After emergencies involving chemical spills it is of great importance that correct measures are taken with short notice, both for the security of people and in order to minimize future environmental consequences. The RIB-unit at the Swedish Rescue Services Agency initiated this study, the aim of which is to propose changes to the existing chemical transport calculation tool: Chemical Spill 3.4, included in RIB - Integrated Decision Support for Civil Protection, so that it can be used for decision support as well as in preventive work. A rough estimation of chemical transport in the subsurface is considered being of great importance when making decisions during emergency response operations.The proposition presented in this report is a non site specific chemical transport model which is designed to give a rough estimation of NAPL flow in homogenous isotropic soil shortly after an instantaneous release. The model can be used at two levels; both in situations without access to information on subsurface properties, and with more accuracy in situations with knowledge of the included parameters. For that reason the user can choose among predefined alternatives or assign the parameters a numeric value to increase the quality of the model output.

The use of renewable resources is rapidly increasing in Sweden, especially the use of fuel pellets. Through pelletizing the energy content per volume unit is greatly increased and the pellets are more homogeneous with regard to moisture content, particle size and density compared to unrefined fuels like forest residues and chips. For further development of the Swedish pellet industry, the use of different assortments from lodgepole pine (Pinus contorta Dougl. var. latifolia) is of particular interest, mainly because of its high volume production.

During the past years fire has been identified as an important factor for nature conservation in the forest landscape. To accurately quantify the size of a burnt area is obviously important, but also to quantify the degree of fire damage to the tree canopy. Such data are important for assessing the conservation value, and to support planning and management of the burned area in the future. I have examined how to estimate the status of tree crowns after fire from interpretation of aerial photographs. This is possible because fire changes the structure of tree crowns and this influences the colours in aerial photographs by spectral reflection. Included in the study are four areas, three of which burned in 2005 and one in 2006.

En viktig del i sjuksköterskans arbete är patient bemötandet. Patienten befinner sig i ett utsatt läge som i vissa fall är helt främmande för patienten. Ett förtroende till att omvårdnaden är säker och trygg måste kunna byggas upp. Patientens medverkan ger oftast en positiv utveckling av tillfrisknad och känns här viktig för patientens värdighet, integritet och självbestämmande.En av sjuksköterskans många uppgifter är att registrera en patients hjärtfrekvens via ett elektrokardiogram (EKG) på ordination i diagnostiskt syfte. En oro hos patienten, illabefinnande eller en nedsatt förmåga att medverka i EKG registrering kan påverka kvaliteten på ett EKG och kräver ett professionellt bemötande av sjuksköterskan.

This report is an assessment of the feasibility of using aerial photographs to estimate number of stems per hectare in young forest stands, used together with upper height to determine the need for pre-commercial thinning or ordinary thinning cutting. Aerial photo-interpretation was conducted in 2007 on assignment of Stora Enso Skog AB. A mean height function based on stand age produced with data from Bergvik Skog AB?s 2006 forest inventory assessment was used as a proxy for upper height and used together with photo-interpreted number of stems per hectare to determine the need for thinning cutting according to Bergvik Skog AB?s definitions. The test area is located north of Falun on Bergvik Skog AB?s land.Flight altitude was approximately 900 m above ground and the aerial photos were taken by L&L Flygbildteknik AB.

The last decades have shown increased nitrogen leeching from soil to water recipients. This is inSweden mainly due to over-manuring of agriculture land, effectivization of drainage systems and thedeclining extent of wetlands. The accumulated amount of nitrogen in water doesn?t only make itunsuitable for use by humans and cattle, but also decreases the biological diversity as well as negativelyaffect tourism and fish industry. In the most severe cases shallow maritime grounds can be completelydepleted of oxygen due to decomposition of the increased amount algae and plankton growth.This study have the aim to describe and quantify the nitrogen leeching from the Genevad drainagebasin, located in southern Halland, Sweden.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

South Africa has been among the top ten wine producing countries for at least 20 years. Even though the land under grapevines is decreasing globally it is still increasing in Africa. The awareness of environment has strengthen the last years and South African producers experience a high demand of environmentally friendly produced wine, especially from the European market. This demand was the driving force behind the development of the world unique sustainability certification, Integrated Production of Wine (IPW), which is inscribed in the South African legislation. What makes this certification unique is that consumers can trace their product all the way back to the farming practices owing to the identity number specified on the IPW Integrity & Sustainability seal on certified products.

The idea with constructions made out of prefabricated elements is that it should be quick and easy to build as the demands for lower production costs, increased profitability and shorter production times are constantly increasing. High accuracy in measurements and well-balanced tolerances is required to achieve this. The fact that the concrete-elements doesn?t fit and that damage occurs during assembly is a highly topical issue even though we now have methods and systems that make this high-intensity construction possible. Through this report we want to highlight the problems that cause the dimensional and tolerance problems and give suggestions on how to come to terms with these.

This MSc thesis is divided into two parts. The first part deals with the need for information from forest campartments selected for clear cutting, in connection with planning in an integrated forest- and sawmill enterprise. A review of literature is followed by a case stud y, where present conditions in a Swedish forest company are compared with current research in the area. The seeond part consists of a simulation stud y, which aims at camparing the accuracy of inventory estimates using different methods. The estimates are delivery forecasts, covering one month consumptian of timber in a large sawmill.