Today it is mainly small and medium sized companies that choose to outsource parts of their ITdepartment in order to increase and become great. It is becoming increasingly common forcompanies to take the help of competent suppliers so that they then can focus on their own corebusiness. These companies are taking advantage of modern methods to support systemdevelopment by outsourcing to other countries such as India. Choosing to outsource to othercountries poses new challenges for companies when they meet both cultural and organizationaldifferences. It requires a lot of time and planning and clear communication in order to developand reach the goal.

The Homogeneous Charge Compression Ignition (HCCI) engine is promising in terms of lowNOx, low particulates and high efficiency. Due to its homogeneous charge, where thecombustion starts almost simultaneously from a number of points in the combustion chamber,only lean mixtures are possible to burn because of the resulting rapid combustion, which is muchfaster than the combustion in an SI-engine or a diesel engine. When richer mixtures are used thecombustion will start earlier and also be more violent.To phase the combustion later and lower the combustion speed, external cooled EGR can beused. The EGR-system used in this thesis uses a divided exhaust channel where one channel andits corresponding valve are used only for transporting EGR back to the intake system.Consequently the EGR-valve is connected to the intake pressure. This system is called Direct-EGR (D-EGR).Engine tests verified that the CA50 indeed is phased later when cooled EGR is used.

This degree project has been carried out by Carolina Rapp and Jenny Tauson, students at Innovation and Design Engineer program at the Faculty of Technology and science at Karlstad University. The project was carried during Spring of 2009 and took 15 weeks of full time work.  Doppelmayr/Garaventa Group is an Austria/Switzerland corporate group and its associated company Doppelmayr Scandinavia lies in Sunne, Sweden. Doppelmayr/Garaventa Group is the world quality and technology leader in ropeway engineering. The degree project goal was to develop a new shaping of a surface lift. There are two kinds of surface lifts, platter and T-bars. The two kinds of surface lifts have some variation in design but only minor differences.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

During its lifetime, a road goes through a number of different stages; pre-study,inquiry of the road, work plan, documenting stage, building stage and operatingstage. The operating stage is the one that takes the longest time and costs themost. Those have a tendency of becoming unnecessarily high because the projectengineers don?t always take the management and maintenance prerequisites intoconditions.To decrease the management and maintenance costs, the Swedish RoadAdministration SouthEast has been in need of a work procedure that makes theroaddesign engineers take the management and maintenance of the road intoconsideration. This shall be achieved by a checklist where the most commondesigns that lead to increased management- and maintenance costs are compiledand listed.Through interviews with project leaders in management, the most commonproblems have been identified, analyzed and summarized under the headlineswinter-road, vegetation, road equipment and road designs.To elucidate the problem from several points of view, interviews wereimplemented with project leaders in investment and roaddesign engineers.

This study is a part of a Swedish research and development project that is about heat-treated wood and is led by the Swedish University of Agricultural Sciences and Luleå University of Technology. Products that are heat-treated already exists on the market, foremost the Finnish brand ThermoWood®, bur the project group want to find out if it would be possible to start a Swedish production with somewhat different applications than what is common today. The heat-treated wood has many attributes that have changed in the heating process. It becomes more biologically durable, it gains stability in form and dimensions and it becomes darker and looses several unwanted extractives such as resin. Disadvantages that can be mentioned are that the wood becomes fragile and the strength properties changes. My main purpose with this study is to look into customer involvement in the early phase of product development. I also want to find out if the customers I interview think that the product is worth working with, which means start a Swedish production.

Sectra Mameas is a medical technology company in an expansive phase that is planning to increase its volume capacity with 50 % in the beginning of 2009. This to be able to deliver the increased number of systems that the customers request. To be able to produce more units the takt time of the assembly line needs to be shortened. This could only be done by identifying and solving recurring problems. To be able to find the problems, create a common knowledge of which these are and eliminate them the production department of Sectra Mamea needs to visualize certainKey Performance Indicators (KPI) in the organization.

What are the basic thoughts formulated in the Heraclitean fragments? A cosmology, a philosophy of nature, the idea that all can be reduced to a single substance? There is always a risk that Heraclitus is fitted into a thought pattern he doesn?t belong to, if we ? from our present horizon ? focus on continuity in an attempt to frame his thinking as part of an overall progress, running from the so-called pre-Socratics to Aristotle, in the history of philosophy. If we picture the dawn of Western civilization as an early development of scientific thinking, built on a gradual and continuous growth of knowledge, we will easily go astray as we try to discover the Greek origins of philosophy. Assuming, for example, that the readings of Heraclitus as a natural philosopher have come to a dead end, can we approach the fragments from a different angle?The aim of this paper is not to give a systematized reading of all the remaining fragments of Heraclitus, but neither to necessarily contradict the various interpretations that emphasise how these shattered remains reflect a coherent philosophy.

Along with other European farmland birds, the skylark (Alauda arvensis) has declined rapidly since the 1970?s. Between 1975 and 2003, the Swedish population of skylarks declined with 64 %. In Britain, the decline is often explained by alterations in farming practices in general and the shift from spring-sown to winter-sown cereals in particular. The dense vegetation structure of winter cereals is limiting the number of breeding attempts possible, causing the entire population to decline.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

What are the basic thoughts formulated in the Heraclitean fragments? A cosmology, a philosophy of nature, the idea that all can be reduced to a single substance? There is always a risk that Heraclitus is fitted into a thought pattern he doesn?t belong to, if we ? from our present horizon ? focus on continuity in an attempt to frame his thinking as part of an overall progress, running from the so-called pre-Socratics to Aristotle, in the history of philosophy. If we picture the dawn of Western civilization as an early development of scientific thinking, built on a gradual and continuous growth of knowledge, we will easily go astray as we try to discover the Greek origins of philosophy. Assuming, for example, that the readings of Heraclitus as a natural philosopher have come to a dead end, can we approach the fragments from a different angle?The aim of this paper is not to give a systematized reading of all the remaining fragments of Heraclitus, but neither to necessarily contradict the various interpretations that emphasise how these shattered remains reflect a coherent philosophy.

The wind power increase of Gotland as well as other parts of Sweden during the last ten year period has meant that this renewable energy source has increased its share over other fossil sources. The year of 2011 became the first when the wind power produced more energy than an average nuclear reactor. Now that wind power is in an expansive phase, the land issue will be of great interest. Land with good wind resources will be of interest to wind energy developers. The problems that this essay is based on are; how can landowners altering the economic conditions at a wind power establishment? What opportunities and obstacles exist for landowners who choose to set up wind power on their land? The purpose of this essay is to highlight the economic conditions that exist for landowners for the establishment of wind farms, with regard to compensation for the leasing and return on invested capital.

AbstractThis is a thesis done in cooperation with the firm Somas and University of Karlstad. The project is an independent final examination part of the program in Innovation and DesignEngineering comprising 22.5 points, and performed by Mia Myrén Zreloff during spring term 2012. In parallel and collaboration, Fredrik Kjellin performs a similar job for the same company and with the same extent, but for the Program in Mechanical Engineering.The client and supervisor at the company have been Magnus Jansson and Anders Josefsson. At Karlstad University has technical supervisor been Hans Johansson, and in the design- and development process it was Monica Jakobsson. Examiner has been Fredrik Thuvander, professor in the Faculty of Technology and Science at Karlstad University.The mission has been to make a basis work for the company's own development and make a computational model to calculate, visualize and implement materials and other solutions in the manufacture of the company's ball valves.The project has undergone three major phases that included thorough study of the company, production, the problem and product.

Goods that children come in contact with on a daily basis for example toys, electronics, textiles, household items, have attracted an increased attention in recent years because of a common occurrence of residues of potentially hazardous chemical substances. Some municipalities in Stockholm have developed plans for managing chemical risks and work systematically to phase out products containing hazardous substances. This thesis aims to contribute to an improved knowledge base for any future work with non-toxic nursery schools in Haninge. The study's focus is on the challenges encountered by conditions and problems of preschool personnel to manage chemical risks in early childhood environments. Primary data was collected through a qualitative approach based on semi-structured interviews with both the preschool staff and practitioners working in the central organization of the municipality.

ur society is today in a phase of development in environmental and sustainable thinking. Alarming reports show changes in climate caused by our load and exhaust of resources. The energy usage contributes to a big part of it, by its emission of carbon dioxide. The built environment uses around 40 % of the total energy consumption in Sweden and requests to strongly reduce it are presented from both EU and national level.This thesis brings up the subject of green building with a focus on how we can create more energy efficient buildings in projects of new construction. Since the construction industry today often fails to pass on the knowledge between different projects, as a return of experiences, the construction company Skanska suggested the topic for this thesis.