Stationsetablering innebär bestämning av ett mätinstruments fysiska läge och orienterad riktning. I dagens bygg- och anläggningsbransch används nästan uteslutande fri station för att etablera en stationspunkt för mätningar. På en byggplats är tillgången till referensobjekt ofta begränsad. Instrumentets placering blir därför en kompromiss mellan tillgång till referensobjekt och tillgång till den plats där inmätning respektive utsättning skall ske. Denna kompromiss ger upphov till skiftande geometriska konfigurationer hos referensobjekten, vilka påverkar mätresultatet.Studiens syfte är att undersöka om simuleringar av fria stationsuppställningar i Svensk Byggnadsgeodesis (SBG:s) programvara Geo verifieras av fältmätningar och efterföljande beräkningar av osäkerhetsparametrar orsakade av konfiguration och mätta längder och riktningar.

The Swedish parliament has decided that Sweden should increase its usage of renewable fuel sources to a level of 50% of the total energy consumption in Sweden by the year 2020. One way to reach that goal may be to increase the usage of stumps as a bio-fuel. In Sweden stump harvesting is possible on about 5-10% of the total harvested area and thus contribute with 1,3 - 2,6 TWh per year. An increase stump harvest doesn't come without its drawbacks for the environment. When harvesting stumps a tracked excavator is used to pry the stumps from the ground and then cut the stumps into smaller pieces.

Nuclear power production carries potential risks both for the environment and for the work force. Different safety measures are employed and they stem from local rules as well as from regulatory authorities. This work describes the development of a safety promoting tool at Forsmark Power Plant, one of Sweden?s three Nuclear power plants. We describe the development of a computer based system for Pre-Job Briefing and Post-Job Debriefing.

I detta arbete har den faktiska och simulerade energianvändningen på Spira förskola i Luleå undersökts. Den faktiska specifika normalårskorrigerade energianvändningen fastställdes till 121,4 kWh/kvm år. Vid projektering av förskolan uppskattades den specifika energianvändningen med hjälp av simuleringsprogrammet VIP-Energy till 78,5 kWh/m2 år. Därmed översteg den verkliga användningen den simulerade med 54,6 %.En parameterstudie av indata till simuleringsprogramet har också genomförts med avsikt att fastställa den totala förändringen i energianvändning då indata ändras. Följande parametrar har studerats;?Drifttid hos ventilationssystemet?Horisontvinkel?Inomhustemperatur?Klimatzonen?Kvot mellan till- och frånluft?Luftomsättning för ventilationssystemet?Solreflektion från omgivande mark?Temperaturverkningsgrad?Vindhastighet?Vridning av byggnadenNyckeltal som kan användas för att snabbt uppskatta påverkan på den totala energianvändningen har också sammanställts för majoriteten av de studerade parametrarna.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

Many of Europe?s day-living butterflies have shown decreasing populations during the last decades and many species are threatened. Many butterflies are dependent on managed semi-natural grasslands because of their richness in nectar sources and host plants for the butterfly larva. Swedish pastures are mostly managed through grazing. The number of cattle in Sweden have been decreasing while the number of sheep in the country increased by 30%.

This case study is made on assignment of Södra, region Öst, as a part of a campaign promoting more active management of the oak forests in the region. Hardwood trees of good quality, especially oak, has a high value due to that the sawn material is highly estimated by the market. It is important that the Swedish oak forests are managed in a proper way in order to meet the future demand. Södra has therefore decided to increase the focus on oak in the Kalmar region and they would like to find out if continues cover forestry (CCF) under certain conditions can be an appropriate management model. The motive is to make use of the existing oak forests more efficient, not just considering well managed forests but also the more neglected oak forests, on poorer soils. Thus, the objective for this study is to examine if CCF is appropriate method in the three stand types; broadleaved mixtures oak forest, oak islet, and oak/spruce forest. Existing management models were surveyed in the literature.

To manage the industry?s need of wood assortments in a optimal and cost effective way the forest companies need to have knowledge of the actual standing volume and the yield of the planned clear cuts. The mean volume of the trunk is also important since it is important for the contractors prices. Today the total volume are estimated either with Näslund (1940) or Brandels (1990) functions of volumes, and the yield is estimated with Rune Ollas (1980) function for trunks and stands. The purpose of this study has been to answer the following questions: How good is the yield forecast with data collected with currently used methods? How well can the yield forecasts became with data collected according to the instructions? How well can the yield forecast be with data collected according to the instruction and calculated with the program Aptan for theoretical bucking? The study has been initiated and financed by SCA Skog AB.The material consisted of a number of randomly selected objects ready for clear cut.

The wild boar (Sus scrofa) is since its recent establishment and increasing density a controversial species in Sweden. But the attitudes towards the wild boar are poorly documented so far. To improve this knowledge, a questionnaire was sent out to chosen people (n=400) connected to the management and/or land use activities. The study got 162 replies (reply frequency 40,5%) and the results show varying attitude trends among organizations and individuals, with some aspects coherent within groups and some not. Farmers and their organization showed the most negative attitudes towards wild boars, which was expected due to the practical and economic problems they suffer from this species. People involved with forestry were more positive to wild boars, probably because the species does not affect forest growth etc severely, and may even promote plant establishment by the rooting.

To create multifunctional buffer strips along a watercourse in an economically sustainable way requires consideration of many different factors. In this plan we have selected pollutant reduction as the main purpose of the buffer strip. We have also strived to achieve minimal income loss due to reduced production, increased biological diversity, good game preservation that leads to higher income from hunting, aesthetical satisfaction and possibility to profit from available subsidies. This is done mainly to make landowners/farmers more interested in creating buffer strips along water courses.As sand is the dominant type of soil in the area, the water course is less affected by surface runoff compared to if the soil would be clay or some other finer texture. Game preservation and subsidies have therefore been the main factors when establishing the width of the strip, because these require wider buffer strips in some cases.

The purpose of this bachelor degree thesis is to analyze technical issues associated with an implementation of a low sloping trash rack with narrow spacing. A hydropower plant in Umea?lven was used as a case study. The basis for the study was a model where trash racks were dimensioned for inclinations between 25 and 45 degrees. Corresponding head loss, durability and water speed through the rack were then determined for each inclination.

The purpose of this study has been to make an inventory of combustible waste in the region around Norrköping and to investigate the composition of domestic waste, industrial waste and two different types of sludge. The work was performed at the request of Norrköping Miljö & Energi, due to the planning of an incineration plant. The inventory of the waste was performed through inspection of environmental impact reports, from waste disposal plants in a number of local government areas in the region. The quantities were also compared to another inventory, carried out in a different way. The characterisation of the wastes was compared to the fuel specification determined by Norrköping Miljö & Energi.

The constant need of energy is something that affects us all no matter our current situation. Whether we are driving our car to work, taking the elevator or using the oven to cook dinner we end up relying on energy. Our whole society is continuously striving to achieve a higher grade of efficiency and the process of supplying ourselves with energy is no exception. The importance of appliances in our everyday life cannot be exaggerated and thus the importance of their high efficiency.Efficiency is already a keyword in the appliance industry with labels, stars and numbers helping us choosing the most suitable option for the task ahead. No matter how efficient appliances often use pure electricity as their energy source.

The vegetation?s impact on erosion control is widely explored, even though research? results are scattered where it suggests a both positive and negative relationship between roots and erosion tendency. Research has measured the roots? impact on erosion by many different methods, hence the aim of this study is to offer a clearance of what factors play an important role in the choice of appropriate species controlling river bank erosion. I have therefore studied 17 articles concerning vegetation and erosion control, which were found in different databases such as: Web of Knowledge, Biological Sciences, Academic Search Elite and Google Scholar.

To create multifunctional buffer strips along a watercourse in an economically sustainable way requires consideration of many different factors. In this plan we have selected pollutant reduction as the main purpose of the buffer strip. We have also strived to achieve minimal income loss due to reduced production, increased biological diversity, good game preservation that leads to higher income from hunting, aesthetical satisfaction and possibility to profit from available subsidies. This is done mainly to make landowners/farmers more interested in creating buffer strips along water courses. As sand is the dominant type of soil in the area, the water course is less affected by surface runoff compared to if the soil would be clay or some other finer texture. Game preservation and subsidies have therefore been the main factors when establishing the width of the strip, because these require wider buffer strips in some cases.