technique and possibility ofmanufacture micromachined needles using low costtechniques of Ion Track Technology (radiation ofheavy ions creates porous materials), electrolessdeposition (non-current activated wet chemistrymethod of depositing metal) and electroplating.

In light of the massive property bubbles that have been bursting in the USA, Spain and Ireland during the last decade, the aim of this thesis is to clarify whether ? or to what degree - the municipality of Stockholm might experience a property bubble in the near future. The municipality of Stockholm is undergoing a housing shortage and house prices have risen during the last few years. Neoliberalism and property bubbles are used as a theoretical framework in this paper. The methodology consist of semi structured interviews, analysis of documents and statistical data from Eurostat, Valueguard and the Swedish administrative authority; Statistiska centralbyrån (SCB).

The study aims to investigate the feasibility of small-scale electricity production with solar electricity systems, also known as PV (photovoltaic) systems, in Australia. Due to the global warming, sustainable energy has in recent years become an increasingly important issue, both internationally and in Australia. With one of the largest dependencies on fossil energy sources in the world, the country's abundant solar radiation is a possible solution to this issue.Both the technical and the economic feasibility of small-scale PV systems were investigated. On the technological side, the electricity generation, distribution and consumption systems were studied. On the economical side, the parameters that drive the profitability of a PV investment were investigated.

The aim of this thesis is to examine the existence and prevalence of earnings management in Swedish companies. Theoretical frameworks often suggest that there are strong incentives to practice earnings management. The research area of earnings management has, to date, mainly focused on detecting earnings management. However, to our knowledge, no such studies have been conducted on Swedish companies. This thesis provides evidence of the existence and prevalence of earnings management in Swedish companies.

This report is a literature review that aims to describe marketing contexts for mango production in Kenya. The institutional conditions in the country are not well developed for marketing purposes, which causes many difficulties and problems for the society. In Kenya most mango producers are poor small-scale farmers with limited resources. Mango is a perishable commodity and to keep its value and quality it is essential to have the opportunity to sell the mangos in the right time. Inefficient and undeveloped infrastructure and marketing systems hinders the mangos to reach the market in time though, which causes large losses of produce.The Kenyan mango production has increased during the last decade but due to market losses for the producer, the small-scale farmers? profits have not improved.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

During spring 2009 a three meter tall and laughing robot was developed in collaboration between Royal Institute of Technology and Royal University College of Fine Arts. The robots function and esthetics is based on an existing toy robot called Elmo. Elmo is 30 cm tall but now the goal was to make it 1000 times bigger in order to present it on the spring exhibition of Royal University College of Fine Arts. Due to only four months of developing and building time a demand of fast determination and good planning was required. In order to make a good structure for the project it is divided into five phases: Analysis of Elmo, planning, concept development, detail construction and finally product development and testing.In the first phase valuable knowledge is obtained according to the movements and geometry of Elmo.

A growing issue in the construction industry is how production can become moreefficient by using logistical solutions. Companies can minimize the cost of a project byreducing the time to perform the work.The purpose of this report was to examine the logistics related to pipe trenches forSIAAB. The report's focus has been on solving problems and planning that wouldfacilitate the work of the project Vaksala-Lunda Etapp 3.The case study consists of interviews with SIAAB's employees and an observationwhere the progress of a traditional pipe trench has been documented using checklists.Questions to the report?s case study come from the theoretical part, which is basedon literature on construction management and logistics in general. The observationlasted five weeks and the biggest time-consuming events that affected the pipe trenchduring this time, has received most attention.

This thesis aims to spread some light over the phenomena of gender construction in the upper secondary school. The background of this thesis is the gender gap in education. Girls are more successful in school and receive better grades than boys. The explanation that is given for this is that pupils are limited by far to rigid gender roles (DEJA 2010). The question is how these gender roles ? and specifically masculinity ? are constructed.

The objective of this paper is to examine narrative techniques used by the Swedish author Stig Claesson, especially his transformations of texts out of the own authorship into new stories. In order to achieve my objective, I will specifically study two novels; Rosine (1991) and Efter oss syndafloden (2002) and the method practiced will be intentional reading, as described by H. Porter Abbott. For the analysis I will, with the complementary support of Abbott and Beata Agrell, turn to Gerard Genette and his theories concerning transformation and transtextuality, in particular its sub idiom hypertextuality. As a result of my analysis, various subgroups of transformation used by Claesson are identified, but also proven is how Claesson, largely by utilizing two of them; transvocalisation and transvaluation, provides the reader with the implied author of his own choice.

This essay is dealing with the difficulties of cataloging and classifying anonymi and other kinds of literature without the components which have set the norm for bibliographic cataloging, i.e. a defined author, a standardized title etc. A typical example of this kind of literature is folklore and folktales, which are dealt with thoroughly here. The character of and the society's historical view upon the folk literature, as literature considered, are being described, as is the evolution of rules for cataloging in general. The folk literature is mostly systematized after a different pattern from other literature, since bibliographical facts are often missing.

This is a thesis presents a differential gear which is found in a tracked vehicle called BvS10. The tracked vehicle is manufactured by BAE Systems Hägglunds AB in Örnsköldsvik, Sweden. The differential gear has a bolted house. The differential meets the requirement specifications, but the problem is that the bolts are sheared off because of the extreme torque that the differential is exposed to resist.Previous report on the differential show pictures of bolts which have been sheared off at the threads. This report is also includes three lists that explain seven different proposals which some are approved and some are not, and the report also presents the force, tensile, and shear stress.In a bolted connection there is both axial tension stress and radial shear stress, which can lead to wear out and broken bolts.

Ett samrådsförslag till fördjupning av Borgholm och Mörbylånga kommuners översiktsplaner för orterna Rälla och Stora Rör..