The aim of this essay was to study the nitrogen flow in two willowplantations, at different locations in the south of Sweden, that wereirrigated with sewage. The study was also performed to compare thedifferences in nitrogen flows between two years, 1998 and 1999. The studywas made in three parts. First, the denitrification activity was measuredusing the acetylen inhibition method. Second the nitrogen flow, as well asthe water- and heat flows, were modeled through the SOIL-SOILN-modelThird; the nitrogen flow was calculated to compare with the results fromthe model.The results from the measurements were then compared with the resultsfrom the SOILN-simulations to detect differences in the denitrificationrate.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

This report deals with an exam report written by Olle Hjalmarsson and Thomas Likar, students at Högskolan i Halmstad. The project was carried out for Haldex Traction AB in Landskrona whose business consist of manufacturing automatic all wheel drive systems (AWD-system). These systems consist of a plate clutch which activates all four wheels of a 4-wheel driven vehicle. An important component in these clutches is the accumulator which basically consists of a piston under the load of a spring which creates an oil pressure with the help of an electric motor used for actuating the clutch.At Haldex difficulties has been experienced regarding the assembly of the accumulator parts due to the small tolerances between the piston and the hole of the accumulator in the cast aluminium housing. Attempts have been made to assemble the parts in existing robot cells.

Food waste from grocery stores - An analysis of municipal management inSweden and a detailed study of the situation in Umeå municipalityThe objective of this thesis was to analyze the municipal management of food waste fromgrocery stores in Sweden in general and in Umeå municipality in particular. Furthermore theobjective was to account for the different waste treatment methods that can be used and toevaluate them from an environmental perspective. In order to analyze the municipalmanagement a survey was sent to all of the municipalities/municipal waste companies inSweden. A general comparison of treatment methods was carried out on the basis of ascientific review and a system analysis was performed in order to compare three differenttreatment alternatives for the food waste generated in grocery stores in Umeå. The surveyshowed that the legal definition of food waste from grocery stores is unclear and variesbetween municipalities.

AbstractThis degree thesis was made in cooperation with Chematur Engineering in Karlskoga.Many of the environmental issues of today are a result of the motor traffic. Consumption of fossil fuels harms our environmental through formation of carbon dioxide and other greenhouse gases. To get under control with our environmental issues it?s important to find substitutes for oil that are both cheap and environmentally friendly. Ethanol has a long history as a motor fuel and is both enviromentally friendly has a high efficiency.According to the EU commissions directives for motor fuels, 5, 75 % of all the fuels in Sweden should be renewable in 2010.

For a long time Lean has been a well-known concept among manufacturers. Theinterest of understanding Lean and the ability to implement it is common amongcompanies. The concept of Lean, used in the right way, can help companies to reducetheir lead times, their complexity and increase the efficiency of the working processes(Hyer och Wemmerlöv, 2002). Unfortunately the work towards increased efficiencyhas primarily been focused on manufacturing and plant work, resulting in that Leanhas been adjusted to these areas. The conclusion of this is that companies don´tprioritize to improve processes such as administrative ones.

Unmanned aerial vehicles (UAV?s) are nowadays greatly appreciated. The advantage over manned airplanes are great since UAV?s can be much smaller and therefore lighter. The goal of this project is to evaluate the performance of an environmentally friendly UAV using only lithium-ion batteries.

As a member of the EU, Sweden has, in some cases, transferred the controlling rights to the Union. This means that the rules defined by the EU must be followed in all member countries, including Sweden. The European Agricultural policy constitutes the largest part of the EU's annual budget and is in contrast to many other areas fully funded at EU level. The last decade, many new regulations on chemicals and pesticides have been introduced which brought great changes and a lot of work throughout the Union, including Sweden. Sweden has always had a strict policy on chemicals and has been at the forefront when it comes to sustainable agriculture and environmental management.

SammanfattningTvå personalgrupper i två olika organisationer intervjuades. En av utgångspunkterna var att försöka ta reda på vad som skapar förtroende hos en anställd för sin chef. Tanken var att se vilka likheter och skillnader som kunde utrönas. Resultatet visade dock att likheterna var större än skillnaderna.Bakgrund:Inspirationen till detta arbete är Margaretha Oudhuis avhandling om ?Volvo- The bus plant case? Efter att ha tagit del av hennes arbete så växte inspirationen fram till att göra ett liknande arbete fast med tillit som utgångspunkt.Teoretisk utgångspunkt för detta arbete är Max Webers teorier om ledarskap samt Anthony Giddens teori om tillit.

Beans are a global source of plant-based protein, and in some countries, they constitute a primary source of protein intake. With ongoing climate change, including rising temperatures, it is necessary to adapt beans to ensure a reliable food supply. An important mechanism that many plants have, to cope with high temperatures, is cooling through transpiration. During transpiration, stomata open and release water vapor. Water molecules use heat energy from the leaf to convert into gas, thereby cooling the leaf.

Every year begomovirus infections cause severe constraints to the tomato production in Nicaragua. Extensive yield losses are followed by large economical losses, both for the country and the single farmer. During recent years the use of begomovirus resistant or tolerant tomato cultivars has increased in Nicaragua as an effort to improve yields. Still, begomovirus infection is a large threat to the tomato production. Therefore, ongoing work in Nicaragua is focusing on finding new, better, begomovirus tolerant or resistant tomato cultivars.

Biogas mainly consists of methane and carbon dioxide, where methane is theenergy-rich gas, and is naturally created when organic matter breaks down in absenceof oxygen, also known as anaerobic digestion. A biogas plant re-creates the anaerobicconditions inside a digester where the organic substrate is fed into and digests toproduce biogas. The gas is then used to produce energy by combustion and can beseen as a completely renewable fuel.Today, energy from biogas is used primarily by major stakeholders such asmunicipalities and thus the plants become very large with high investment- andconstruction costs. There are currently few small plants in Sweden, even though thepotential for agriculture and medium-sized to smaller farms to become self-sufficientin terms of electricity and heat is great. Farms have a natural stock of digestibleorganic material in form of manure or crops for example, which are constantlyavailable.

In Uppsala CHP Plant, there are six pressure reducing valves to reduce the pressure from 15 to 3 bars, before six absorption heat pumps. During the process the energy is conserved but losses occur in form of exergy. The aim of this thesis is to reduce the losses of exergy. This can be done by letting turbines replace the pressure reducing valves.In this thesis an investigation has been done of the conditions today, the conditions after the change from pressure reducing valves to turbines and a comparison of three different types of turbine solutions. The three examined solutions are one turbine, several helical screw expanders and several small turbines in parallel with asynchronous generators.The six absorption heat pumps have been divided into two groups; one group of four and one group of two absorption heat pumps.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

Horse owner?s knowledge about horse feeding and nutrition is directly linked to the horse?s health and welfare. According to several studies, both Swedish and foreign, horse owners generally have inadequate knowledge about horse feeding. The housing systems and feeding routines of today differs in many ways from what horses have adapted to through evolution. Wild horses live in harem herds and roam on large open fields, spending about 60 % of the day grazing, mainly grass and herbs.