Syfte: Syfte med uppsatsen är att öka vår kunskap om product displacement samt att utreda den påverkan product displacement har på mottagaren sett ur ett marknadsföringsperspektiv. Pararellt undersöks om fenomenet kan vara en fördel eller nackdel i marknadskommunikationen. Utgångspunkten i utredningen är att varumärkesinnehavare själva använder sig av product displacement.Metod: Denna studie har genomförts med en kvalitativ metod och induktiv ansats. Metodvalet har sin utgångspunkt i den bristande teorin då fenomenet product displacement är ett nytt begrepp sett ur ett marknadsföringsperspektiv. Undersökningen bygger på tjugo kvalitativa intervjuer med mottagare av product displacement samt två respondenter med yrkesanknytning inom marknadsföring.Avgränsningar: Denna uppsats behandlar endast product displacements effekter på mottagaren som i vårt fall är begränsat till studenter i ålder 20-25 år.

More often consumers demand instant dry soup that can be prepared with a water temperature below 100o C, which is currently not possible, because the dry soup becomes too thin when using water with a lower temperature. In this study, various kinds of starch studies were made to optimize the starch used in the existing product to make it more viscous at both high and low temperatures. The result was that one of the two starches present in the existing product was retained by change in quantity as it contributed to important flavor parameters. The second was removed and replaced with a starch that made the product more viscous at lower temperatures. To find out if the new product differed from the existing product a viscosity measurement and a sensory paired preference test were made.

Existing studies concerning private labels are unclear as to whether private label manufacturers carry out product development themselves. Furthermore, there is a lack of studies comparing product development processes in private label companies and national brand manufacturers. This study highlights a set of critical product development factors and assesses their prevalence in four different companies in the Swedish retail business. The study is based on a number of qualitative interviews with key personnel responsible for various table fats. Findings indicate two levels of involvement in the product development process on the private label side.

Lean Product Development is a knowledge-based business concept in order to maintain high quality, meetcustomer requirements and to make product development more efficient. An important part of the processis to add a lot of resources at an early stage and execute the development as an iterative process betweendepartments exploring many alternatives thoroughly. The work focuses on how Lean ProductDevelopment is carried out and explores how to manage interaction between different departments andexpertise with regard to cross-functional collaboration and knowledge sharing i.e. learning.The information for the studies was gathered at a major Swedish company from two projects. The projectswere carried out as cross-functional and possible key factors for cross-functional collaboration wasidentified.The results have been correlated with theories of Lean, Product development, Lean product developmentand Learning.

Product sharing systems is recently starting to become a more common phenomenon. Carpools exist in more than 40 Swedish towns and both Stockholm and Gothenburg have established bicycle sharing systems. Other products for which sharing systems have been established throughout Sweden are clothing and tools. From the point of view of the consumer, product sharing systems is a form of consumption which can be placed somewhere in between renting and privately owning a product, where the consumers usually pay a membership fee or a monthly fee to have access to the products whenever they need them. The concept is relatively new, and there are many products for which product sharing systems do not exist.

The purpose with this research is to examine how the green marketing in retail trade can be developed in order to promote the eco-labeled products closer to the consumer.The method for the survey includes interviews with managers of a few retailers and their customers in the industrial sector. The purpose with the interviews was to produce the retailer and the customer?s perspective of products with eco-label on.The research is limited to the region of Västra Götaland.The results from this research indicate that there is a lack of communication between the retailer and the consumer. The consumers don?t think that the product is available.

When in the process of buying a product based high effort behavior, the consumer needs information to decide on which product that best satisfies their need. There is a wide arrange of sources where this could be found. One of the most important, due to the great influence it has on consumer choice, is in-store communications. This is also one of the least developed sources. It is not uncommon that the only facts that can be acquired are found on product packaging and from contact with the store´s staff.

This report will present athesis on behalf of Eleiko Sports AB and carried out by two students at the InnovationEngineering (University of Halmstad). In this report the project participants willdescribe the project background along with the current product issues andneeds. A clear structure for participants, stakeholders and information flowbetween these parts will be included in this report so that you can clearly seethe areas of responsibility. The report includes a timetable which the grouphas worked along and also methods used. In the development process you will beable to read about how the students in an interdisciplinary way have used themethods and come up with an entirely new product.

The product "urinal funnel" for women has fascinated me for a long time. Not only because it solves a practical problem in a simple way, but also because it challenges our definitions of gender and behaviour. This report describes the process of making a new design for a funnel, taking material, ergonomics and construction in consideration. It also includes structuring a launching of the product in Sweden. It starts up with a large amount of information gathering, both by interviewing testgroup-perticipants, but also by researching and evaluating the range of existing funnels.

The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

In July 2011 the journalists Martin Schibbye and Johan Persson are arrested in Ethiopia when on a mission to report the activities of the oil exploration company Lundin Petroleum. Following a trial, closely observed by media, the two journalists are convicted to a prison sentence of eleven years. The Swedish Minister of Foreign Affairs, Mr. Carl Bildt, is now to act on their behalf to preserve their rights as Swedish citizens. However, doubts are raised as to whether Bildt has a conflict of interest because of his former engagements as a board member in Lundin Petroleum.

I will write about product placement in film from a Swedish point of view. This entails writing about Swedish films with different types of product placements, not only how they are done but also discuss how they succeed from a sales perspective. In my earlier work I have written about the product placement of watches. In this thesis I focus on the film series about the Swedish agent Carl Hamilton, since here you can see how Swedish film has developed during the past 30 years with regard to product placements. Both world politics and the concrete placements are illustrated in a clear way.

The advantages with product placement in blogs compared to traditional media is shown in earlier empirical findings where consumers found blog posts more credible and informative than a corresponding article in a web paper. It can therefore be argued that the informal structure and personal tonality of the blog reinforces the effects of product placement on brand attitude and intention to buy as the consumer has no persuasion knowledge and does not detect the rewriting of the product as commercial.This paper?s overall aim is to provide concrete implications for how to manage product placement on fashion blogs. The purpose of the essay is therefore to investigate the communicative effects of product placement in fashion blogs as well as to examine if a revelation of commercial interest behind a blog posts about a certain brand effects the consumers? attitude towards the blog and/or brand attitude and intention to buy.

The mission from IKEA of Sweden was to make a further development of their existing trolley in the FRAKTA -serial. IKEA wants that the new product would make the opportunities better for people who don't have cars to carry their goods home easily on the bus, train or walk after their purchase.The report includes a suggestion for a new product that will fit into the existing FRAKTA -serial. The new development product will continue the same standard as the other products in the serial and it will also make it possible for customers to carry their goods home by public transportations..

We have conducted a quantitative study investigating whether an Ingredient Branding collaboration between private label and national brands could be executed with success in the Swedish market. The objective was to measure the consumers? response to two products from different product categories, representing hedonic and utilitarian products. We have been able to establish that by adding a branded ingredient to a private label product, one obtains a more positive product attitude as well as a higher perceived product quality and taste. The study also shows that attitudes towards the ingredient brands were improved by the collaboration whereas the brand attitude towards the private label did not change significantly.