A well known optimization-problem of multiprocessor system is scheduling of tasks. In this paper I use a variant of previous known algoritm, (Fast Critical Path) for scheduling real-time tasks on a multiprocessor system. This is made in a simulation study in MATLAB. The system architecture is assumed to be a MIMD- machine, (Multiple Instruction stream Multiple Data stream) with bus-typologi and message-architecture. Scheduling was made on this system where the number of processors varying from five to ten.

This degree project was conducted in collaboration with Gremo AB located in Ätran.The aim of the project was to develop a solution to secure quality and to help assemblingthe locknut holding the vertical hinge on the harvesters and foresters from Gremo.At this time the nut is assembled manually by the aid of an overhead crane. The nut istightened differently from time to time, and there was no specified torque to which it istightened. Another present problem was the locking washer which sometimes getsdamaged during assembly, when this happens the procedure has to be started over fromthe beginning. The current assembly procedure is very time consuming and lengthy forthe employees.Our task was to design a machine that could tighten the nut to a specified torque with amargin of error of ± 3%. The assembly procedure will be held simple and the timerequired at a minimum.The project started by developing several principle solutions, the one solution that bestmatched our specifications were developed to a primary solution.Today we have started manufacturing and assembling our prototype.

To create multifunctional buffer strips along a watercourse in an economically sustainable way requires consideration of many different factors. In this plan we have selected pollutant reduction as the main purpose of the buffer strip. We have also strived to achieve minimal income loss due to reduced production, increased biological diversity, good game preservation that leads to higher income from hunting, aesthetical satisfaction and possibility to profit from available subsidies. This is done mainly to make landowners/farmers more interested in creating buffer strips along water courses. As sand is the dominant type of soil in the area, the water course is less affected by surface runoff compared to if the soil would be clay or some other finer texture. Game preservation and subsidies have therefore been the main factors when establishing the width of the strip, because these require wider buffer strips in some cases.

This examination work is about an marketing investigation of John Deere Moco 730/735 during the season year 2003. Moco 730 has an workingwidth on 3 m, and 735 has one with 3,5 m. The research results of 16 moco 730/735 are from intervju- and questionnaire made of the owners. The results also comes from intervju anwser from dealers which sold this mocos. The examination work shows comments and opinions from the customer after one seasons use. In the end of my examination work are all comments and opinions put together in a marketing analysis called swot-analys in Swedish. The analysis declare that the moco 730/735 is functional and have god quality. The future seems god for this kind of moco. The strength for this moco are god quality and the dealers god service support. The most important weakness about this moco are that the machine came out late on the market, compared to other mocos on the market. I think it´s important the have in mind that the customers are very John Deere faithful and this JD 730/735 is used for only one season..

This study was made on former agricultural areas that had been planted with spruce or pine, in the county of Västerbotten. The goal of the project was to investigate suspected deficiency of boron in these areas. Several objects have been reported for possible deficiency and some of these have the characteristic symptoms of boron-deficiency. The hypotheses are that 1) Boron deficiency is present at several of the investigated objects. 2) Planting of forest on cultivated postglacial sediments leads to a successive podzolisation with a decreasing content of organic matter in the mineral soil, due to decomposition, and a decreasing pH in the soil, even on locations that have been added lime. To be able to confirm or reject the hypotheses a number of tests were performed.

Dione kullager AB is a company in Uppsala, which sell industrialmachinecomponents, transmissionsolutions and provides repair serviceof hydraulic components.When a hydraulic cylinder is about tobe repaired it needs to bedisassembled. Because hydrauliccylinders usually work in dirtyenvironments and are heavilyworn some types of cylinders arealmost impossible to disassemble.Today the disassemble is made by hand,which means extra work for themechanics. In order to facilitate thedismantling of this type of cylindersa machine is to be developed for thispurpose and this is where this thesisbegins.The thesis has been organized in threephases: Literature study in whichfacts and theories are acquired.Concept generation in which differentconcepts, calculations, and solutionswere identified and selected. Thedesign phase where all the differentconcepts of components were assembledand simulated in SolidWorks. Similarstructures have also been studied inorder to identify necessary functions.The thesis resulted in a structurewhich is believed to meet therequirements.

To plan and build a garden in Dubai has other conditions and challenges than what you experience in Sweden. The heat, wind and lack of water makes the need for durable plants, a good design and landscaping important if you want to have the opportunity to use your garden during most of the year. The soil is poor of nutrients, alkaline and sometimes saline, witch makes supplying the soil with organic material and various fertilizers necessary if you want to be able to plant a bigger range of plant material in your garden. Another important part is to provide your garden with a good irrigation system that should be put into the ground before planting so that the plants are given a more even irrigation. It?s relatively green scenery you meet and to me it?s in a way surprising since the country with its climate is rather harsh for the purpose of supporting plant life.

ABSTRACT Tobacco Rattle Virus (TRV) is a soilborne plant virus. It is an important pathogen in potatoes where it causes spraing disease. This disease can lead to significant economical loss for the farmer, so it is imperative to get the proper diagnose before planting. TRV is spread naturally by free-living nematodes (Trichodorus and Paratrichodorus). Transference of TRV to a plant occurs when the virus-carrying nematodes feed on plant roots. The relationship between virus, nematodes and plants is complicated, and has to these days not been fully characterized. The diagnostic methods available today do not work sufficiently.

En av Glimek AB:s mest förekommande maskiner är SD-180 som används för degavvägning. Den finns i flera olika varianter. Den enklaste har enbart start- och stoppknapp och en potentiometer för att ställa hastigheten och en mer avancerad variant har en operatörspanel där olika möjligheter till inställningar finns.Konstruktionen på denna maskin hade inte uppdaterats på många år och behövde en uppdatering av användargränssnitt, programvara och elkonstruktion. Arbetet har framförallt koncentrerat sig på användargränssnittet till panelen.En del av arbetet var att undersöka om det var möjligt att utesluta PLC ur konstruktionen och använda en mer avancerad programmerbar frekvensomformare. Eftersom det blev problem med lanseringen av programvara till frekvensomformaren och enbart en mindre bra fungerande demoversion fanns tillgänglig så var detta tyvärr inte möjligt.I arbetet har olika varianter på operatörspaneler utretts.

Vi möts av mängder med bilder av teknik och vetenskap i populärkulturens verk. Dessa bilder kan ses som representationer av vår verklighet och bidrar också till att skapa våra uppfattningar om världen.Denna uppsats fokuserar på att studera just de populärvetenskapliga bilderna av teknik och vetenskap som finns representerade samt hur dessa bilder är en del av sin kontext. Genom att närmare studera filmerna Demolition Man och Sunshine, utifrån frågor om tekniken skildras som ond, god eller neutral, hur vetenskapsmannen gestaltas samt hur förhållandet mellan människa och maskin ser ut, nystar denna uppsats fram de bilder av teknik och vetenskap som återfinns i dessa två verk..

The popularity of vegetated, or green roofs, has grown over the past years due to their potential function of maintaining urban environment quality. The aim of this study was to investigate if substrates with different organic material, peat and charcoal, with two contents (3 or 6 weight%) influenced the growth of the cuttings during the first critical period of the establishment. Biochar is used as amendment to agricultural soils and has, theoretically, many of the properties suitable as organic content in green roof-substrates. Peat is one of the materials that is commercially used in green roof industry. The substrate has been treated with different amounts of water.

In Sweden, grass is the single largest crop grown. Nearly 1 000 000 Ha grows on the fields, this is primarily used as feed for livestock. To get a good seed, you need to handle the crop carefully from planting to delivery. The part that I have been interested in, is how to dry the harvested seed with out destroying the growth in the small seed. This is very easily done if you aren?t careful during the drying period.

I den här uppsatsen beskrivs en ansats till att med hjälp av statistiska metoder förutse utfallet i förmögenhetsra?ttsliga dispositiva tvistemål. Logistiska- och multilogistiska regressionsmodeller skattades på data för 13299 tvistemål från 5 tingsrätter och användes  till att förutse utfallet för 1522 tvistemål från 3 andra tingsrätter.  Modellerna presterade bättre än slumpen vilket ger stöd för slutsatsen att man kan använda statistiska metoder för att förutse utfallet i denna typ av tvistemål..

During the cultivation season there are a several cropping activities to carry out. At what time these activities are carried out is affecting the result and also on the economy of the crop production. As the production costs are high in potato production, it is important to keep an eye on the economy. Profitability is the most important factor in most crop production systems. If the costs are not covered, it is difficult to justify the production.

The countries in the European Union have agreed to increase their percentage renewable energy sources to 20 %. To reach this goal an increase of biomass production needs to be made. One way of achieving this is by using nonnative species. Poplar in Sweden produces biomass faster than the domestic trees. In the southern parts of Sweden plantations has been made with good results. In the northern parts survival is a problem that needs to be solved before plantations can be made for commercial use.